IgorDj

Just got a xpipe installed, and would like to get new mufflers do the quad exhaust.

Anyone know which stainless steel mufflers i can get that will fit on the c300

dont care i the mufflers have 1 exhaust port or 2, cause ill just get a Y pipe done for the quad tip.

Thanks

glovemoney

ZeroSeVen

You can fabricate a Y pipe on yor stock exhaust if all you want is the quad tip look.

But if you want to replace the muffler with a true quad tip such as Eisenmann or Meisterschaft then you don't need to fabricate a Y pipe. If you want a less expensive alternative you can go with Magnaflow.

tanktube67

Do you want to do just the quad or you want to replaced the mufflers?

IgorDj

I wanna replace the mufflers cause the stock ones just destroy the sound of he magnaflow xpipe. But I'm not allowed to do a straight pipe cause that will go passed my "loudness" law here in Calgary, Alberta. So I'd like to remove the current ones and replace with new ones that give it a meaner growl. Dont wanna spend too much. And like I said before if the new muffler comes with 1 exhaust I'll fabricate a Y pipe for quad tips but if the new
Muffler is built for quad tip that's cool too. Also. Anyone know the sizing of exhaust tips. I don't wanna keep the oval looking Mercedes tip. But get black painted circle tips. Thanks

IgorDj

Link to website for pricing?? Seems like a 1g-2g $$ system

Spec_Davis

it is a little pricey but you will love the sound. check youtube and type Meisterchaft you will find vids of it installed.

ZeroSeVen

Prices are pretty standard across the board unless you purchase it used.

Meisterschaft is around $2000 for the quad exhaust + shipping/taxes/ installation costs

Eisenmann is $3,200 + shipping/taxes/installation costs

Check out tanktube's Magnaflow exhaust set up... It's neat looking without spending $$$$

IgorDj

I dont need Meistershaft cause thats the whole exhaust setup right?

Ya i msge'd tanktube about the magna flow setup, he didnt tell me which part though lol
ima go to tunerworks and ask them what they got for me.

Just looking for a cheap muffler replace that would drown the sound like the stock ones do, and if they are stainless steel thats good.

Anyone know where i can buy good exhaust tips.
and what size do i need?

Richie999

Flowmaster? Borla?

Mixedfruits

no muffler

tanktube67

You got pm

Petje

Vath also had quad exhausts

IgorDj

aight thanks.
Ill be looking for parts.
How much do you think i should spend per muffler??

jpdaballa

i just got magnaflows, i didn't like them until i got an xpipe but you have one already so it should be fine, just remember the smaller the muffler the louder they are, the magnaflows wont be abnoxiously loud, its a nice loud though i'll post a sound clip soon

you can find used magnaflow mufflers for like 60-100 but you'll need two, and magnaflows have lifetime warranty

tanktube67

From $140,00 to $179.00 each

Richard2011

I noticed that the inlets and outlets are 2.5" instead of 2.25", and I searched the Magnaflow website, and it seems that that's the only size they have for the 4"x9" oval same-side design in the right length. Will this be a problem if I intend on using the stock tips?

Also, how do Magnaflow mufflers compare to straight pipes?

jpdaballa

Definitely not as loud but it'll sound better. I have magnaflows with x pipe I'm just waiting for a nice night to record a Clip

jpdaballa

Magnaflow will sound better than a straight pipe

IgorDj

Im wondering the same thing richard

i know my xpipe is 2.25 so will 2.5 work?

and do i want a same side offset
or center to center>
cause i dont know how the quad tip will work?
will it be a straight Y pipe or curved?

Richie999

Great question...are Magnaflows loud like a Flowmaster?

glovemoney

Either 2.25 or 2.5 will work as they will weld them on. 2.5 might be easier as it fits iver the pipe.

IgorDj

K so what size of exhaust pipes do i get??

ill go with 2.25" IN, but what about the length???
the muffler im going with is part # 11376 and exhaust # 35168
*go to magnaflow and enter those numbers to see parts*

will that combination work??

jimmythegreek

I have the magnaflows and the magnaflow quad tips on my 350. I used the 2.25" and the quad square rolled tips. I got them for alot cheaper than advertised. I went polished stainless looks better. The exhaust shop will expand both sides of the mufflers for slip on to stock exhaust pipes and the tips. I will tell you that Im removing the magnaflow tips tho. I searched for days for a staggered setup and all I could find is one by Corsa. they are not wide enuff to fill the C63 diffuser tho. Im gonna have to get 4 tips and fabricate a proper tips for these cars. If you dont have staggered tips one is flush and the outside one is 1" plus out of the rear, doesnt look bad, but not what I was looking for. If you need the part #s I can get them for you and where to order cheap. I got the smaller ones and its got a nice growl, its def louder than stock. smaller muffler more noise. See how small teh meisterschafts are compared to stock, half the size

jimmythegreek

heres teh pics to my magnaflow setup

https://mbworld.org/forums/c-class-w...-new-whip.html



14375 is the muffler

35170 is the tips I used

my other choice of tips I liked was
35169. no matter what tips you use its gonna stick out on the outside cause the bumper is curved