Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Specifications and General Maintenance
- Mercedes-Benz C-Class AMG: Common Problems
Important information to help you understand your Mercedes-Benz
Browse all: Specifications and General Maintenance
Common suspension noises and solutions
#1
Moderator Alumni
Thread Starter
![Exclamation](https://mbworld.org/forums/images/icons/icon4.gif)
I'm creating this thread because I see threads created on a weekly basis discussing the same kind of stuff over and over. I have gone through nearly every single noise (squeak or clunk) imaginable that can originate from the suspension. Im hoping this thread can be a collection of all of our best knowledge and become the place members can look for any sort of noise that may occur while owning a w203. Additionally, I am hoping to provide the most (cost) efficient means of pinpointing and resolving unwanted suspension noises.
I highly suggest purchasing a silicone based water resistant lubricant a spray and a grease - all suspension parts will have metal on rubber contact/friction and these types of lubricant last a LONG time and will not corrode your bushings.
Much of this stuff is straight forward to long time members, but hopefully this thread will help out our new members.
Front:
![Common suspension noises and solutions-strutspringmount.gif](https://mbworld.org/forums/attachments/c-class-w203/382846d1542322042t-common-suspension-noises-solutions-strutspringmount.gif)
![Common suspension noises and solutions-hubstubcastorcamberarms.gif](https://mbworld.org/forums/attachments/c-class-w203/382847d1542322042t-common-suspension-noises-solutions-hubstubcastorcamberarms.gif)
![Common suspension noises and solutions-torsionbarfront.gif](https://mbworld.org/forums/attachments/c-class-w203/382848d1542322042t-common-suspension-noises-solutions-torsionbarfront.gif)
Clunks:
1: Sway bar end links (50). This is the most common cause of clunks on the front suspension. The end link nuts may come loose and need periodic tightening.
2: Front Lower control arms (140). Take a look at the control arms and if they are leaking fluids - the bushings are worn and must be replaced. If you can find a hydraulic press, you can replace just the bushing, but most places will recommend replacing the entire arm because it can be purchased w/ the bushing in place.
3 (Aftermarket) (50): Adjustable sway bar end links. If your car is lowered (alot) and you have adjustable end links, you could potentially have your end links adjusted to be too long. The result is your long end link will knock with one of your lower arms. Not good. Shorten the arm or raise the car.
Squeaks:
1: Sway bar end link bushings (50). Spray with lubricant and go for a test drive. If the sound goes away, then you should replace the sway bar end links.
2: Sway bar bushings (20). Like all other bushings, these can get old and make noises. Apply lubricant liberally. Removing the brackets to get to the bushings is sort of a pain - there are very long bolts holding the brackets in place.
3: Strut bearings (115). This most commonly occurs when people have installed their suspension wrong after installing new parts. It has to be properly positioned in the strut tower otherwise it will make noises when turning and during driving. Additionally, this piece is known to wear down over time and compromise handling. Its a good item to replace and check if your car has noises from the front, but possibly the most difficult to deal with because it requires removing the entire strut/spring assembly.
Rear:
![Common suspension noises and solutions-rearspringshock.gif](https://mbworld.org/forums/attachments/c-class-w203/382849d1542322042t-common-suspension-noises-solutions-rearspringshock.gif)
![Common suspension noises and solutions-rearaxlesuspension1.gif](https://mbworld.org/forums/attachments/c-class-w203/382850d1542322042t-common-suspension-noises-solutions-rearaxlesuspension1.gif)
![Common suspension noises and solutions-reartorsionbar.gif](https://mbworld.org/forums/attachments/c-class-w203/382851d1542322042t-common-suspension-noises-solutions-reartorsionbar.gif)
![Common suspension noises and solutions-rearaxlesuspension2.gif](https://mbworld.org/forums/attachments/c-class-w203/382852d1542322042t-common-suspension-noises-solutions-rearaxlesuspension2.gif)
Clunks (not many clunk issues from the rear):
1: Sway bar bushing brackets (50/60). Need to be tightened - happens all the time to people installing new hardware.
2: Sway bar end link (70). Needs to be tightened - happens all the time to people installing new hardware.
