Don Nguyen

I am going to be blowing out some over stocked vinyl that I have, to clear up my excess inventory a bit.

First up is my roll of satin black vinyl material. I either have enough for an entire car or I can split it up into smaller sections, based on whatever lengths you need.

Price will depend on the exact length you need. PM me the amount and I'll get you a price.

This is what satin black looks like:





I also have a roll of bright green vinyl, kind of like GT3RS green that I'll take pictures of when I get a chance.

In addition to the rolls above, I'll be discounting all of my matte black, gloss black, 3M 1080 gloss carbon fiber and 3M di-noc matte carbon fiber vinyl materials at 20% off of my regular prices.

Shoot me a PM or e-mail for questions/inquires.

thanks.

-Don

donathon@gmail.com

Don Nguyen

Just to give you guys an idea of pricing on the satin material. For a roof sized sheet, it'll be $20 + shipping.

Let me know if you guys have any questions or inquires. I will have the lowest prices anywhere for vinyl for the next couple of weeks.

Also, don't forget, in addition to roofs, I can also cut it up into strips and sell it to you to use on your window trims. Here are pictures of an Audi B7 that I vinyl wrapped the window trim in my matte black material to black out his chrome.

Before:





After:









-Don

donathon@gmail.com

Invain15

how much do you need to wrap the trim on our cars?

C300BLK

+1

Invain15

Do you have any pics of the 1080 gloss compared to the Matte Di-noc

Don Nguyen

Which trim?

All of my carbon fiber pictures are posted here in this thread on e46fanatics:

http://forum.e46fanatics.com/showthr...=12&highlight=

-Don

JaCe88

Hey Don, do you have pre cut pieces for the gloss around the windows on the w204 sedan? How much would we be looking at to get that landed in Sydney Australia (postcode 2000)?

Alternatively I'm flying to New York in a couple of weeks for work so I might give you my NY addy to post it to.

Don Nguyen

I do not work with or use pre cut pieces, because even the slightest change in direction the material, you'll end up having to trim it to fit anyways and it may end up being too short in other areas.

If you're looking to wrap the chrome on your windows, I can sell you cut strips in the rough size you'll need to apply them. I think shipping to Australia is like $25 dollars and shipping to NY would be $5 dollars for the window trim vinyl.

For comparison sakes, here's pictures of gloss black on this white F10 550i BMW. Been starting to get more of these, as people start purchasing more of these cars. As you can see here, this is my gloss black vinyl material. If you want to go with as close as you can to a panoramic/glass/gloss black paint look, then this is your best option. Owner was around orange county and came out to me in Anaheim Hills to have the roof wrap done.













-Don

donathon@gmail.com

e23chan

Sent my payment Don. Can't wait for the material. Again, beautiful work.

Don Nguyen

Thanks. Let me know how it goes and PM/e-mail me if you have any other questions.

Don Nguyen

I've been getting a lot of people PMing me that they want the satin/matte finish, but those are two different finishes and I just wanted to post pictures of matte black in this thread to show the differences between the two.

So here is a white Subaru STI that I wrapped the roof in my matte black vinyl material.













-Don

donathon@gmail.com

Don Nguyen

I wanted to post some more pictures of satin black, since that's what this sale/thread is mainly for. I had to dig through some older pictures of guys that bought the satin black vinyl material from me and that DIYed it themselves. Here is a Mazda that bought some satin black vinyl material from me to do his roof with. His roof spoiler is CF, and I think his trunk was carbon fiber as well. It'll give you guys a better idea of how the satin black is in comparison to those pieces. Similar to the 350z in the original post with the satin black roof, the owner of this Mazda DIYed the roof install on his car with my satin black vinyl material.

Satin black:






-Don

Donathon@gmail.com

Don Nguyen

Found some more pictures of my satin black material on the same 350z that's posted above in the original post. Not the best pictures in the world, but hopefully it'll still give you guys a better idea of the finish and how it looks on the car.







