MHP reflash v2 review, test and dyno pulls
#1
MHP reflash v2 review, test and dyno pulls
Hello Everyone!
Just wanted to mention I have EURO spec C63 with full performance package. I reflashed my ECU with MHP v2 reflash and trans also while I was at SEMA show. I got back and installed the ECU into the car and drove it for 150-200 miles and went to test it on the dyno today. Need to mention that I still have not installed the thermal gaskets and intakes that was included with the kit. so I will pick up some HP from those also I guess.
The results was as promissed. I got 433.6 WHP and the flywheel calculated hp is 529.2 and torque is almost 700 Nm. This was mesured on probably a best dynodynamics dyno.
Here are the graphs:
and here is the comparison before and after the reflash:
WHP comparison:
CRANK hp comparison:
and here is the VIDEO of the dyno pulls:
http://www.youtube.com/watch?v=0bOgRm7vwJY
Here it is. I am very happy with the numbers. I have not driven the car a lot yet but the throttle seems be much better and shifting also. The only issue I had is for some reason it seems that Andy forgot to delete me the speed limiter. I tried running the car above 250 kph but it was like a limiter still there. Andy can you please check my file and make sure it is deleted?
So the review he here. I am very happy with what I got now and in spring I will get some 1/4 mile results for you.
Here are more pictures and more graphs. please folow this link: http://www.topspeed.com.ua/gallery/t...s.php?album=41
Just wanted to mention I have EURO spec C63 with full performance package. I reflashed my ECU with MHP v2 reflash and trans also while I was at SEMA show. I got back and installed the ECU into the car and drove it for 150-200 miles and went to test it on the dyno today. Need to mention that I still have not installed the thermal gaskets and intakes that was included with the kit. so I will pick up some HP from those also I guess.
The results was as promissed. I got 433.6 WHP and the flywheel calculated hp is 529.2 and torque is almost 700 Nm. This was mesured on probably a best dynodynamics dyno.
Here are the graphs:
and here is the comparison before and after the reflash:
WHP comparison:
CRANK hp comparison:
and here is the VIDEO of the dyno pulls:
http://www.youtube.com/watch?v=0bOgRm7vwJY
Here it is. I am very happy with the numbers. I have not driven the car a lot yet but the throttle seems be much better and shifting also. The only issue I had is for some reason it seems that Andy forgot to delete me the speed limiter. I tried running the car above 250 kph but it was like a limiter still there. Andy can you please check my file and make sure it is deleted?
So the review he here. I am very happy with what I got now and in spring I will get some 1/4 mile results for you.
Here are more pictures and more graphs. please folow this link: http://www.topspeed.com.ua/gallery/t...s.php?album=41
Last edited by c63ukraine; 11-16-2008 at 02:49 PM.
#2
MBWorld Fanatic!
Join Date: Jul 2004
Location: 43°38'N / 79°52'W
Posts: 1,743
Likes: 0
Received 0 Likes
on
0 Posts
EuroCharged 2012 C63 BS Coupè
Something isn't right with the Speed Limiter. With a Full P30 Package the limit should be raised to 175Mph or 280Kph...no??
#5
Andrey, thanks for taking the time to do such comprehensive testing. Your speed limiter was raised to over 185mph, so it's weird that you're hitting a limiter. Let me check into it more on Monday for you.
Thanks again!
Thanks again!
#7
Hello Andy.
The peak torque was 700 Nm which is I believe 516 ft-lbs
Is it seams right?
Please take a look at speed limiter. it is not much space here to check it but I will try once again later.
The peak torque was 700 Nm which is I believe 516 ft-lbs
Is it seams right?
Please take a look at speed limiter. it is not much space here to check it but I will try once again later.
Trending Topics
#8
516lb/ft x .825 (17.5% DT loss) = 426rwtq, thanks!
#14
Hello. Yes it supposed to be CF5 I ordered 7 month ago, but I got them with metal centers and now waiting 7 monthes to get my carbon centers and have no idea how much more i will wait...
#16
MBWorld Fanatic!
the cheerleader is upset because once again he can't read and has to argue his agenda rather than what was posted? i'm not sure why my belief that dyno dynamics machines are the way to go if you're going to use dynos has you name calling...
hey andy, swat your lapdog for me and tell him to get a clue before yapping...or maybe i can hire your attorney to sue him too?
bye
#17
i'd love to have your ethug internet toughguy talk drag me into another one of your rah rah rants but andy is threatening legal action against me if point out the obvious anymore.
the cheerleader is upset because once again he can't read and has to argue his agenda rather than what was posted? i'm not sure why my belief that dyno dynamics machines are the way to go if you're going to use dynos has you name calling...
hey andy, swat your lapdog for me and tell him to get a clue before yapping...or maybe i can hire your attorney to sue him too?
bye
the cheerleader is upset because once again he can't read and has to argue his agenda rather than what was posted? i'm not sure why my belief that dyno dynamics machines are the way to go if you're going to use dynos has you name calling...
hey andy, swat your lapdog for me and tell him to get a clue before yapping...or maybe i can hire your attorney to sue him too?
bye
Libel is not synonymous with "pointing out the obvious", I'll leave it at that. Get a life mikey.
#18
MBWorld Fanatic!
besides, your little yes man dragged me into it. if you want me to stay clear more often, then tell your little b*tch to leave me out of it. deal?
#19
Stick to what you know, which obviously isn't cars. I'm sure we'd (as in everyone viewing this thread) all appreciate you staying out of it.
Thanks
#20
Banned
Join Date: Aug 2007
Posts: 2,735
Likes: 0
Received 1 Like
on
1 Post
CLK 63 Black Series, 2009 S550, 2011 Range Rover Supercharged, BMW F800 GS Anniv Edition
LOL - sounds to me like your mouth is writing checks your butt can't afford. I dragged you into it, huh ?? Sorry, but it's not my fault you can't argue your point without getting yourself into a litigious situation. Perhaps you should learn to keep your trap shut before you wind up paying a lawyer to do it for you.
Last edited by LZH; 11-16-2008 at 07:05 PM.
#21
MBWorld Fanatic!
i've pm'd him many times to ask him to pm me if he has anything to say but he seems to need the public attention...and now your posts are going to suffer for it. he only listens to you so this should be real easy for you. YOU ask him to leave me out of it if you want it to stop.
#22
MBWorld Fanatic!
i'm sure andy appreciates that!
don't worry, my attorney would laugh and wouldn't even take any money for this. i'm bored with football for today and i've got an hour before heading out to dinner, so i can keep posting for a while if you and andy like.
LOL - sounds to me like your mouth is writing checks your butt can't afford. I dragged you into it, huh ?? Sorry, but it's not my fault you can't argue your point without getting yourself into a litigious situation. Perhaps you should learn to keep your trap shut before you wind up paying a lawyer to do it for you.
#23
Banned
Join Date: Aug 2007
Posts: 2,735
Likes: 0
Received 1 Like
on
1 Post
CLK 63 Black Series, 2009 S550, 2011 Range Rover Supercharged, BMW F800 GS Anniv Edition
The single PM I received from you said nothing about communicating privately. If you didn't sound like such a broken record all the time, you wouldn't be so much fun to play with, Mikey.
#24
Member
Join Date: Aug 2008
Location: Vancouver, BC
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
997.2 Turbo
Thanks!
#25
MBWorld Fanatic!
btw, i've privately asked you on at least two occasions to take the off topic insults to pm and also offered to tell you how to find me when you insinuated the threats of violence. this is not to mention the several posted attempts i've made asking you to pm me with your banter so that others could keep conversations on topic.
so whenever you're ready to move on just let me know...