Footwell woofers
Another question for these footwell speakers - is there a straightforward way to run a small subwoofer amp to these footwell speakers using the stock high level speaker outputs as the amp input signal, and then driving the woofers with the amplified output?
I am looking at doing a small upgrade to an E class and was thinking of Match DSP amp with the footwell speakers to start. But I'm unsure if it will make a big enough difference or not.
Another question for these footwell speakers - is there a straightforward way to run a small subwoofer amp to these footwell speakers using the stock high level speaker outputs as the amp input signal, and then driving the woofers with the amplified output?
I have the base audio 20 system and I have installed aliexpress speakers, tweeters, and footwell subs. I have not uprgrade the amp. I would almost say that the change in the bass from stock is wowing. The bass is very much feelable in the body rather than stock I would say the new hardware with the stock amp would for sure make a difference. As for your 2nd question I don't know. Hence why I haven't upgraded my amplifier. 2019 c300 4-matic.
Another question for these footwell speakers - is there a straightforward way to run a small subwoofer amp to these footwell speakers using the stock high level speaker outputs as the amp input signal, and then driving the woofers with the amplified output?
https://www.audiotec-fischer.de/en/match/speakers/
https://www.audiotec-fischer.de/en/match/speakers/
I use the Nav-TV Zen-M (MOST 150) to feed the V Twelve DSP amp via TOSLINK input. There are also similar DA-G2 devices from Mobridge that do the same. They have 3 types.
The new adapter harness is from Audiotec fisher and feeds the speakers from the DSP. That way you don't need to cut wires. You can also make your own harness.
Main (fused) power cable needs to be run from battery to the trunk to feed all devices.
Trending Topics
I use the Nav-TV Zen-M (MOST 150) to feed the V Twelve DSP amp via TOSLINK input. There are also similar DA-G2 devices from Mobridge that do the same. They have 3 types.
The new adapter harness is from Audiotec fisher and feeds the speakers from the DSP. That way you don't need to cut wires. You can also make your own harness.
Main (fused) power cable needs to be run from battery to the trunk to feed all devices.
Do you know if all this is needed as a plug and play option? It sounds like you utilized additional pieces in your system.
The Best of Mercedes & AMG
Do you know if all this is needed as a plug and play option? It sounds like you utilized additional pieces in your system.
You need:
- A DSP AMP
- A harness from Amp to Speakers
- A MOST 150 Module to flatten the signal and provide toslink output to Amp
My Match harness didn't have any connectors on it, just bare wires.
Search the forum, it's all there.
https://mbworld.org/forums/c-class-w...pic-heavy.html
https://mbworld.org/forums/c-class-w...placement.html
Last edited by benzdude; Apr 9, 2026 at 02:12 PM.










