When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Details on our Getrag/Magna 7DCL750 DCT Trans, and a Request for Repair Manual
Created this thread in an effort to consolidate more technical aspects of, and potential repair techniques for our Getrag/Magna 7DCL750 DC Trans and make searching more expeditious.
Kindly request anyone, or any of your Ferrari or Ford GT colleagues, to share a PDF of Repair Manual for our Trans - this Repair Manual is proving elusive on the interwebs.
Please find official Getrag tech specs attached.
Other, potentially helpful info/links:
Getrag 7DCL750 double clutch Transmission is used in the following models (max torque figures are included):
Mercedes SLS AMG (635 to 650 Nm)
Mercedes AMG GT (600 to 650 Nm)
Ferrari California/California 30 (485/500 Nm)
Ferrari California T (755 Nm)
Ferrari 458/485 Speciale (540/540 Nm)
Ferrari 488 (760 Nm)
Ferrari F12 (690 Nm)
Ferrari FF (683 Nm)
Ford GT (746Nm)
The 7DCL750 transmission is designed to support up to 750 Nm of torque
Videos on Issues, Repairs, Recommended Shops, etc:
1st video is particularly informative. The 2nd, not so much, but supposedly they will have a Part #2.
Ago54 (01-22-2024),BBS63 (06-19-2023),G. P (06-20-2023),Hetzle (06-20-2023),LAsunset (06-18-2023),user33 (06-20-2023) and 1 others liked this post. (Show less...)
The 1st video above from Hollywood Mechanic even links the Ferrari step by step instructions on various Trans repairs, including the more 'common' Gearbox Speed Sensor seen in our forum:
(unconfirmed if MB follows the exact same procedure, but one can make reasonable assumptions)
I just rebuilt one for an SLS that had the radial shaft seal leak, and I have done it a couple times on my GTR for other reasons. If anyone needs their DCT trans re-sealed, contact me.
I have rebuilt hundreds of these gearboxes and have an in depth intervention program as well as being able to acquire virtually every wearing component even if it is unobtanium status. Feel free to reach out to me via pm for more information!
Good afternoon. I live in Russia. Even-numbered broadcasts have not been turned on recently. The box stopped turning on. I had to restart the engine after a minute to go. Error code P0791. I gave it for repair and 2 more errors appeared and the box does not turn on at all P1904. P1903
Ferrari California 2011
Can you help remotely? Please write me what needs to be done.
Good afternoon. I live in Russia. Even-numbered broadcasts have not been turned on recently. The box stopped turning on. I had to restart the engine after a minute to
Ferrari California 2011
Can you help remotely? Please write me what needs to be done.
I have rebuilt hundreds of these gearboxes and have an in depth intervention program as well as being able to acquire virtually every wearing component even if it is unobtanium status. Feel free to reach out to me via pm for more information!
Cheers!
hi there
can you fix my 2011 Ferrari DCT (same transmission) as you guys all have! It just grenaded on me and I lost 2,4,6 and reverse!! i'm in San Diego, CA.
please email me dwattel@gmail.com - where are you located? I need my DCT rebuilt! just exploded the other day... 6 error codes , no even gears or reverse
please email me dwattel@gmail.com - where are you located? I need my DCT rebuilt! just exploded the other day... 6 error codes , no even gears or reverse
Sounds like one of the Solenoids failed. Hope you get it fixed asap!
06-17-2023, 06:57 PM
