tire camber
Thread Starter
Super Member
Joined: Aug 2009
Posts: 533
Likes: 0
From: prattville alabama
C63
tire camber
My tire service manager told me my tires (rears} would last a lot longer if i had about 1/2 of the negative camber taken our at the dealer. what do up guys think?
Super Member
Joined: Oct 2008
Posts: 861
Likes: 3
From: Fairfield county, CT.
2004 Ran SRT-10,2007 S550,2016 E400c
Even if it did going more pos on the camber would help if you were wearing the inside edges on the tires.. and we all no c63 dont have that problem they wear very even on the rears... and with a heavy foot they wear FAST. Also if you pulled the camber in that much it would handle terriable in the rear
MBWorld Fanatic!
Joined: Oct 2008
Posts: 1,204
Likes: 1
From: Palos Verdes
'09 C63
Even if it did going more pos on the camber would help if you were wearing the inside edges on the tires.. and we all no c63 dont have that problem they wear very even on the rears... and with a heavy foot they wear FAST. Also if you pulled the camber in that much it would handle terriable in the rear
Trending Topics
Super Member
Joined: Dec 2009
Posts: 594
Likes: 2
From: CA
no more AMG
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Jul 2004
Posts: 1,743
Likes: 0
From: 43°38'N / 79°52'W
EuroCharged 2012 C63 BS Coupè
I just had a 4 wheel alignment done at my dealer and they pushed the Camber on all 4 corners to -1.9 (P30) using a different Camber Bolt. I may have the part # for the new bolts in my garage. will check when I get home later
MBWorld Fanatic!
Joined: Jul 2004
Posts: 1,743
Likes: 0
From: 43°38'N / 79°52'W
EuroCharged 2012 C63 BS Coupè
Sorry. the #'s above are for Calliper Bolts. The Correct Camber Bolt Part # is 000-333-09-71. (Single bolt) Set of 2 needed. $59.30 for the set here in Toronto
Last edited by NORTH 44 C63; Mar 19, 2010 at 10:24 PM. Reason: Incorrect Part # Supplied
MBWorld Fanatic!
Joined: Jul 2004
Posts: 1,743
Likes: 0
From: 43°38'N / 79°52'W
EuroCharged 2012 C63 BS Coupè
Hold off on ordering and of these until I verify the part #s tomorrowor Monday. There were a few bags with part #'s that my Shop Foreman left for me and I want to make sure I am giving you the correct #'s. Something tells me I may be off.
UPDATE:
Sorry. the #'s above are for Calliper Bolts. The Correct Camber Bolt Part # is 000-333-09-71. (Single bolt) Set of 2 needed. $59.30 for the set here in Toronto
Last edited by NORTH 44 C63; Mar 19, 2010 at 10:25 PM. Reason: Incorrect Part # Supplied
