Bumper got hit.....Options?
So my bumper got quite a love tap the other day (came back to find it hit, sucks).
The bumper was actually pushed in, like a big dent, but amazingly next day (heat of the sun), popped out. So I am left with minor scuffing/scratches.
Its not horrible to look at, but like many in here, I know its there and when I look at it, it bothers me.
Body shop said they can repair it for like $500 but it won't be perfect. Only perfect way would be by buying a new bumper and painting.
This gets me to wondering, are there any other bumper designs that I can consider?
I have a 2012 Sedan.
And the damage after it popped out. (It looks a little cleaner now after I clayed/polished/waxed it as best as I could, but relatively the same) Diffuser has a small white scuff on it too.
I wouldn't be able to leave it like that. I would get a new bumper, or see if the panel shop could body fill the dent and respray.
Trending Topics
The Best of Mercedes & AMG
Not worth having a hit on my insurance/carfax in my opinion for $400 difference.
Would the BS style bumper fit directly? Might get me on the road to converting....




EDIT: something like this: http://www.ebay.com/itm/2008-2011-Me...VV8by2&vxp=mtr
Last edited by BLKROKT; Apr 6, 2016 at 03:14 PM.
EDIT: something like this: http://www.ebay.com/itm/2008-2011-Me...VV8by2&vxp=mtr
Thoughts on the looks fellas?




Even my HMS fenders, which are about as good as it gets in terms of finish, took a lot of work to get perfect. Primer -> guidecoat -> sand -> more primer -> final guide coat -> base coat -> and on and on.... not to mentioned the trimming and reforming to make them fit.
If it were me, I'd have a body shop fill it with filler, perfectly smooth it with guide coat, and repaint the entire thing if the cost was reasonable. Remember though, there's probably damage inside that you can't see either.
Most shops that are willing to can perfect that without a doubt. At $500, I just don't think there's much room for them to spend the labor hours to do it. I think a fair price for them to perfect that is roughly $700 to $800.
. Check my sig!too bad I already sanded it as it was saphir grey and I intended to paint it white and install it on my 09 sedan. It comes with difuser as well. Pm me if you are interested.
A good shop should be able to make it look like new based on what I see in the pictures. Just make sure they repaint the entire bumper which they most likely will.
Unfortunately if I decide to repair the bumper, the LSD gets put on hold again.
Appreciate everyone's input and I will update what happens!
ABcut it was Sapphire Grey!!?!??!?! PM heading your way.
Does anyone know if the PFL and FL bumpers are the same? Somehow I'm betting they arent....
color match (should) remain the same. why? because the area to be repaired is directly in the rear, so there is no need to apply color to the left and right corners of the bumper adjacent to the quarter panels. but keep in mind, that bumper is probably off a shade or two anyway, as most bumpers come this way from factory. (fun fact, but for some OCD people, sorry)
any questions regarding repairs, pm me. misconception on body/paint urks me.



