- Mercedes-Benz C-Class and AMG: How to Replace Tail Lights
Step by step instructions for do-it-yourself repairs
Browse all: Lighting Guides
DIY - Facelift Tail Lights
The load resisitors are 50W. As you can see from the photo I mounted them to floor panel. I've tied off the wires after this photo was taken. There is plenty of room around resistors for cooling.
I drove around for a half hour with lights on and checked the resistors. They were warm but I could still press my finger on them without burning. No label from China.
- Fit and finish are great with no issues installing.
- No error codes on dash.
- Unit does hum a bit from the resistors but you can't hear them inside car.
- Big improvement over old stock lights.
Nice job mounting it. You have to admit though, that is a very strange tail light setup.
Posted from Mbworld.org App for Android
The Fog LEDs are on the top row. They are not lit up in the photos and they also don't light up when breaking.
Btw what bulbs are you used for eyelids? Yesterday I'm just try with LED and have error on my instrumen cluster. My car is C300 AMG Sport 09.

That's a bummer. I still have OEM bulbs right now but going to order clear side markers next. Search the forum on "LED eyelids" for help.
The Best of Mercedes & AMG
The load resisitors are 50W. As you can see from the photo I mounted them to floor panel. I've tied off the wires after this photo was taken. There is plenty of room around resistors for cooling.
I drove around for a half hour with lights on and checked the resistors. They were warm but I could still press my finger on them without burning. No label from China.
- Fit and finish are great with no issues installing.
- No error codes on dash.
- Unit does hum a bit from the resistors but you can't hear them inside car.
- Big improvement over old stock lights.
Posted from Mbworld.org App for Android
Originally Posted by Bosnia1992
Snow, how did you reduce the buzzing on your left side ?
Posted from Mbworld.org App for Android
I went with OEM because the aftermarket tail lights won't work with my car
Posted from Mbworld.org App for Android
the only way is to add resistor to oem taillight.

and not forget the shipping to and back from euro for them to programe the sam. this could sum up to ridiculous amount
but the look really a killer








