Clear bumper markers installed!
Hope that helps.
I have an '08 C63 (scored this baby about a month ago with only 17K kms!!!) and I JUST swapped out my sidemarkers for lightly smoked ones.
Verdict?? EASY as pie!!! As shown, just pop out a couple or all 3 of the plug/anchors on both sides of the wheel well so you have access from the outside to re-fit the inside housing back onto the sidemarker (actually, not necessary from the passenger side but go for it). I bought my lenses on eBay and they fit perfect.
If you need any additional assistance please do not hesitate to ask me! It was a very easy process and only took about 5-7 mins per side.
The Best of Mercedes & AMG
I went through the hood, didn't remove anything. Since my hands wouldnt reach the marker light location I used a 12" metal ruler to depress the tab to remove the stock lenses. I then used the same ruler to hold the stock bracket firmly in place from behind while I popped in the new lens from the front. Took me about 10-mins as well.
Last edited by mhass350; Sep 1, 2011 at 04:12 PM.
Also he has different listings for models 08-09 and 10, do the shapes differ from these years? TIA for any answers someone may give
https://mbworld.org/forums/c-class-w...er-lights.html
Just wanting to do this on my C350 and while I do follow vaguely about how to do it, can anyone quickly write up a step by step instruction for this? Please keep in mind I am a complete noob when it comes to DIY stuff, so would really appreciate details, even the one's you think would be obvious. I am going with the clear one's on ebay for my white C350. I see one for around $70 with the chromed out bulbs, that seems to be my only choice?
Thanks guys.
Photos:
- Old marker with torx screw shown
- Inside wheelwell showing black housing w/torx screw half out
- Torx screw. Use small screwdriver. Even this one was too big!
- New marker with black housing taken out.
- New one installed.
- All done

Last edited by SilverStallionC; Mar 4, 2014 at 03:57 AM. Reason: Misspelled word.






