5.5 AMG badge idea
Member
Joined: Nov 2006
Posts: 90
Likes: 0
From: New Jersey
Crossfire SRT-6
its a cultural thing.. they have been doing that for years..
the amg 63 is not a 6.3 the 55 is not a 5.5.. and the 65 is definatly not a 6.5
Regardless they make the 6.3 badges in that format and I see nothing wrong with making the 5.5 badge in that format.. good luck man and I hope it turns out good for you
the amg 63 is not a 6.3 the 55 is not a 5.5.. and the 65 is definatly not a 6.5
Regardless they make the 6.3 badges in that format and I see nothing wrong with making the 5.5 badge in that format.. good luck man and I hope it turns out good for you
Thread Starter
Super Member
Joined: May 2007
Posts: 697
Likes: 0
From: Austin, TX
2006 Mercedes C55 AMG
I had a request that we make 3.2 badges rather than the 5.5 however I think that the 5.5 badges would be more popular as there are more cars that share the 55 designation rather than the 32....
MBWorld Fanatic!
Joined: Jul 2003
Posts: 1,687
Likes: 28
From: Western Canada
2013 C63 AMG P31, 2014 GMC Sierra (6.2)
I'm sure it would sell...
Also, I just received some V8 emblems from a seller in Taiwan I am going to put on my C55. I wonder if I emailed him the picture from this thread of the 5.5AMG if they have the means to be able to create it. Thanks for resurrecting this thread...
Also, I just received some V8 emblems from a seller in Taiwan I am going to put on my C55. I wonder if I emailed him the picture from this thread of the 5.5AMG if they have the means to be able to create it. Thanks for resurrecting this thread...
Member
Joined: Apr 2008
Posts: 164
Likes: 0
C55 AMG
I am going to send one of these off to my guys in China via EMS on Friday. I will get a price and post it. I think we will need at least 10 sets to make this possible because there is a machine set-up fee. Who's in right now for the 5.5? I can also have a 3.2 made but again I will need at least 10 more to make it cost effective.
The more people we get in on this the cheaper they will be. I will see if they can make them as close if not exact to OEM specs.
The more people we get in on this the cheaper they will be. I will see if they can make them as close if not exact to OEM specs.
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Jun 2007
Posts: 2,208
Likes: 22
From: Westmont, IL
2014 C63 Sedan
Junior Member
Joined: Oct 2007
Posts: 63
Likes: 0
2006 W164 ML350
MBWorld Fanatic!
Joined: Feb 2006
Posts: 1,489
Likes: 110
From: WNY
2005 w203 C230
We can do this in America or any other location that has a CNC...The question is...how do you want it made? It can be a low run CNC operation in a metal (Aluminum) and then polished...it can be cut out of a plastic like ABS and then cleaned up...painted or "chromed"...or you can build a set of tools and mold them like the OEM units are, and chrome them...First you have to know what you want...
How would you attach this? 3M double sided tape? If so you may want a recess designed in the back side of the part to accept the thickness of the foam. CNC would require a flip operation...but again you are only paying for programming, set up and machined materials where the recess could be designed into the back side of a molded part - but then you have to pay for the tool the operation, the machine rate and the material...
Just some thoughts...
Jake
(Will it follow the curve of the fender - or be flat on the back / bottom?)
How would you attach this? 3M double sided tape? If so you may want a recess designed in the back side of the part to accept the thickness of the foam. CNC would require a flip operation...but again you are only paying for programming, set up and machined materials where the recess could be designed into the back side of a molded part - but then you have to pay for the tool the operation, the machine rate and the material...
Just some thoughts...
Jake
(Will it follow the curve of the fender - or be flat on the back / bottom?)
MBWorld Fanatic!
Joined: Apr 2003
Posts: 2,175
Likes: 0
From: Socal
EVE
Hm.. I might be able to do something completely flat and lasercut. Then I'll be able to image the necessary areas black over polished aluminum. Just a thought, but of course numbers and precise specifications will push this project through.
Edit:
The only fast example I have of what I can do for now is what I just accomplished with my flash bracket on my camera:
STOCK:
TEMPLATE CREATION (with polish):
AFTER:
Full color polished aluminum...probably more than what we'd want here, but hey, just throwing in my dayjob as help?
Edit:
The only fast example I have of what I can do for now is what I just accomplished with my flash bracket on my camera:
STOCK:
TEMPLATE CREATION (with polish):
AFTER:
Full color polished aluminum...probably more than what we'd want here, but hey, just throwing in my dayjob as help?
Last edited by mig888; Apr 16, 2008 at 01:02 PM.
Member
Joined: Apr 2008
Posts: 164
Likes: 0
C55 AMG
UPDATE:
I got my email back and assuming we want OEM quality these won't be cheap even if we get 10pcs ordered. It's looking about $35/emblem. That is if I send them an OEM one and they make it 2 tone just like the OEM badges are. Let me know and if we should go ahead with it.
I got my email back and assuming we want OEM quality these won't be cheap even if we get 10pcs ordered. It's looking about $35/emblem. That is if I send them an OEM one and they make it 2 tone just like the OEM badges are. Let me know and if we should go ahead with it.
MBWorld Fanatic!
Joined: Jul 2003
Posts: 1,687
Likes: 28
From: Western Canada
2013 C63 AMG P31, 2014 GMC Sierra (6.2)
UPDATE:
I got my email back and assuming we want OEM quality these won't be cheap even if we get 10pcs ordered. It's looking about $35/emblem. That is if I send them an OEM one and they make it 2 tone just like the OEM badges are. Let me know and if we should go ahead with it.
I got my email back and assuming we want OEM quality these won't be cheap even if we get 10pcs ordered. It's looking about $35/emblem. That is if I send them an OEM one and they make it 2 tone just like the OEM badges are. Let me know and if we should go ahead with it.