Squeaks:
1: Sway bar bushings (20). These bushings are pretty well exposed to the elements under the car and can often wear down and need lubricating or replacing.
2: Sway bar end links (70). These endlinks have two ball joints in them when are notorious for failing and causing all sorts of noises and should be replaced. Replacing the arm requires a special 12 sided tool.
3 (aftermarket) Adjustable camber arms (470) - These arms are exposed to the elements and have two metal ball joints. Most arms come w/ a certain amount of lubricant on the arms - I suggest putting on tons. You WILL have to eventually reapply depending on the weather your car sees.
4: Lower control arm bushings (70/80) - These get old and could use replacing. This is the most difficult and time consuming rear suspension squeak to fix. Spraying w/ a lubricant does not work well to test it, so replace these as a last effort to eliminating your rear suspension squeak. If you have a hydraulic press you can replace just the arm, but there is another bushing that attaches to the rear wheel hubs that should also be replaced at this time. Just replace the whole arm for simplicity sake.
5 (not really suspension but too common): Rear lug bolts are too long. When installing new wheels (OR the spare tire), be sure to use the proper length for your lug bolts. Compare the length of your new wheels and lugs with your stock wheels and lugs. They should both come out the back side of the wheels roughly the same length. If you installed bolts that are too long, you will hear lots of noise and probably lose the functionality of your parking brake. You will have to have the parking brake mechanism replaced.
Hope this helps consolidate all of these topics into one giant thread.
Thanks to glyn for providing the images.
I highly suggest purchasing a silicone based water resistant lubricant a spray and a grease - all suspension parts will have metal on rubber contact/friction and these types of lubricant last a LONG time and will not corrode your bushings.
Much of this stuff is straight forward to long time members, but hopefully this thread will help out our new members.
Front:
![Common suspension noises and solutions-strutspringmount.gif](https://mbworld.org/forums/attachments/c-class-w203/382846d1542322042t-common-suspension-noises-solutions-strutspringmount.gif)
![Common suspension noises and solutions-hubstubcastorcamberarms.gif](https://mbworld.org/forums/attachments/c-class-w203/382847d1542322042t-common-suspension-noises-solutions-hubstubcastorcamberarms.gif)
![Common suspension noises and solutions-torsionbarfront.gif](https://mbworld.org/forums/attachments/c-class-w203/382848d1542322042t-common-suspension-noises-solutions-torsionbarfront.gif)
Clunks:
1: Sway bar end links (50). This is the most common cause of clunks on the front suspension. The end link nuts may come loose and need periodic tightening.
2: Front Lower control arms (140). Take a look at the control arms and if they are leaking fluids - the bushings are worn and must be replaced. If you can find a hydraulic press, you can replace just the bushing, but most places will recommend replacing the entire arm because it can be purchased w/ the bushing in place.
3 (Aftermarket) (50): Adjustable sway bar end links. If your car is lowered (alot) and you have adjustable end links, you could potentially have your end links adjusted to be too long. The result is your long end link will knock with one of your lower arms. Not good. Shorten the arm or raise the car.
Squeaks:
1: Sway bar end link bushings (50). Spray with lubricant and go for a test drive. If the sound goes away, then you should replace the sway bar end links.
2: Sway bar bushings (20). Like all other bushings, these can get old and make noises. Apply lubricant liberally. Removing the brackets to get to the bushings is sort of a pain - there are very long bolts holding the brackets in place.
3: Strut bearings (115). This most commonly occurs when people have installed their suspension wrong after installing new parts. It has to be properly positioned in the strut tower otherwise it will make noises when turning and during driving. Additionally, this piece is known to wear down over time and compromise handling. Its a good item to replace and check if your car has noises from the front, but possibly the most difficult to deal with because it requires removing the entire strut/spring assembly.
