CLK-Class (W209) 2003 on: CLK 270 CDI, CLK 200K, CLK 200 CGI, CLK 240, CLK 320, CLK 350, CLK 500, CLK 550 [Coupes & Cabriolets]

Screws needed for undercar shield

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-06-2017, 02:29 PM
  #1  
Member

Thread Starter
 
labguy's Avatar
 
Join Date: Sep 2013
Location: near Savannah, GA
Posts: 231
Received 28 Likes on 19 Posts
2014 E350 Sedan
Screws needed for undercar shield

My Indy told me that several of my screws are missing from the plastic piece under the car. I have done some looking but can't seem to find these screws.

Can a brother get some help?
Old 10-06-2017, 07:03 PM
  #2  
MBWorld Fanatic!
 
Yidney's Avatar
 
Join Date: Dec 2010
Posts: 2,109
Received 110 Likes on 101 Posts
2008 CLK550 Cab
They have an 8mm hex head, and a big flat washer and are basically like very coarse sheet meal screws. It's the sort of thing you probably will not find an exact match for unless you ask the dealer. For stuff like that I go to the dealer because even inflated prices are only a couple bucks. Just tell them you need belly pan screws.
Old 10-06-2017, 10:18 PM
  #3  
MBworld Guru
 
Rudeney's Avatar
 
Join Date: Dec 2009
Posts: 10,783
Received 999 Likes on 868 Posts
NO LONGER ACTIVE
The part number is N000000001410. They are about $2 each at the dealer.
Old 10-07-2017, 07:49 AM
  #4  
Member

Thread Starter
 
labguy's Avatar
 
Join Date: Sep 2013
Location: near Savannah, GA
Posts: 231
Received 28 Likes on 19 Posts
2014 E350 Sedan
Thank you, gentlemen.
Old 10-09-2017, 08:26 AM
  #5  
Senior Member
 
TechSuperstar's Avatar
 
Join Date: Sep 2002
Location: Worcester, MA
Posts: 352
Received 12 Likes on 10 Posts
15' CLS400
If they're missing it's also possible they're stripped. Half of mine don't tighten and I'm surprised they don't fall out.
Old 10-09-2017, 08:56 AM
  #6  
MBWorld Fanatic!
 
Yidney's Avatar
 
Join Date: Dec 2010
Posts: 2,109
Received 110 Likes on 101 Posts
2008 CLK550 Cab
Good point. OP, you might also need to replace some of the metal clips the screws go in to.
Old 11-07-2017, 09:55 AM
  #7  
Member

Thread Starter
 
labguy's Avatar
 
Join Date: Sep 2013
Location: near Savannah, GA
Posts: 231
Received 28 Likes on 19 Posts
2014 E350 Sedan
Finally went to dealer to purchase the screws - $6.88 each! When I complained about the price, he quickly lowered it to $4.00 each. Then when I asked about the clips, he said that he would sell the screws and clips to me for $3.50 each. So, after spending $30.00, I walked out with 4 screws and 4 clips.
Old 11-07-2017, 12:28 PM
  #8  
MBWorld Fanatic!
 
Yidney's Avatar
 
Join Date: Dec 2010
Posts: 2,109
Received 110 Likes on 101 Posts
2008 CLK550 Cab
Originally Posted by labguy
Finally went to dealer to purchase the screws - $6.88 each! When I complained about the price, he quickly lowered it to $4.00 each. Then when I asked about the clips, he said that he would sell the screws and clips to me for $3.50 each. So, after spending $30.00, I walked out with 4 screws and 4 clips.
Wow, those are almost Audi prices!
Old 11-07-2017, 09:07 PM
  #9  
MBworld Guru
 
Rudeney's Avatar
 
Join Date: Dec 2009
Posts: 10,783
Received 999 Likes on 868 Posts
NO LONGER ACTIVE
Those are the types of things I usually add-on to my online orders when I buy something that costs a lot to ship. They usually don't increase the shipping costs because they just toss them in.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Screws needed for undercar shield



All times are GMT -4. The time now is 11:27 PM.