- Mercedes-Benz C-Class: How to Install Illuminated Star Grille Emblem
Step by step instructions for do-it-yourself repairs
Browse all: Exterior Guides
Illuminated star fitted.
Thank you in advance.
John
Its a good idea to stop and ask questions in the install if you are unsure, the wait is much better than breaking a tab on expensive plastic pieces. Trust me, haha.
Last edited by JaredP; Jun 11, 2014 at 07:45 PM.
Its a good idea to stop and ask questions in the install if you are unsure, the wait is much better than breaking a tab on expensive plastic pieces. Trust me, haha.
I pulled the whole grill out and then removed the star by pressing on the back tabs and then it snapped out.
John

Here are the part numbers :
207-817-04-16 - Star
207-820-00-00 - Electrical harness
207-820-02-04 - Electrical cable with fuse holder
BQ6880133 MB kit
I love your S204. My wife absolutely loves it too and would have gone for that if it were available here. I take it the 250 estate is a european only model ?
The Best of Mercedes & AMG


Last edited by capt_paul; Jun 25, 2014 at 05:24 PM.


As the system only is lit when locking and unlocking your car in dark ambient light I wanted to rewire it for permanent illumination.
The star is luckily using 12V so I simply hooked it up to the headlight parking lights (the C in the headlight)
By doing this the star is lit just as it should if hooked up with the CAN unit but now it is also permanetly lit as long as the parking lights are, and that is with darker ambient lighting.
Hi Vic viper, may I ask when you hooked the illuminated star to your parking light did it trigger any warning lights? I have a 2013 c63 and I had it set up to the control unit that only allows it to lid when unlock/open door. I took it to a mechanic and asked them to hook it to the parking light, but they say it requires cutting/damaging the factory wires, and it might trigger warning lights in the instrument cluster.
Could you please explain how you did it? does it mean you don't need the control unit anymore?
Thanks in advance!
The hardest part was getting the pink/yellow wire out of the connector. Unscrewing the SAM was a pain too. Got it done though.
Did you installed it with all the parts mentioned in the installation guide posted by capt_paul? The illuminated star wiring harness, and the Y wiring harness?
A207 817 04 16, star assembly - $295
A207 820 00 13 wiring harness - $60
A166 900 48 10 CAN Control unit for permanent illumination US-market only - not valid part #
I'm wondering if I am better off just buying the Illuminated star kit from eBay. Around $400.
I want it to be illuminated all the time. Any other suggestion without splitting wires?
Thanks in advance for the info.















