When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had my full set of forged alloy wheels restored. After hiring a detailer to use non-toxic cleaners, two of my four wheels had the silver lining stripped from the channel of the rim. I attached an image for reference.
Does anyone have experience/suggestions for recreating the silver channel along the rim?
12 C63BS Magno Alanite Grey, 25 X5 Msport, 08 BMW E93, Ducati Hyper 698
So that doesn’t make any sense as the silver groove is machined and not coated with anything except maybe some clear coat, so you can’t remove it literally not possible. I would say it is more likely the wheels in question have been refinished fully black including the grove and they had some silver applied over the black that was been removed. If they are factory finished you can see the machining markets in the groove, if it looks painted where the silver is it isn’t factory and the groove is never coated black like your picture, that wheel has been refinisheds.
2000 Acura NSX, 2012 C63 P31 (gone and not forgotten), 2015 C63 507
Looks like they painted/refinished the wheel in all black and filled in the groove.. will prob need to strip the paint in that groove carefully as to not to peel it elsewhere
So that doesn’t make any sense as the silver groove is machined and not coated with anything except maybe some clear coat, so you can’t remove it literally not possible. I would say it is more likely the wheels in question have been refinished fully black including the grove and they had some silver applied over the black that was been removed. If they are factory finished you can see the machining markets in the groove, if it looks painted where the silver is it isn’t factory and the groove is never coated black like your picture, that wheel has been refinisheds.
I'm aware. I had the wheels restored because there were a few minor scratches and curb rash along the rim of the wheels.
Several shops I called in the area do not have the 5-axis CNC machine required to create the silver etching along the rim channel. The shops I called that did have the right equipment only take on projects for specific brands — Mercedes-AMG not being one of them.
'04 E55 (Gone but not forgotten), '13 C63 P31 (RIP), another '13 C63 PP
Looks like he forgot to mask the lip when he repainted the rest of the wheel. It's just a polished finish with clear. You could probably have the guy strip them and do it right this time I would think?
So that doesn’t make any sense as the silver groove is machined and not coated with anything except maybe some clear coat, so you can’t remove it literally not possible. I would say it is more likely the wheels in question have been refinished fully black including the grove and they had some silver applied over the black that was been removed. If they are factory finished you can see the machining markets in the groove, if it looks painted where the silver is it isn’t factory and the groove is never coated black like your picture, that wheel has been refinisheds.
I'm aware, there was some curb rash on the wheels, so I hired a local wheel restoration company for the full set, which required sandblasting and powder coating. I wasn't present when the wheels were sandblasted, so it's very possible that the silver channel was exposed but they didn't think to mask off the channel before powder coating the wheels.
What exactly would I need to ask for to bring back the factory machined channel? I've been told by a few other enthusiasts that I'll need to find a shop with a 5-axis CNC machine to get this done.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
