Suspension for C43




Attachment 200661
and I like the square part in the middle to put your spanner when adjusting Here is a pic of the MB Arts rear adjustable camber arm:
Attachment 200661
do they feel solid?
I red sellers information on his ebay auction, it says these camber arms are not for street use and might be illegal if used on the car?
I don't get it?
These rods aren't they approved for street use?
I have copied the text.
Product use
These camber arms are intended for off-road use only and might not be legal for street use. It is your responsibility to determine the applicability of local, state, and federal laws and your compliance with those laws prior to using the camber arms on any vehicle that is driven on the street.

do they feel solid?
I red sellers information on his ebay auction, it says these camber arms are not for street use and might be illegal if used on the car?
I don't get it?
These rods aren't they approved for street use?
I have copied the text.
Product use
These camber arms are intended for off-road use only and might not be legal for street use. It is your responsibility to determine the applicability of local, state, and federal laws and your compliance with those laws prior to using the camber arms on any vehicle that is driven on the street.
I ask if they are legal because of government vehicle inspections!
Every year I have to take my car to this test facility and they are going to give my car a pass for another trouble free year driving on the streets or bust me and say FIX it, or you're in trouble and the car gets a BAN slip forbidden to drive!
We don't want that!
If they say NAY camber arms are illegal, if they say JAY then alles gut, rite?
About the weight, I'm asking because they are made of aluminium.
And alu. is light, it needs a certain strenght not to break!




I have the same problem, but the test here is every 2 years for cars of that age. I will try and get my 43 through the next time (April or May 2012) with the "drumsticks" and as I'm nice and specially for you (and others of course) I will weight the Speedybenz arms tonight.
The results of course will be in kilograms, but you are all old enough to be able convert to your weird non decimal weights
I have the same problem, but the test here is every 2 years for cars of that age. I will try and get my 43 through the next time (April or May 2012) with the "drumsticks" and as I'm nice and specially for you (and others of course) I will weight the Speedybenz arms tonight.
The results of course will be in kilograms, but you are all old enough to be able convert to your weird non decimal weights 
We also use the (KG) kilograms.
1000g is 1kg = jayyyyyyyyy.

vehicle inspection every 2nd year, fooooooook me that's awesome not having to be robbed for your hard earned cash every year like I am being ripped off by the government every year!
I thought you had your camber arms installed already?
The only inspections would be for cars coming from outside the province, or if one is switching insurers and you have an older car, the insurer may require a cursory inspection.
The Best of Mercedes & AMG












I will weigh the standard MB arm when I remove one to compare, but that will be later when it gets warmer...
1 drumstick is less than 1000gram thats great.









I have acquired all of my parts needed for my suspension except spring pads but the local MB dealership is just 5 minutes away from me so that won't be an issue. Here are pics of what I am installing:




I am just waiting for a weekend where I don't work and it doesn't rain (seeing how I work ALL the time as well as it rains ALL the time it might be a while
)One question I have is should I get an alignment right away or wait a week or two for the suspension to settle. I have read a lot about this and it seems there is conflicting info out there, I figured I would ask here as I trust you guys more than any other forum out there.
I will keep you guys posted as well as post before and after pics.
Last edited by 503C43 ////AMG; Jan 23, 2011 at 06:07 PM.




I have acquired all of my parts needed for my suspension except spring pads but the local MB dealership is just 5 minutes away from me so that won't be an issue. Here are pics of what I am installing:
Attachment 201034
Attachment 201035
Attachment 201036
Attachment 201037
I am just waiting for a weekend where I don't work and it doesn't rain (seeing how I work ALL the time as well as it rains ALL the time it might be a while
)One question I have is should I get an alignment right away or wait a week or two for the suspension to settle. I have read a lot about this and it seems there is conflicting info out there, I figured I would ask here as I trust you guys more than any other forum out there.
I will keep you guys posted as well as post before and after pics.
I intalled KW V2s about a month ago and the kit is little on the soft side for my taste, and the rear spring hat/cup needed to be cut to make the rear height adjustable....which I didn't. I'm lucked out, because I'mjust using #4 pads on the rear and the height is perfect.I just didn't expect cutting crap out of the car from $1850 kit.... KW makes nice product but I guess W202 were a little neglected...




I intalled KW V2s about a month ago and the kit is little on the soft side for my taste, and the rear spring hat/cup needed to be cut to make the rear height adjustable....which I didn't. I'm lucked out, because I'mjust using #4 pads on the rear and the height is perfect.I just didn't expect cutting crap out of the car from $1850 kit.... KW makes nice product but I guess W202 were a little neglected...

Keep in mind I already have new springs, shocks, rear adjustable camber arms, spring pads, and the front K-MAC camber/castor kit.
Keep in mind I already have new springs, shocks, rear adjustable camber arms, spring pads, and the front K-MAC camber/castor kit.
http://cgi.ebay.com/ebaymotors/MERCE...Q5fAccessories
and the bottom solid arms if you wanna go stiff again.
http://www.autohausaz.com/search/ima...2023500206.jpg
I found front KMAC kit to be sold on Flebay @ $359 dollars.
Is it chepaer to buy them from Ebay or directly from Kmac?
Last edited by KJI3jflarryfe93; Feb 5, 2011 at 01:38 PM.

http://cgi.ebay.com/ebaymotors/MERCE...Q5fAccessories
and the bottom solid arms if you wanna go stiff again.
http://www.autohausaz.com/search/ima...2023500206.jpg
I found front KMAC kit to be sold on Flebay @ $359 dollars.
Is it chepaer to buy them from Ebay or directly from Kmac?





