DIY - License Plate Lights

Tools:
Flat head screw driver
Torx screw driver
Steps:
1. You will need to remove the trunk lid cover, first of remove the plastic material. There will be 4 torx screws and 3 plastic fasteners.
2. Disconnect the auxiliary light power...
3. Now remove the rest of the trunk lid cover by taking off the remaining plastic fasteners.
4. Disconnect the power to the emergency trunk release...
5. At this point, you should have been able to remove the trunk lid cover... Now you can see the location of the license plate bulbs.
6. LEDs ... Woooooooooot!

7. Test to make sure you have the LEDs in the right way. Tuck everything in...
Decided to install LEDs for the trunk light as well

Trending Topics
I was on the first group buy, I believe they are having a second one...
https://mbworld.org/forums/c-class-w...round-2-a.html
The Best of Mercedes & AMG
Should be enough room to maneuver, but I am super **** and paranoid that I don't want to bend the liner too much. Hence just decided to take it off.

I was on the first group buy, I believe they are having a second one...
https://mbworld.org/forums/c-class-w...round-2-a.html








