broken center vent controls
the little slider feels kind of loose and a small little piece was loose and fell behind the vent and I got it out with some tweezers.
Anyone deal with this or know if its an easy fix or does the entire vent have to be replaced (which seems to be both vents as a whole unit)
https://www.parts.com/index.cfm?fuse...3-%20Liter-GAS
what years your car. this is for 08-11
Last edited by mthis; May 31, 2015 at 08:38 PM.
https://www.parts.com/index.cfm?fuse...3-%20Liter-GAS
what years your car. this is for 08-11
i found the same diagram on OE parts and it seems like youve got to replace the entire center portion not just one vent, is that right?
It was a simple fix. I managed to pull out just the vent assembly by gently levering it at the edges and pulling the whole vent assembly from the front.
The little piece you have already fished out will be designed to clip into the control knob from behind the central horizontal louvre. There will be 2 little prongs or similar that angle backwards to clip onto the vertical louvre that controls sideways airflow.
Use one of those plastic trim removal tools to pry it from the edges, and from memory I hooked something behind the centre bit to help pull it forwards.
Hope this makes sense.
Last edited by JimmyR; Jun 1, 2015 at 06:47 AM.
i noticed it as i was leaving the dealership hah!
odd thing is before i bought it the used car place replaced a vent too.
now i just have to get it re-tuned, cant get the mygenius unit to reset it's stuck in write mode so now we have to wait for this italian holiday to end.
It was a simple fix. I managed to pull out just the vent assembly by gently levering it at the edges and pulling the whole vent assembly from the front.
The little piece you have already fished out will be designed to clip into the control knob from behind the central horizontal louvre. There will be 2 little prongs or similar that angle backwards to clip onto the vertical louvre that controls sideways airflow.
Use one of those plastic trim removal tools to pry it from the edges, and from memory I hooked something behind the centre bit to help pull it forwards.
Hope this makes sense.
i'm betting it can be popped back without replacing the entire thing.
Trending Topics
The Best of Mercedes & AMG






