Supercharger Bearing
#1
MBWorld Fanatic!
Thread Starter
Supercharger Bearing
Does anyone have access to a new C32 supercharger bearing? It would really help me out. I need one, but they seem to be back ordered at LET and Code3. I don't know where else to get one.
Any help would be great, thanks!
Any help would be great, thanks!
#2
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
here you go. http://www.houstonbearing.com/Defaul...arch%20results
It's air-condition bearing, but the same size. however it's not a bearing rated as fast as the OEM one code3 have access to.
The first one I replaced it with only lasted 6 month, but this second one I'm on already went past a year and half mark and still good. I keep a spare one on hand just in case. since they're not always available as well.
It's air-condition bearing, but the same size. however it's not a bearing rated as fast as the OEM one code3 have access to.
The first one I replaced it with only lasted 6 month, but this second one I'm on already went past a year and half mark and still good. I keep a spare one on hand just in case. since they're not always available as well.
Last edited by FrankW; 12-30-2008 at 01:56 AM.
#3
Super Member
The alternative (courtesy of TopGun32) is an air conditioning bearing from Houston Bearings: DAC32550023.
I have one sitting at home (DAC32550023) and you are most welcome to it - I can ship it out to you tomorrow if you are in dire need of a replacement (albeit probably temporary!). Send me a PM and let me know.
#4
MBWorld Fanatic!
Thread Starter
I agree with Frank - if you want the best solution, you should go with NSK 32BD45DU. That one seems to be difficult to source - obviously that's why you're posting!
The alternative (courtesy of TopGun32) is an air conditioning bearing from Houston Bearings: DAC32550023.
I have one sitting at home (DAC32550023) and you are most welcome to it - I can ship it out to you tomorrow if you are in dire need of a replacement (albeit probably temporary!). Send me a PM and let me know.
The alternative (courtesy of TopGun32) is an air conditioning bearing from Houston Bearings: DAC32550023.
I have one sitting at home (DAC32550023) and you are most welcome to it - I can ship it out to you tomorrow if you are in dire need of a replacement (albeit probably temporary!). Send me a PM and let me know.
#6
Member
Join Date: Aug 2002
Location: Fairfax, VA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
2002 C32 AMG Orion Blue Charcoal/Blue
Supercharger Bearing Fix Options
Can anyone clue me in to the alternatives to fix a bad bearing on the supercharger? My has been rattling for a while and I have an independent looking at it now. They referenced a kit from the dealer for $1,100 or so and quite a bit of labor time.
Can anyone bring me up to date on how to address this problem?
Can anyone bring me up to date on how to address this problem?
Last edited by Carl AMG; 07-27-2009 at 11:40 AM.
#7
Super Member
Join Date: Jul 2006
Location: FT POLK LOUISIANA
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
1992 Toyota Corolla, 1994 Chevy C1500, 2002 C32, 2012 Prius, 2013 Toyota Sienna
I agree with Frank - if you want the best solution, you should go with NSK 32BD45DU. That one seems to be difficult to source - obviously that's why you're posting!
The alternative (courtesy of TopGun32) is an air conditioning bearing from Houston Bearings: DAC32550023.
I have one sitting at home (DAC32550023) and you are most welcome to it - I can ship it out to you tomorrow if you are in dire need of a replacement (albeit probably temporary!). Send me a PM and let me know.
The alternative (courtesy of TopGun32) is an air conditioning bearing from Houston Bearings: DAC32550023.
I have one sitting at home (DAC32550023) and you are most welcome to it - I can ship it out to you tomorrow if you are in dire need of a replacement (albeit probably temporary!). Send me a PM and let me know.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Trending Topics
#8
Senior Member
Join Date: Dec 2008
Location: Taipei, Taiwan
Posts: 343
Likes: 0
Received 3 Likes
on
3 Posts
C32 '02
i got one extra NSK bearing (OEM bearings)actually have two but keeping one for backup. I'll sell it for 10 bucks plus shipping. I can get them locally at dirt cheap prices. Let me know if anyone needs them. Any good shop with a press can do it within 1 hour. I had my mechanic do it for free since I was replacing an idler bearing. It turned out that the idler bearing was faulty to begin with, but I did a preventative change @60K not wanting to know when the SC bearing will die on me.
cheers~
cheers~
Last edited by ML500K; 07-27-2009 at 10:56 PM.