Rear:
![Common suspension noises and solutions-rearspringshock.gif](https://mbworld.org/forums/attachments/c-class-w203/382849d1542322042t-common-suspension-noises-solutions-rearspringshock.gif)
![Common suspension noises and solutions-rearaxlesuspension1.gif](https://mbworld.org/forums/attachments/c-class-w203/382850d1542322042t-common-suspension-noises-solutions-rearaxlesuspension1.gif)
![Common suspension noises and solutions-reartorsionbar.gif](https://mbworld.org/forums/attachments/c-class-w203/382851d1542322042t-common-suspension-noises-solutions-reartorsionbar.gif)
![Common suspension noises and solutions-rearaxlesuspension2.gif](https://mbworld.org/forums/attachments/c-class-w203/382852d1542322042t-common-suspension-noises-solutions-rearaxlesuspension2.gif)
Clunks (not many clunk issues from the rear):
1: Sway bar bushing brackets (50/60). Need to be tightened - happens all the time to people installing new hardware.
2: Sway bar end link (70). Needs to be tightened - happens all the time to people installing new hardware.
Squeaks:
1: Sway bar bushings (20). These bushings are pretty well exposed to the elements under the car and can often wear down and need lubricating or replacing.
2: Sway bar end links (70). These endlinks have two ball joints in them when are notorious for failing and causing all sorts of noises and should be replaced. Replacing the arm requires a special 12 sided tool.
3 (aftermarket) Adjustable camber arms (470) - These arms are exposed to the elements and have two metal ball joints. Most arms come w/ a certain amount of lubricant on the arms - I suggest putting on tons. You WILL have to eventually reapply depending on the weather your car sees.
4: Lower control arm bushings (70/80) - These get old and could use replacing. This is the most difficult and time consuming rear suspension squeak to fix. Spraying w/ a lubricant does not work well to test it, so replace these as a last effort to eliminating your rear suspension squeak. If you have a hydraulic press you can replace just the arm, but there is another bushing that attaches to the rear wheel hubs that should also be replaced at this time. Just replace the whole arm for simplicity sake.
5 (not really suspension but too common): Rear lug bolts are too long. When installing new wheels (OR the spare tire), be sure to use the proper length for your lug bolts. Compare the length of your new wheels and lugs with your stock wheels and lugs. They should both come out the back side of the wheels roughly the same length. If you installed bolts that are too long, you will hear lots of noise and probably lose the functionality of your parking brake. You will have to have the parking brake mechanism replaced.
Hope this helps consolidate all of these topics into one giant thread.
Thanks to glyn for providing the images.
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Last edited by Glyn M Ruck; 12-21-2014 at 09:25 AM.
The following 14 users liked this post by TruTaing:
2008BenzML550 (04-03-2021),
anerussis (06-18-2016),
arandomguy (03-25-2018),
Bülent ULUÇ (07-28-2021),
Benzallo (01-05-2020),
and 9 others liked this post.
#3
Super Member
Join Date: Jun 2005
Location: So. Cal.
Posts: 651
Likes: 0
Received 5 Likes
on
5 Posts
'02 C320 Wagon, '78 308 GTS, '06 Highlander Hybrid
Clunks:
1: Sway bar end links (50). This is the most common cause of clunks on the front suspension. The end link nuts may come loose and need periodic tightening.
2: Front Lower control arms (140). Take a look at the control arms and if they are leaking fluids - the bushings are worn and must be replaced. If you can find a hydraulic press, you can replace just the bushing, but most places will recommend replacing the entire arm because it can be purchased w/ the bushing in place.
3 (Aftermarket) (50): Adjustable sway bar end links. If your car is lowered (alot) and you have adjustable end links, you could potentially have your end links adjusted to be too long. The result is your long end link will knock with one of your lower arms. Not good. Shorten the arm or raise the car.
Squeaks:
1: Sway bar end link bushings (50). Spray with lubricant and go for a test drive. If the sound goes away, then you should replace the sway bar end links.
2: Sway bar bushings (20). Like all other bushings, these can get old and make noises. Apply lubricant liberally. Removing the brackets to get to the bushings is sort of a pain - there are very long bolts holding the brackets in place.
3: Strut bearings (115). This most commonly occurs when people have installed their suspension wrong after installing new parts. It has to be properly positioned in the strut tower otherwise it will make noises when turning and during driving. Additionally, this piece is known to wear down over time and compromise handling. Its a good item to replace and check if your car has noises from the front, but possibly the most difficult to deal with because it requires removing the entire strut/spring assembly.
