Ghostrider@P1 Performance

Here we go!!! Attached you will find a picture of the new end and a picture of the complete kit with the old ends.

Kit Price: $180 shipped to the lower 48 states.

Includes:

(2) Aluminum Hex Rods
(4) Squeak Free (SqF) Ends
(4) Lock Nuts

The SqF Ends can be sold separately for those that have other kits.

W201 Chassis
190E 2.3 2.6 190D 2.2 2.5 Turbo 16V 84-93

W124 Chassis
300E/CE/TE 260E 300D 300D-Trb 300TD & Turbo 400E 500E E420 E500 E320 86-95 Sedan Coupe Cabriolet Wagon & 4-Mtcs

W202 Chassis
C220 C230 C280 C36 AMG C43 AMG 94-02

W203 Chassis
C230K C240 C32 AMG C55 AMG 03-06

W129 Chassis
300SL 500SL 600SL SL320 SL500 SL600 Convertible 90-02

W208 Chassis
CLK320 CLK430 CLK55 AMG 98-03 Coupe and Cabriolet

W210 Chassis
E320 E420 E430 E55 AMG 98-02 Sedan and Wagon

W209 Chassis
CLK320 CLK500 CLK55 AMG 03-05 Coupe Cabriolet

R170 Chassis
SLK230 SLK320 SLK32 AMG

Please let me know if you are interested in a kit or just the ends:

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

320 dreamer

im going to link this on the crossfire forum. bunch of folks there looking for camber kits

TruTaing

How are the ends squeak free?

Ghostrider@P1 Performance

Wow, thanks!!! Let them know the will get the same price as posted.

Ghostrider@P1 Performance

Before, the injection molded teflon race would wear away and that's what would cause the squeak. Now, we have steel body with polyurethane bushings, so there is nothing to wear away.

Ghostrider@P1 Performance

Here is what the complete kit looks like now:

Ghostrider@P1 Performance

https://mbworld.org/forums/c-class-w...-thread-6.html

Ghostrider@P1 Performance

https://mbworld.org/forums/c-class-w...amber-kit.html

Ghostrider@P1 Performance

Kits are still available at the new low Group Buy price of $170!!

Ghostrider@P1 Performance

I have a couple of early design kits that I letting go cheap. PM me for details.

-Ghost

mkonei

Have these ready to ship? PM me a price on the original kit style too. I dont put that many miles on the car any longer, how long do the joints last before they become noisy/sloppy?

MBfinatic

how much do these help?

Ghostrider@P1 Performance

If you are lowered, they help a lot!!! Your rear tires will wear as if the suspension were stock.

Ghostrider@P1 Performance

New kits are now available and ready to ship!!

-Ghost

mkonei

Free bump for you....thanks for the quick ship. Theyre going on today.

Ghostrider@P1 Performance

Awesome!! Remember to have them adjust the holes to 12" on center before they install them.

JUAN CASAUS

Do You need to have a shop install them? Do you have to do an alignment?

Ghostrider@P1 Performance

Check my #8 post for the DIY instructions. You may want to have it check, but they may not need to adjust anything.

mkonei

Took me about an hour, pretty simple. Installing at 12" didnt work for me. I put them in as short as possible, and then turned them out to 12" oc. I need to come back in a little bit though, as they are out further at the top than I would like. With steel ends and an aluminum body, dont forget the anti seize!

Ghostrider@P1 Performance

Good advice onei!! The 12" is more for alignment purposes, the kit can be adjusted to anyone's individual liking as far as looks go.

Ghostrider@P1 Performance

I still have a few kits available from the most recent production run. PM me for details.

-Ghost

goodgenes79

Received my kit, but haven't installed yet. I was curious what aluminum alloy was used for the shafts?

Ghostrider@P1 Performance

6061

Ghostrider@P1 Performance

I still have one (1) kit left!!! Need to get rid of it before I start the next production run.

C55inTO

do you still have any kits available? PM me