-Don

donathon@gmail.com

Don Nguyen

Christmas may be over, but I am continuing this until I get rid of all of my satin black material. Unfortunately, I do not have any more pictures of the satin black, but hopefully the ones that I have already posted above will be good enough for you guys to determine the differences and how it looks compared to the other finishes.

Here's a white BMW F10 535i that I recently worked on. I vinyl wrapped the chrome on this car's window trim with my matte black material. It really changes the look of the car completely, since the chrome doesn't match anything else on the car and the window trim especially takes up such a large real estate on the car when looking at it. We went with my matte black vinyl material for the window trim to match the rubber and door pillars that were also already matte black from the factory. The owner of this car was around south Orange County, and I happened to be in that area from Irvine that day so I dropped by to do the vinyl work on his car.

Before:




After:






-Don

donathon@gmail.com

Don Nguyen

I've had people PM me to see if they can use my materials to wrap their interior trim pieces, and the answer to that is yes. I figure I'll post some pictures for you guys to show you some examples of how it looks like. Even though I am not much of a carbon fiber person myself, I think it makes the interior trim pieces look great. The material is even textured, so it has a nice feel to it.

Here's pictures of an E92's interior that I wrapped in the 3M carbon fiber di-noc vinyl material:









Here's the center console area and side door switches on a 350z:










-Don

donathon@gmail.com

Don Nguyen

I've had people PMing me for pictures of the carbon fiber material. So I am going to repost these pictures here in this thread for those who haven't seen pictures of it in my other threads.

Here's another car that I did while I was up in norcal doing some vinyl wraps. This car was around the Hayward area. The car is a white IS250, and I did his roof in the 3M 1080 gloss black carbon fiber material. It was the first car that I actually had used the material on for the roof. These pictures will also give those who have other cf parts a good idea of how the carbon fiber 3M 1080 vinyl looks compared to it. Don't mind the uneven marks, those were just water streaks from when I wiped the roof down in the heat. The camera picked those up more than how it looked like in person, or else I would have cleaned it better













-Don

donathon@gmail.com

Don Nguyen

This is kind of a two for one deal, so there's going to be more pictures in this post than usual. This white 3rd gen Lexus GS300 came by to have me install a gloss black vinyl roof on his car and while he was here he also decided to tint/smoke his rear tail lights as well. We went with the gloss black vinyl for his roof to give it a factory panoramic look. For the tail lights, I tinted the whole thing and then cut out the clear portions for him. I included a picture that shows what it would have looked like with the clear portion tinted compared to it with the clear portion cut out. The owner of this car came out to me in Anaheim Hills from around Cerritos/north Orange County.

Before:




During (left/driver side is completely tinted, and the right/passenger side has the clear portion cut out):


After:
















-Don

donathon@gmail.com

Don Nguyen

I am still getting PMing me about pictures or what the differences are between the two carbon fiber materials. So I'll go ahead and just post some pictures of the 3M di noc matte carbon fiber on cars instead of the those interior trim pieces that I have already posted, so you can kind of have a better visual.

























-Don

donathon@gmail.com

Sentosa

Can you PM a price for a piece 2200mm long x 1200mm wide and cost to post to Australia to postcode 4573 in Gloss Black. It's for a C Class Estate.

Don Nguyen

PM sent.

-Don

Don Nguyen

Gloss black vinyl roof that I wrapped on a white C350 to give it the panoramic roof effect/look. Owner of this car was in Irvine/Tustin as well. Pretty simple and straight forward look/style













-Don

donathon@gmail.com

Benz-o-matic

Don I'm looking for a vinyl that has the look of the 3M 1080 gloss black, but with a thick gloss layer over it so that it looks like real carbon fiber trim. I can't seem to find a workable vinyl that has that this varnish looking coat on top like real (non dry) carbon fiber trim. Any suggestions? Trying to wrap a diffuser.

csxian

Do you have an overlay for the sidemarker in a matte or gloss black for 2010 C300? How much shipped to 98122? I know it is only small pieces

killerg

could you pm the price of 12" x 65" roll of satin black vs a matte black roll of the same price

myinternetsucks

Pm me a quote for 1080 scotchprint carbon roof, and removal of my old di-noc?