1: Sway bar end links (50). This is the most common cause of clunks on the front suspension. The end link nuts may come loose and need periodic tightening.
2: Front Lower control arms (140). Take a look at the control arms and if they are leaking fluids - the bushings are worn and must be replaced. If you can find a hydraulic press, you can replace just the bushing, but most places will recommend replacing the entire arm because it can be purchased w/ the bushing in place.
3 (Aftermarket) (50): Adjustable sway bar end links. If your car is lowered (alot) and you have adjustable end links, you could potentially have your end links adjusted to be too long. The result is your long end link will knock with one of your lower arms. Not good. Shorten the arm or raise the car.
Squeaks:
1: Sway bar end link bushings (50). Spray with lubricant and go for a test drive. If the sound goes away, then you should replace the sway bar end links.
2: Sway bar bushings (20). Like all other bushings, these can get old and make noises. Apply lubricant liberally. Removing the brackets to get to the bushings is sort of a pain - there are very long bolts holding the brackets in place.
3: Strut bearings (115). This most commonly occurs when people have installed their suspension wrong after installing new parts. It has to be properly positioned in the strut tower otherwise it will make noises when turning and during driving. Additionally, this piece is known to wear down over time and compromise handling. Its a good item to replace and check if your car has noises from the front, but possibly the most difficult to deal with because it requires removing the entire strut/spring assembly.
Henry
#4
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Great job Tru! - If others have other experiences this is the place to post them - Let's keep the whole lot in one place!
Good example - Front sway bushes from Henry.
Good example - Front sway bushes from Henry.
The following users liked this post:
jocaho (10-18-2022)
#7
Moderator Alumni
Thread Starter
++
If you're not getting a clunk while driving, I imagine your issue to be something steering (rack) related. Maybe someone w/ more experience w/ steering can chime in.
If you're not getting a clunk while driving, I imagine your issue to be something steering (rack) related. Maybe someone w/ more experience w/ steering can chime in.
Trending Topics
#8
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
If it's non of the issues covered by Tru's comments then check Rack bolts & rack bushes.
The following users liked this post:
DappaDan (06-12-2017)
#9
MBWorld Fanatic!
Join Date: May 2009
Location: Toronto, NYC
Posts: 1,101
Likes: 0
Received 4 Likes
on
4 Posts
2002 Mercedes Benz C230 Coupe
Great thread! One of the most useful on this forum!
Thanks Tru.
Just one helpful tidbit:
The front lower control arms are made from aluminum (silverish in color)
The front upper control arms are made from stainless steel (black in color)
Most independent parts suppliers know the difference only by the color, so keep this in mind.
Thanks Tru.
Just one helpful tidbit:
The front lower control arms are made from aluminum (silverish in color)
The front upper control arms are made from stainless steel (black in color)
Most independent parts suppliers know the difference only by the color, so keep this in mind.
#10
Newbie
Join Date: Jul 2008
Location: Cincinnati
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Black C320
Thank you for the thread!
I had clunk/rattle up front from sway bar end links. I replaced them and problem solved... for a month. haha
My car's lowered on H&R Sport springs and needs shorter sway bar end links, IMHO. Cause it eats stock sway bar end links like candy.
But where do I get shorter sway bar end links?
Thanks!
I had clunk/rattle up front from sway bar end links. I replaced them and problem solved... for a month. haha
My car's lowered on H&R Sport springs and needs shorter sway bar end links, IMHO. Cause it eats stock sway bar end links like candy.
But where do I get shorter sway bar end links?
Thanks!
#12
Moderator Alumni
Thread Starter
Thank you for the thread!
I had clunk/rattle up front from sway bar end links. I replaced them and problem solved... for a month. haha
My car's lowered on H&R Sport springs and needs shorter sway bar end links, IMHO. Cause it eats stock sway bar end links like candy.
But where do I get shorter sway bar end links?
Thanks!