#10
Senior Member
Join Date: May 2009
Location: Las Vegas, Nevada
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
03 C32 AMG
#12
Member
Join Date: Aug 2002
Location: Fairfax, VA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
2002 C32 AMG Orion Blue Charcoal/Blue
i got one extra NSK bearing (OEM bearings)actually have two but keeping one for backup. I'll sell it for 10 bucks plus shipping. I can get them locally at dirt cheap prices. Let me know if anyone needs them. Any good shop with a press can do it within 1 hour. I had my mechanic do it for free since I was replacing an idler bearing. It turned out that the idler bearing was faulty to begin with, but I did a preventative change @60K not wanting to know when the SC bearing will die on me.
cheers~
cheers~
Thanks!
#15
MBWorld Fanatic!
Join Date: Aug 2005
Location: Southern Cali (Ontario)
Posts: 3,466
Likes: 0
Received 10 Likes
on
10 Posts
if you really need one.. go with the houston bearings.
But if you can get a used code3 pulley, it has the same bearing from NGK and you get more power at the same time and just as easy to install as the bearing.
Any mechanic with some sort of self initiative will figure out the bearing install. I used to take both cars to a ghetto shop here in Ontario, and they were able to install just about anything I can throw at the them. crank Pullies, IC pump, H/E, plugs, trans flush, engine oil change, brakes, bearings, water pump cover for the c32, ect..
But the owner passed away and changed ownership. Now one of their former mechanics, comes to my garage when ever I need him and I pay him cash.
But if you can get a used code3 pulley, it has the same bearing from NGK and you get more power at the same time and just as easy to install as the bearing.
Any mechanic with some sort of self initiative will figure out the bearing install. I used to take both cars to a ghetto shop here in Ontario, and they were able to install just about anything I can throw at the them. crank Pullies, IC pump, H/E, plugs, trans flush, engine oil change, brakes, bearings, water pump cover for the c32, ect..
But the owner passed away and changed ownership. Now one of their former mechanics, comes to my garage when ever I need him and I pay him cash.
#16
Junior Member
Join Date: Jun 2007
Location: Raleigh
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
2003 C32 (NW, LET, etc)
#17
#18
#19
#20
MBWorld Fanatic!
Join Date: Sep 2008
Location: murfreesboro,tn
Posts: 3,152
Likes: 0
Received 0 Likes
on
0 Posts
2003 porsche 996 turbo
heres were to get the c3 bearing. mine was 56$ and shipped in about 4 days
http://www.hpashop.com/category.sc?categoryId=58
the replacement bearing appears to be the same as the c3 bearing. same color anyway. my c3 is installed so i cant say for sure
http://www.hpashop.com/category.sc?categoryId=58
the replacement bearing appears to be the same as the c3 bearing. same color anyway. my c3 is installed so i cant say for sure
Last edited by 320 dreamer; 09-15-2009 at 07:28 PM.
#21
Member
Join Date: Aug 2002
Location: Fairfax, VA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
2002 C32 AMG Orion Blue Charcoal/Blue
heres were to get the c3 bearing. mine was 56$ and shipped in about 4 days
http://www.hpashop.com/category.sc?categoryId=58
the replacement bearing appears to be the same as the c3 bearing. same color anyway. my c3 is installed so i cant say for sure
http://www.hpashop.com/category.sc?categoryId=58
the replacement bearing appears to be the same as the c3 bearing. same color anyway. my c3 is installed so i cant say for sure
#23
MBWorld Fanatic!
Join Date: Sep 2008
Location: murfreesboro,tn
Posts: 3,152
Likes: 0
Received 0 Likes
on
0 Posts
2003 porsche 996 turbo
#24
Super Member
Join Date: Aug 2006
Location: san jose, ca
Posts: 510
Likes: 0
Received 3 Likes
on
3 Posts
2002 C32 1987 190E 2.3 334K miles and going
Nachi Bearings
i got mine from these guys.
http://bearingsdirect.com/store/inde..._detail&p=3460
sometimes it's not the bearing but the plate that's making
some noise. mine has a slight wobble. I ordered some shims
and will install this weekend.
http://bearingsdirect.com/store/inde..._detail&p=3460
sometimes it's not the bearing but the plate that's making
some noise. mine has a slight wobble. I ordered some shims
and will install this weekend.