Dealer says fuel smell/leak... w205 2015 C300 base
anyone else with a w205 have this issue? anyone swap the parts themselves?
Last edited by killercut; Mar 1, 2019 at 11:55 AM.
The dealership is Mercedes of Danbury if anyone cares...
They were also very difficult to deal with when we brought the car in for a service bulletin almost 2 years ago for some internal part in the engine that was causing noises/clicking/ticking, and also for the driver and passenger window service bulletin. They flat out refused to service the car for the service bulletins, even though I had the service bulletin numbers. Ended up having to take the car to another dealer an hour away from home, who did service our car and managed to get our warranty extended since engine work was done.
Last edited by killercut; Mar 1, 2019 at 07:20 PM.
Trending Topics
The Best of Mercedes & AMG
The dealership is Mercedes of Danbury if anyone cares...
They were also very difficult to deal with when we brought the car in for a service bulletin almost 2 years ago for some internal part in the engine that was causing noises/clicking/ticking, and also for the driver and passenger window service bulletin. They flat out refused to service the car for the service bulletins, even though I had the service bulletin numbers. Ended up having to take the car to another dealer an hour away from home, who did service our car and managed to get our warranty extended since engine work was done.
The fuel lines are pressurized, so it might only leak when the pressure builds up. I kept getting a STRONG gas smell the garage after parking for long periods.
I eventually took pictures of the position and gas spill as proof (it will dry up quickly) and the dealer replaced the lines under warranty.
When you buy a CPO, it's best to pay very close attention to the vehicle for the first year.

Last edited by benzdude; Mar 5, 2019 at 02:22 PM.
Here is a pic from underneath that I took before I replaced mine:
They use this flexible hose to connect the engine-side rigid fuel lines to the car body-side rigid fuel lines. As the engine moves back and forth in normal operation, it puts force on these two clamped connections. Not a great design in this orientation and I can certainly see why so many have failed over the last 3 to 4 years!
Here is a pic from underneath that I took before I replaced mine:
They use this flexible hose to connect the engine-side rigid fuel lines to the car body-side rigid fuel lines. As the engine moves back and forth in normal operation, it puts force on these two clamped connections. Not a great design in this orientation and I can certainly see why so many have failed over the last 3 to 4 years!
I pulled the original clamps off by squeezing the clasp on the clamp (painted red on these) with a regular pair of slip-joint pliers while also prying the clasp open with a small flat blade screwdriver. There is also a silicone hood over the original clamp that I cut off as well. Once the old clamp was removed I replaced with new 5/8" stainless screw-type clamps like these:
Edited to add: My car is out of warranty so I do what I want

Last edited by diamondsilver16; Feb 14, 2020 at 05:47 PM.
I pulled the original clamps off by squeezing the clasp on the clamp (painted red on these) with a regular pair of slip-joint pliers while also prying the clasp open with a small flat blade screwdriver. There is also a silicone hood over the original clamp that I cut off as well. Once the old clamp was removed I replaced with new 5/8" stainless screw-type clamps like these: https://www.amazon.com/Glarks-14-16m...dp/B07VQ6SM2M/
Edited to add: My car is out of warranty so I do what I want

1. Crankcase breather hose
2. Fuel line repair
Apparently these jobs are SUPER expensive. Total estimate from dealer is $2000 ( $1500 + $500).
Here is where I need help from you all - I have seen on pelicanparts.com that breather hose can be done in 1 hr by a novice DIY person with almost basic tools.
What is your take on that ?