I had clunk/rattle up front from sway bar end links. I replaced them and problem solved... for a month. haha
My car's lowered on H&R Sport springs and needs shorter sway bar end links, IMHO. Cause it eats stock sway bar end links like candy.
But where do I get shorter sway bar end links?
Thanks!
Also, I havent heard of anyone on H&R springs that has ever had this issue.
BTW - the last time I heard about adjustable front sway bar end links was from Code3Performance. I dunno where they have gone.
Last edited by TruTaing; 08-18-2010 at 01:22 AM.
#13
Newbie
Join Date: Jul 2008
Location: Cincinnati
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Black C320
![Arrow](https://mbworld.org/forums/images/icons/icon2.gif)
If your springs are not cut, I dont believe your H&R sport springs would be so low that your end links need to be shortened. Your tires would need to be tucked for you to bang your sway bar/end links against the lower arms (i know this all too well - its why my car is raised to where i have about a finger's gap between the tire and the top of the fender up front). Your end links are probably just worn down over time.
Also, I havent heard of anyone on H&R springs that has ever had this issue.
BTW - the last time I heard about adjustable front sway bar end links was from Code3Performance. I dunno where they have gone.
Also, I havent heard of anyone on H&R springs that has ever had this issue.
BTW - the last time I heard about adjustable front sway bar end links was from Code3Performance. I dunno where they have gone.
Something is killing my sway bar end links quickly. It may be the AMG reps too. I think I killed the sway bar end link going over a speed bump while turning... But I don't need them anyway.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#14
Super Member
Join Date: Apr 2010
Location: New Joisey
Posts: 858
Received 0 Likes
on
0 Posts
13 Jeep JKU Sahara w/4" lift Kit & the works,2015 Toyota Sienna XLE,2013 Hyundai Sonata Hybrid
very very informative ...thankx Tru.....I vote for sticky too.......now when I am down there I will be lubricationg all the bushings for sure.....
#16
MBWorld Fanatic!
Join Date: Oct 2004
Location: NJ, NYC
Posts: 4,152
Likes: 0
Received 57 Likes
on
46 Posts
Something Slow
Part Number Please on Upper & Lower Arms.. am thinking of changing out mines :-)
good info tho.. Tru!
Also would the C32 & other W203 Would carry the Same Part number?
thank YOu
good info tho.. Tru!
Also would the C32 & other W203 Would carry the Same Part number?
thank YOu
Last edited by WaveyKat; 11-08-2010 at 01:01 PM.
#17
Senior Member
Join Date: Jul 2007
Location: Scottsdale, AZ
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
'05 C230
Any idea on how much it would run me to replace this. Thanks!
#18
Super Moderator
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#21
MBWorld Fanatic!
Just FYI. I'll post up the results.
The following users liked this post:
Greg Northcott (08-24-2021)
#23
Banned
Join Date: Aug 2010
Location: KC, MO
Posts: 997
Likes: 0
Received 1 Like
on
1 Post
"annoyance" and "self-righteousness", amoung others...
My car does this stuff, too, and it is not a steering rack problem. Getting new swaybar endlinks and bushings this week to solve the speed bump problem. They're also going to dig deep to diagnose the pop-pop-pop or knock-knock-knock sound but they have said it is not the rack.
Just FYI. I'll post up the results.
Just FYI. I'll post up the results.
I could look into it further for you, but basically I remember them telling me they replaced the "upper portion" of the strut assembly. Whatever that means. It fixed 90% of the problem. I still probably have and endlink issue.
#24
Super Moderator
I had this problem. Driver's front side. Fixed at dealer.
I could look into it further for you, but basically I remember them telling me they replaced the "upper portion" of the strut assembly. Whatever that means. It fixed 90% of the problem. I still probably have and endlink issue.
I could look into it further for you, but basically I remember them telling me they replaced the "upper portion" of the strut assembly. Whatever that means. It fixed 90% of the problem. I still probably have and endlink issue.
i bet this is what they replaced.
#25
MBWorld Fanatic!
Yep, I bet that's it, too. I'm trying to decide right now how much longer to keep the Benz and decide from there just what level of reconditioning I am going to do.