CLK Black Series Steering Wheel
How about Ari's blacked out E63 that you have posted many pics of on this site....Wow, where should I begin....The HRE's you installed rubbed like crazy, so you roll the fenders and CRACK the PAINT. Then have it resprayed, horrible blend lines and pitted paint that feels like 1000 grit sandpaper. Niiiiiice. Lets not forget while it was under your supervision someone took it joyriding, took their kids to school, curbed a wheel, drove it 40 miles and left the tank empty. LOL !!!! Yes, you are a consummate professional, Jon. Shall I have both Ari and Gene come here and post their affirmation ???
Or how about my buddy Dave. He has 4 E30 M3's, and E46 and a new M5. You spent a month on his E30 track car, block, heads, tranny everything in a million pieces. You told him it'd take a "week or so". A month later nothing is done....You tell people he's an idiot and you "pad his bill and he just pays it". You are not even smart enough to know that what you say will come back to people it shouldn't.
So, I think those are very good examples of how our personal lives intersected with you business.
So, answer something for us all, Jon. Are you, or are you not being EVICTED right now ? It' a simple yes or no question...and if you LIE, like you always do, then I will post a copy of the eviction notice.
I think I've proved all I need to, Jon. But, if you want me to continue, I'd be happy to. Or, you could not respond and get lost once and for all.
Last edited by LZH; Apr 25, 2008 at 03:56 AM.
Even if i have had issues with my landlord; im still here and not going anywhere. I can also post the deposition where he lied! If I was so called being evicted; I would be closed by now! That is not true! But if you feel that you need to be correct then say what you want.
I cannot stop you from bashing me but I don’t understand why you continue with this.
I never asked to disassemble you Black Series... Just wanted to read the ECU & TCU...As for the E55... The car has no warranty due to the fact that it was voided due to add ons that I never did to the car! The steering angle sensor was defective... A known issue in the 55 AMG... Which I fixed!!!
As for Ari's car He wanted a 295’s on the rear, therefore needed to have the fenders rolled. I explained that they were not 100% and Idid not charge for it. I offered to fix it. It was is choice to not have the job finished!
As for the BMW yes it took a little longer... but there were several changes throughout the process which in turn took longer to finalize the job. In the car is being finished properly!
The boat; you were there when we put the props on. But you may say its all my fault go ahead…
You have a personal vendetta and out to get me.
I have better things to do then continue going back and forth with you.
I am happy with where I am... I am not going anywhere even though you state otherwise!
Too bad you feel the need to discredit my company.
Even if i have had issues with my landlord; im still here and not going anywhere. I can also post the deposition where he lied! If I was so called being evicted; I would be closed by now! That is not true! But if you feel that you need to be correct then say what you want.
I cannot stop you from bashing me but I don’t understand why you continue with this.
I never asked to disassemble you Black Series... Just wanted to read the ECU & TCU...As for the E55... The car has no warranty due to the fact that it was voided due to add ons that I never did to the car! The steering angle sensor was defective... A known issue in the 55 AMG... Which I fixed!!!
As for Ari's car He wanted a 295’s on the rear, therefore needed to have the fenders rolled. I explained that they were not 100% and Idid not charge for it. I offered to fix it. It was is choice to not have the job finished!
As for the BMW yes it took a little longer... but there were several changes throughout the process which in turn took longer to finalize the job. In the car is being finished properly!
The boat; you were there when we put the props on. But you may say its all my fault go ahead…
You have a personal vendetta and out to get me.
I have better things to do then continue going back and forth with you.
I am happy with where I am... I am not going anywhere even though you state otherwise!
Too bad you feel the need to discredit my company.
As far as your eviction is concerned, well, only time will tell….Anyone familiar with lease agreements knows that an eviction, if fought, can be prolonged for up to nine months. I figure you have a few more months before they boot your sorry ***.
With regards to my boat. Yes, I was in the shop the day you installed the 5 blade props. Actually, if you remember correctly, I was standing there watching you because I was and always have been skeptical of your mechanical knowledge. Again, they were YOUR props off your old boat that you crashed and I assumed you knew what you were doing - man was I ever wrong.... So, while you were installing the props, I asked, “Do you know what you’re doing?” And your standard response was, “OF COURSE, I’M A PROFESSIONAL.” LOL, yeah, professional idiot. The fact of the matter remains, Jon. You installed them backwards and in turn caused damage to my boat. But, I find it interesting that even to this day you cannot admit your mistake, accept blame and move on….you have some major psychological problems Jon. It’s actually quite interesting to see just exactly how a pathological liar believes his own lies.
I am in no way shape or form trying to discredit your company as you suggest above. I am simply informing the other members here about my experiences with you both personally and professionally. This is only my opinion, take it FWIW.
The Best of Mercedes & AMG
I would have kicked him (her or anyone like that) to the curb long, long before amassing that many horror stories.
I just sold mine a few months ago, warm weather is here & I'm pissed...

I have no idea why he sold it as they are such unique and sought after boats/hulls. Glad to meet a fellow boater on here, your boat looks amazing - why did you sell it ??? Also, looks like you have XR uppers and shorty IMCO lowers ? I just put the same package on mine and it didn't like the 1" shorter X dimension so I just installed the IMCO spacer.

