Update on my mags and suspension
04-08-2004, 09:02 PM
#1
Almost a Member!
Thread Starter
Join Date: Jul 2003
Location: CANADA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Update on my mags and suspension
HI folks i installed a few weeks ago the H&R cupkit, i must say i'm pretty happy with my purchase. The only thing is that i find that it didn't drop the front enough... but hey for 610$ i can't complain. I also installed my 19x8,5 wheels with 235/35/19 tires. That was he hard part, since the mag is less think then the stock ones my bolts would it the parking break in the back. So i had to cut the stock bolts by about a 1/4 inch and play arround with it. Also my calipers would just slitly rub on the mags so i had to grind them up. All this to say that it took me about 2 hrs to cut,grind and install my wheels. But omg the car is pimping, ive had great reaction and boy people turn their heads when they see me coming.
I would like to thank you guys for helping me on my questions these past few months. Its been greatly appreciated.
And yes pics will be coming soon
I would like to thank you guys for helping me on my questions these past few months. Its been greatly appreciated.
And yes pics will be coming soon
04-10-2004, 10:21 AM
#5
Almost a Member!
Thread Starter
Join Date: Jul 2003
Location: CANADA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
04-10-2004, 02:31 PM
#7
Almost a Member!
Thread Starter
Join Date: Jul 2003
Location: CANADA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
its actualy pretty good, not that bumpy, the only thing i find is that when taking curves at high speeds, since my tires are very think (side wall) the tire rubs on the sides and starts to slip. i think i was better off with my 16 inch tires when it comes to curves. Cause now i'm scared that the mag will rub on the ground. And i think one of the rear bushings died cause its squeeking like a ****...
