Air Intake Options
MBWorld Fanatic!
Joined: Dec 2019
Posts: 1,511
Likes: 424
From: Florida
AMG C63s
K&N left, ZAC right ...
Member
Joined: Dec 2020
Posts: 129
Likes: 11
From: Orange County
2018 C63
I think i like the Modal set up with the way they isolate the filter from the rest of the engine and heat
who makes the carbon fiber ram air set up you have? Very nice
Super Member
Joined: Dec 2019
Posts: 551
Likes: 133
From: Miami, Florida
W205 C63 AMG Coupe
Member
Joined: Aug 2020
Posts: 114
Likes: 13
From: Sydney, Australia
2016 C63s Estate Edition 1
I respectfully disagree, it is not truthful to say every other company aside from XYZ does not provide gains. Our design has been tested internally and with users (on this forum) and has shown time and time again to improve 60-130mph times and increase power. We use in house ANSYS FLUENT CFD conducted by a simulation expert to create and organic flow profile that optimizes the fluid path. Additionally, our heat shields have a reflective thermal barrier and a sealed top to prevent hot air from entering the filter element.
You can see all of our performance test data, as well as a bunch of customer testimonials in this thread: https://mbworld.org/forums/c63-c63s-...ks-intake.html
You can see all of our performance test data, as well as a bunch of customer testimonials in this thread: https://mbworld.org/forums/c63-c63s-...ks-intake.html
MBWorld Fanatic!
Joined: Dec 2019
Posts: 1,511
Likes: 424
From: Florida
AMG C63s
SPONSOR
Joined: Jul 2016
Posts: 3,024
Likes: 395
From: Colorado, USA
E55 C63
best bang for your buck is downpipes by far. The fact you can get downpipes for $750 (1/2 the cost of some of these intakes) is crazy
our kit isnt done, Carbon tubes or powdercoated tubes should really look awesome especially with our custom turbo heat shield. we will have a spot for your engine builder.
our kit isnt done, Carbon tubes or powdercoated tubes should really look awesome especially with our custom turbo heat shield. we will have a spot for your engine builder.
MBWorld Fanatic!
Joined: Aug 2012
Posts: 1,218
Likes: 315
From: Pearland, Tx
2020 AMG GTC Coupe & 2018 Macan Turbo
MBWorld Fanatic!
Joined: Dec 2012
Posts: 1,537
Likes: 372
From: Austin, TX
2017 Porsche 911 C4
Uh how do you think air gets the the filters in the sealed OEM boxes? There are air scoops and an intake tube that draws air from the front of the car and rams it into the sealed airbox - it still uses that do primarily draw air in aftermarket intakes sealed to the hood, closed, open, etc.
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Member
Joined: Dec 2020
Posts: 129
Likes: 11
From: Orange County
2018 C63
MBWorld Fanatic!
Joined: Dec 2019
Posts: 1,511
Likes: 424
From: Florida
AMG C63s
Member
Joined: Dec 2020
Posts: 129
Likes: 11
From: Orange County
2018 C63
Probably better to do what you did
Member
Joined: Aug 2020
Posts: 114
Likes: 13
From: Sydney, Australia
2016 C63s Estate Edition 1
MBWorld Fanatic!
Joined: Dec 2019
Posts: 1,511
Likes: 424
From: Florida
AMG C63s
Member
Joined: Aug 2020
Posts: 114
Likes: 13
From: Sydney, Australia
2016 C63s Estate Edition 1
SPONSOR
Joined: Jul 2016
Posts: 3,024
Likes: 395
From: Colorado, USA
E55 C63
Check ours out! https://www.vrpspeed.com/product/vrp...take-kit-m177/
Newbie
Joined: Oct 2019
Posts: 9
Likes: 1
2019 C63 AMG
im not the person you asked but I’ll give my experience with BMS.
The piping is cheap and came with metal shavings that I ended up having to use wd40 and water to get out. But before that was an issue they sent me the wrong parts and gave me flak for trying to hold them accountable for it.
Once the actual parts I was supposed to get arrived; the piping doesn’t have any crimping or a way for the hoses to stay attached even with the clamps. So you have to crimp the end of the piping yourself if you don’t want the hose to pop off.
Don’t waste your money with BMS.
MBWorld Fanatic!
Joined: Dec 2019
Posts: 1,511
Likes: 424
From: Florida
AMG C63s
im not the person you asked but I’ll give my experience with BMS.
The piping is cheap and came with metal shavings that I ended up having to use wd40 and water to get out. But before that was an issue they sent me the wrong parts and gave me flak for trying to hold them accountable for it.
Once the actual parts I was supposed to get arrived; the piping doesn’t have any crimping or a way for the hoses to stay attached even with the clamps. So you have to crimp the end of the piping yourself if you don’t want the hose to pop off.
Don’t waste your money with BMS.
The piping is cheap and came with metal shavings that I ended up having to use wd40 and water to get out. But before that was an issue they sent me the wrong parts and gave me flak for trying to hold them accountable for it.
Once the actual parts I was supposed to get arrived; the piping doesn’t have any crimping or a way for the hoses to stay attached even with the clamps. So you have to crimp the end of the piping yourself if you don’t want the hose to pop off.
Don’t waste your money with BMS.
Member
Joined: Jun 2022
Posts: 200
Likes: 52
W205 C63S T
Nice intakes bought straightaway from Alibaba.com
SPONSOR
Joined: May 2018
Posts: 430
Likes: 108
From: Australia, with warehouse in HK
AMGs :)
The new smaller one can be purchased here.. and is as small a diameter possible while still fitting the 100mm inlet.
Our website has just received a major update, more spare parts will be online soon, in the meantime if you need anything just contact us via the website.
Junior Member
Joined: Dec 2022
Posts: 21
Likes: 1
2021 GLC63s Coupe
Damnnn, i didn't know BMS rolled like that. I thought they manufactured in-house. I'm not too concerned about the price hike because ordering, redistribution, quality control, all that costs money but i didn't think they just sold pre-fab stuff from China.