I have no idea why he sold it as they are such unique and sought after boats/hulls. Glad to meet a fellow boater on here, your boat looks amazing - why did you sell it ??? Also, looks like you have XR uppers and shorty IMCO lowers ? I just put the same package on mine and it didn't like the 1" shorter X dimension so I just installed the IMCO spacer.
The boat did have XR uppers & the IMCO shorty lowers. I'm fortunate enough to have Tres Martin live here & we had several solutions to make the boat run even better, although to most it would have been just fine.
One of his big things was that the shortys were too high for that hull & that a 1" spacer would make the boat handle better & even probably pick up a few mph. I was running 83-84 on Merc 500efi's with a AZ speed & Marine kit on it & 5 blade Merc props.
Have you taken Tres' performance boating class? I took it a few years ago & never regretted it, it will definitely teach you how to run your boat; very similar to taking a class from Skip Barber or Bondurant, etc.
The boat did have XR uppers & the IMCO shorty lowers. I'm fortunate enough to have Tres Martin live here & we had several solutions to make the boat run even better, although to most it would have been just fine.
One of his big things was that the shortys were too high for that hull & that a 1" spacer would make the boat handle better & even probably pick up a few mph. I was running 83-84 on Merc 500efi's with a AZ speed & Marine kit on it & 5 blade Merc props.
Have you taken Tres' performance boating class? I took it a few years ago & never regretted it, it will definitely teach you how to run your boat; very similar to taking a class from Skip Barber or Bondurant, etc.
I love this tech talk.
Of course as a landlubber, you might as well be typing in Greek.
But if it goes fast and can be modded, you got my vote. (Don't tell Obama.)
The boat did have XR uppers & the IMCO shorty lowers. I'm fortunate enough to have Tres Martin live here & we had several solutions to make the boat run even better, although to most it would have been just fine.
One of his big things was that the shortys were too high for that hull & that a 1" spacer would make the boat handle better & even probably pick up a few mph. I was running 83-84 on Merc 500efi's with a AZ speed & Marine kit on it & 5 blade Merc props.
Have you taken Tres' performance boating class? I took it a few years ago & never regretted it, it will definitely teach you how to run your boat; very similar to taking a class from Skip Barber or Bondurant, etc.
I had the same problem you described when going to the shortie lowers....reducing the X dimension by one inch made a huge difference - ESPECIALLY trying to get the boat on plane. I have two sets of props I've been working with; a set of Hydromotive 5 blades and the standard Bravo 4 blades. Neither worked very well with the shorties so I recently installed the 1" spacers from IMCO. However, I'm still having a hard time with the hole shot and the 5 blades are horrible. The 4 blades see to be what this hull likes.
I'd be interested to hear eaxactly what prop you were using and how it was getting on plane. Even now, the 4 blades work, but it literally takes about 30 seconds to get on plane....
I wish I could run a different 5 blade becasue the ones I have now are great on the top end....I saw 85.3 mph on the GPS the other day (with 1000lbs of fuel, 6 people and their respective gear). But like I said, they are horrible getting on plane...
Last edited by LZH; Apr 29, 2008 at 03:15 PM.
Getting on plane was not a problem. If you hammered it, they would blow out, but then catch & go. If you eased it to about 15mph, you could open it up with no problems at all.
I won't say they were perfect, but they were pretty good. Tres wanted to send them to his prop guy & tweak them some over the factory Merc labbing & figured he could get another 1 or 2 mph out of them.
My laundry list of easy performance mods was:
1. The 1" spacer on the lowers.
2. Merc/Kiekhaffer 380 tabs. Tres swears by the longer tabs for better responsiveness. Also, my drives were on 12" IMCO boxes (no drop) so the longer tab most likely would have made a larger improvement in my scenario.
3. Sending the props out for more detailed labbing, just for the extra tweaking. I really did like the 5 blades, they would accelerate very well at pretty much any speed. Not the best for top end, but I usually wouldn't/couldn't run all out as much as I'd spend time between 50-70 mph. (At least with all the idle & manatee zones here in FL)
Regardless of the real capabilities of 110motoring and the rest of their staff, I would never put my car in the hands of someone willing to allow themselves to be called out in public like this. It speaks to the professionalism of the company. Nothing Jon posts is personal vs business when the 110motoring logo and link are associated with his name and he has "sponsor" under it. It all reflects on 110motoring.
If one of my employees posted like this they would be fired. This actually happened when one guy was posting inappropriate information on finance.yahoo.com under the company forum. Turned out he put his real first name and he was the only one in the company who spelled his name that way. Gone. There is NO freedom of speech when it comes to how employees are expected to represent a company. I actually had one guy do this once and he was written up and the next time he was walked out. The only way I kept the customer was by calling and apologising personally. Saved me a $10M customer.
110motoring is clearly a larger operation than Euroelites. Euroelites are out of business because the detractors who they felt to be their friends on the forum demoralized them. 50% of what they were was their enthusiasm and with that gone, they gave up.
I would suggest that the forum operators have a talk with all their sponsors about how the sponsor employees should behave on these forums. They risk loosing more sponsors.
Last edited by Jon2007E63P30; May 2, 2008 at 06:25 PM.
I think he got a bum rep for that one anyway, it wasn't his fault, he was just running throttles on that IIRC, but in any event, he is the real deal, and you guys would love chatting with him.
Last edited by CWW; May 4, 2008 at 08:48 AM.








