SCed m156 belt length...
Belt I bought today is a Dayco brand and is supposedly 1/4" shorter than the Gates that was on it. This belt is visibly and physically loose and sqeals and flops like crazy. Tensioner seems tight as a drum so I'm confused.
Any ideas?
Belt I bought today is a Dayco brand and is supposedly 1/4" shorter than the Gates that was on it. This belt is visibly and physically loose and sqeals and flops like crazy. Tensioner seems tight as a drum so I'm confused.
Any ideas?
Dayco- 5061075 - 170.48 inch effective length - the band-aid not working out.
If running the Southways SledgeHammer 40% overdrive upgrade, the belt is a 8PK1589.
Dayco- 5061075 - 170.48 inch effective length - the band-aid not working out.
If running the Southways SledgeHammer 40% overdrive upgrade, the belt is a 8PK1589.
EDIT: Forgot to ask, did you check the number on the belt itself vs what was printed on the paper sleeve it comes in? I’ve seen that before, people at the parts store will end up selling a “mismatched” belt.
Last edited by Joshinator99; Nov 26, 2023 at 09:36 AM.
Trending Topics
You indicate that the Gates is 107.75 inches, & the Dayco is 170.48.
At 170.48, it may indeed be a little loose - it is ~64 inches too long
The Best of Mercedes & AMG
Probably needed a new belt and pulleys anyway, so livin' and learnin' over here.
Email me via ken@southways.com.au if you need the complete kit install guide.
Went under the 2nd pulley from the right on the bottom instead of over it. Stock is under, Magnuson is over. 🤘









