Wheels and Tire Fitment
05-24-2017, 11:00 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2016
Location: East Bay, CA
Posts: 31
Likes: 0
Received 3 Likes
on
2 Posts
Mercedes E550 Coupe
Wheels and Tire Fitment
Sup Guys! I need your help. I am looking to buy these stock AMG Wheels off of a W205 and I wanna sure it will fit my E Coupe. I have a feeling they will fit but I am not sure. Any insight is appreciated. Thanks!
Specs are:
19x8.5 et38 with 245/35/19
19x9.5 et56 with 265/35/19
Below is the link:
https://mbworld.org/forums/wheels-ti...-like-new.html
Specs are:
19x8.5 et38 with 245/35/19
19x9.5 et56 with 265/35/19
Below is the link:
https://mbworld.org/forums/wheels-ti...-like-new.html
05-25-2017, 04:10 PM
#3
Member
Join Date: Apr 2012
Location: Vancouver, BC
Posts: 97
Likes: 0
Received 1 Like
on
1 Post
2012 E550 Coupe
The et56 on the rear will not be a flush fitment, not sure if you will have any trouble with rubbing on the inner wheel well as the wheel is pulled in quite a bit at et56.
I'd be equally concerned by an ad that begins "I am helping a buddy sell ..."
I'd be equally concerned by an ad that begins "I am helping a buddy sell ..."
05-26-2017, 10:26 AM
#4
MBWorld Fanatic!
The fronts are fine, I run 19x8.5 et40 with 255/35/19 (flush fitment).
My rear setup is flush at 19x9.5 et45 with 285/30/19.
The following users liked this post:
Jayupinwa (06-13-2019)
05-26-2017, 12:19 PM
#5
Junior Member
Thread Starter
Join Date: Sep 2016
Location: East Bay, CA
Posts: 31
Likes: 0
Received 3 Likes
on
2 Posts
Mercedes E550 Coupe
If I use a 12mm spacer in the rear will it fit?
I have 10mm and 12mm H&R hubcentric spacers in the garage I can use.
What do guys think?
thanks for the responses so far!!
I have 10mm and 12mm H&R hubcentric spacers in the garage I can use.
What do guys think?
thanks for the responses so far!!
05-26-2017, 01:12 PM
#6
Member
Join Date: Apr 2012
Location: Vancouver, BC
Posts: 97
Likes: 0
Received 1 Like
on
1 Post
2012 E550 Coupe
The 12mm spacer will make the fitment et44 which is just about right for a 9.5" wheel.
With the torque of the E550, you might consider moving to a 275 tire for a little more rubber on the road.
With the torque of the E550, you might consider moving to a 275 tire for a little more rubber on the road.
05-27-2017, 03:24 AM
#7
Junior Member
Thread Starter
Join Date: Sep 2016
Location: East Bay, CA
Posts: 31
Likes: 0
Received 3 Likes
on
2 Posts
Mercedes E550 Coupe
Got it. I will keep the fronts as is and I will probably add a 10mm or 12mm spacer in the rear so it will fit.
Just sent the payment on the wheels tonight. Hope this all works out!
Just sent the payment on the wheels tonight. Hope this all works out!
Trending Topics
06-14-2017, 10:36 PM
#10
Junior Member
Thread Starter
Join Date: Sep 2016
Location: East Bay, CA
Posts: 31
Likes: 0
Received 3 Likes
on
2 Posts
Mercedes E550 Coupe
Wheels are on and I'm lovin' it!
Front are direct bolt on and the rears have a 12mm spacer.
It's sitting damn near the fender with little room. Stance is great and ride is awesome!
Front are direct bolt on and the rears have a 12mm spacer.
It's sitting damn near the fender with little room. Stance is great and ride is awesome!
06-15-2017, 02:15 AM
#11
Senior Member
Looks awesome! I think it would really set them off if you did red pin striping around the edge like the edition one
The following users liked this post:
Siegmann (01-08-2022)
