For Sale: H&R Front Sway Bar!
#1
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Charlotte, NC
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
C320 4Matic & GLK350 4Matic
For Sale: H&R Front Sway Bar!
I purchased a slightly used H&R front sway bar from a member on here that stated it would fit a 4matic. In short, it doesn't. I'm selling this part for that reason alone. It is a beast of a bar. I'm asking $250 obo. It doesn't do me any good since it doesn't fit. Below you could see the stock 4matic bar next to the H&R and the difference in shape.
Last edited by Tri-Star; 08-20-2012 at 10:30 AM.
#3
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Charlotte, NC
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
C320 4Matic & GLK350 4Matic
Yes as long as it is rear wheel drive. I'd have to convert my car to RWD, which I'd rather not do. Awesome part, my entire car is H&R except the front sway, which is upsetting. Damn 4matic
Last edited by Tri-Star; 08-20-2012 at 10:31 AM.
#4
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Charlotte, NC
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
C320 4Matic & GLK350 4Matic
It will fit the following models: (Non-4matic)
w203: c230, c320, c350 c32, c55
w209: clk320, clk350, clk500, clk550, clk55
w203: c230, c320, c350 c32, c55
w209: clk320, clk350, clk500, clk550, clk55
#5
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
There is a difference between 10mm endlink and 12mm endlink. Of course you can drill it out from 10 to 12, but you cant put 12 on 10 unless you drill the endlink hole on the strut.
So NO it does not fit all 203 without making the endlink holes proper size.
So NO it does not fit all 203 without making the endlink holes proper size.
#6
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Charlotte, NC
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
C320 4Matic & GLK350 4Matic
If anyone has any questions you can contact H&R directly with your make & model, however the information above was pulled from their website.
Last edited by Tri-Star; 08-29-2012 at 12:04 PM.
Trending Topics
#9
Moderator Alumni
Ive got this exact sway bar on my car. Its awesome. Get it + AMG end links + mod the struts to fit the AMG links. Completely worth it. Every penny. Its magical! GLWS!
#10
MBWorld Fanatic!
Join Date: Dec 2006
Location: Toronto, Canada
Posts: 1,105
Likes: 0
Received 9 Likes
on
9 Posts
2019 C300 Wagon; '75 Triumph TR6; previous: 2004 C230 6spd sold after 17 years of driving
I put a C32 f & r sway bar on my stock C230 (non sport) and the difference is night and day, best $50 mod (not including the end links) I have ever done. I had to drill out the tab on the strut which I did in two parts, stepping the drill sizes rather than drill a bigger hole right away (7/16 15/32) good luck finding a 12mm bit. There was no problem drilling the hole (soft steel)
#11
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Charlotte, NC
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
C320 4Matic & GLK350 4Matic
Thanks for the info guys. Really wish I could have had this installed. The H&R bar is so much nicer than stock and I could only imagine how it would drive. Arg!
#13
MBWorld Fanatic!
The Bilstein struts come with a little adapter you put in the 12mm hole to make it 10mm. Not sure how readily available this little widget is, but they are out there.
#15
Moderator Alumni
#16
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Charlotte, NC
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
C320 4Matic & GLK350 4Matic