Dyno # for Evosports ODPS 19"
#1
Almost a Member!
Thread Starter
Join Date: Feb 2002
Location: Irvine, CA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes C32
Dyno # for Evosports ODPS 19"
Here is a dyno I did recently after I installed the Evosports ODPS.
My car is wearling 19" BBS LM. At the time of the dyno, they didn't use the fan blowing at my car.
I am confident if I had the fan and the stock 17" wheels I am sure I can achieve at least 312 rwh.
Dyno result
http://www.fototime.com/{E9AC36F6-7B...2}/picture.JPG
My car is wearling 19" BBS LM. At the time of the dyno, they didn't use the fan blowing at my car.
I am confident if I had the fan and the stock 17" wheels I am sure I can achieve at least 312 rwh.
Dyno result
http://www.fototime.com/{E9AC36F6-7B...2}/picture.JPG
Last edited by amgc32; 01-29-2003 at 11:32 PM.
#4
Member
Join Date: Sep 2002
Location: VA
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
2002 SLK 32 AMG
so you gained about 30rwhp ???
also does anybody have a pic of what the evosport odps pulley looks like compared to the stock pulley ? i'm also looking into geting either a renntech or a evosport pulley but not use yet. thanks for the help
#7
Member
Join Date: Sep 2002
Location: Diamond Bar, CA.
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
2005 B6 S4
Originally posted by On Pole
I got 310.3 HP and 322.3 TQ with the Renntech Pulley kit. I also have 19" wheels.
I got 310.3 HP and 322.3 TQ with the Renntech Pulley kit. I also have 19" wheels.
Did Renntech tell you how much HP the ECU alone will give you?
peter
Trending Topics
#9
MBWorld Fanatic!
Join Date: Mar 2002
Location: Kenilworth, il usa
Posts: 2,924
Received 378 Likes
on
244 Posts
'22 Alpina B7,'21 G63 Renntech obviously (wife), Wrangler(kids)
Seems Amgc32 had a loss to r wheels about 23% if his car in stock had 349hp,so that kind of loss would mean that On Pole has a car with 400hp at the crank!Congrats On Pole!!!!
#10
Almost a Member!
Join Date: Feb 2003
Location: Clarksville, MD
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
MB C32 AMG
Thanks, I have been taking alot of heat from my friends about this kit. They feel that $3500 is too much money for the gain in power. I feel that the kit is worth every cent.
#11
MBWorld Fanatic!
Don't feel bad On Pole, those numbers are o.k.. The 322 LB/FT shows you definitely got your moneys worth in torque. And the horsepower has been low for all C32's on the Dyno. The intercooler gets heat soaked before the car gets to redline and the power is dropping off in 3rd and 4th gear. In real world driving we have 80 + mph wind hitting the intercooler radiator which prevents the power loss.
Just enjoy the new power.
Just enjoy the new power.
#12
Senior Member
Join Date: Nov 2002
Location: Banana Republic of Louisiana
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
2002 E55K RENNtech HP
Dyno results
I witnessed RENNtech's dyno of My401's C32 before and after mods. Made video which shows speedo at 105MPH in 3rd gear. Hartmut was overseeing the entire operation and was pleased with the results as we were. I also drove the car before and after and can definitely feel the improvement. My calculation of crank horsepower using 20 percent drivetrain loss was 396.3 HP and 416.6 lb/ft torque. Had a lot of fun, be happy.