Open pore dark ash wood
#1
Senior Member
Thread Starter
![Question](https://mbworld.org/forums/images/icons/icon5.gif)
Does anyone know if this trim item still "on constraint"? and or when it might become available?
#2
Senior Member
Join Date: Aug 2016
Location: Great White North
Posts: 274
Likes: 0
Received 37 Likes
on
29 Posts
Polar White C43 Sedan
They dealership should be able to tell you. When I was inquiring about it they went on their ordering system and it was on constraint just a while back with no ETA for availability.
I did read a post around here (it was on the internet so it must be true
) that it might be on constraint for a while (feb or something if I remember correctly)
I did read a post around here (it was on the internet so it must be true
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#4
Senior Member
Join Date: Aug 2016
Location: Great White North
Posts: 274
Likes: 0
Received 37 Likes
on
29 Posts
Polar White C43 Sedan
I'd go inventory shopping if you're looking for Open Pore wood. I know when I was looking I found a number with it sitting on lots in the GTA. I wanted the open pore but then found my car with a HUD (which I wanted) with the carbon fibre so I compromised.
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
#5
Senior Member
Thread Starter
I've reached out to my dealership and they are supposed to check and get back tomorrow.
I'd rather not compromise if possible but if my build is available on a lot that would be fine. Guess we'll cross that bridge on Feb. 1.
I have a clause on my sales contract whereby if my car does not arrive as ordered the dealership agrees to furnish a "comparable vehicle" until it does.
I'd rather not compromise if possible but if my build is available on a lot that would be fine. Guess we'll cross that bridge on Feb. 1.
I have a clause on my sales contract whereby if my car does not arrive as ordered the dealership agrees to furnish a "comparable vehicle" until it does.
#6
Member
Still unavailable on mine, dealer is checking once a week up until my lock-in date mid to late December ( for a scheduled build first 10 days of February ). If it is not available come my lock-in date I am going to have to go for either the stock black lacquer or the carbon fibre; I am not willing to wait for an unspecified amount of time, want the car for spring/summer as I live in a climate where it rains from November till April
#7
Member
I hope it will be available for my build (C43, 1-10 dec)... I would hate to have that brown shiny wood on my car, or the piano black (don't even know if it's available for the C43)
.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Trending Topics
#9
Senior Member
Thread Starter
#10
Senior Member
Thread Starter