**Koni and H&R Installed Pics Within**
11-27-2002, 08:45 PM
#1
Member
Thread Starter
Join Date: Mar 2002
Location: Southern California
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
**Koni and H&R Installed Pics Within**
Finally got the Koni adjustables(middle setting) and H&R Springs installed, feels like a different car. Much more stiff and aggressive. You will feel the road with this setup(positive for me). All comments welcome on my ride..
Last edited by Tarik; 11-27-2002 at 08:54 PM.
Trending Topics
11-28-2002, 12:53 AM
#10
MBWorld Fanatic!
That S*%^& is TYTE son.... Had to be said...
What percentage tint is that? Lightman got his done at 20% and it's HOT! I'm thinking 20% as well on mine when I get some time....
My $.02
What percentage tint is that? Lightman got his done at 20% and it's HOT! I'm thinking 20% as well on mine when I get some time....
My $.02
11-28-2002, 05:27 AM
#12
Member
Thread Starter
Join Date: Mar 2002
Location: Southern California
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
I would get 19's, but the offset(for the monoblocks) doesnt work with the E class. The tint is 13% all around, if i'm not mistaken. Thanks for the positive comments guys.
11-28-2002, 03:22 PM
#13
Senior Member
Join Date: Jan 2002
Location: Cleveland, OH
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
1999 Mercedes E300 TurboDiesel
Tarik, looks good. Ultra flashy with the chrome wheels. Would you please take and post or email me pictures of your wheel's clearance on the front and back, directly at the wheel, not in the dark?
The reason I say so, is because i have H&R/Bilstein installed on my '99, and it's much lower than yours in the front, and could be the same, or higher in the back.
I think the difference may be the much heavier weight of the cast iron diesel engine. I think H&R may have screwed up in specifying the same *springs*for the E300 as the 320, possibly the engine weight is more in line with the 8cyls....
What number spring pads did you use? What were on it stock?
Edited for typos..
The reason I say so, is because i have H&R/Bilstein installed on my '99, and it's much lower than yours in the front, and could be the same, or higher in the back. I think the difference may be the much heavier weight of the cast iron diesel engine. I think H&R may have screwed up in specifying the same *springs*for the E300 as the 320, possibly the engine weight is more in line with the 8cyls....
What number spring pads did you use? What were on it stock?
Edited for typos..
Last edited by Lightman; 12-01-2002 at 01:20 PM.
11-28-2002, 04:29 PM
#14
Member
Thread Starter
Join Date: Mar 2002
Location: Southern California
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Lightman, I'm actually not sure what pads I was running. The installer did not change the pads. I will get more pics for you detailing the front and rear clearance. How low is the front clearnce for you?
11-28-2002, 04:32 PM
#15
Member
Thread Starter
Join Date: Mar 2002
Location: Southern California
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
What do you guys think about getting HID conversion kit? I've seen them on a few cars. Don't know if its worth 300-600 bones...
Any insight on quality "real" Xenon kits would be appreciated.
Any insight on quality "real" Xenon kits would be appreciated.
11-29-2002, 10:22 AM
#17
Out Of Control!
Tarik
That's a very nice setup you've got there! Thumbs up! By the way what city is that? The houses there looks very very nice!
Maybe you would like to meet one of these days.
That's a very nice setup you've got there! Thumbs up! By the way what city is that? The houses there looks very very nice!
Maybe you would like to meet one of these days.
11-30-2002, 08:40 PM
#20
Out Of Control!!
Originally posted by Lightman
I think the difference may be the much heavier weight of the cast iron diesel engine. I think H&R may have screwed up in specifying the same shocks for the E300 as the 320, possibly the engine weight is more in line with the 8cyls....
What number spring pads did you use? What were on it stock?
I think the difference may be the much heavier weight of the cast iron diesel engine. I think H&R may have screwed up in specifying the same shocks for the E300 as the 320, possibly the engine weight is more in line with the 8cyls....
What number spring pads did you use? What were on it stock?
12-01-2002, 01:19 PM
#22
Senior Member
Join Date: Jan 2002
Location: Cleveland, OH
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
1999 Mercedes E300 TurboDiesel
Mach, duh 
. Obviously a typo on my part, which you might have picked up from the H&R part of my quote. I had mentioned that I have the H&R/Bilstein combo. The H&R is the spring portion of the suspension mod, and the part which I feel is incorrectly spec'd.
Edit - didn't see tarik's post above to the obvious mistake I made typiing and Mach made interpreting it. Sorry for the redundance...
Anyway, I have kept changing them out to the highest pad, the #5 front pad, and still can barely(if that) stick a finger between the top of the tire and body of the car...
The back has a #2 pad and looks perfect, albeit looks a little jacked up like a 80's musclecar due to the front being so low. When i had #2 pads all around, you couldn't even see the top of the front tire, the rim was even with the body......
. Obviously a typo on my part, which you might have picked up from the H&R part of my quote. I had mentioned that I have the H&R/Bilstein combo. The H&R is the spring portion of the suspension mod, and the part which I feel is incorrectly spec'd.Edit - didn't see tarik's post above to the obvious mistake I made typiing and Mach made interpreting it. Sorry for the redundance...
Anyway, I have kept changing them out to the highest pad, the #5 front pad, and still can barely(if that) stick a finger between the top of the tire and body of the car...
The back has a #2 pad and looks perfect, albeit looks a little jacked up like a 80's musclecar due to the front being so low. When i had #2 pads all around, you couldn't even see the top of the front tire, the rim was even with the body......
Last edited by Lightman; 12-01-2002 at 01:23 PM.
12-02-2002, 05:33 PM
#23
MBWorld Fanatic!
Join Date: Aug 2002
Location: NYC/NJ.
Posts: 3,381
Likes: 0
Received 0 Likes
on
0 Posts
W209 - W163
looks nice and clean!!! But for some reason i dont like the grill, i never did like those grills... get the full CL grills with the big star, that would look nice!
12-03-2002, 03:31 PM
#24
Senior Member
Join Date: Jan 2002
Location: Boston
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
M3 Cab
chrome on white looks great. that would have been my colour choice if there were more E55's at the time i made my purchase. you might consider a flat badge as your next mod. cheap and easy to do.
12-03-2002, 08:26 PM
#25
Senior Member
Join Date: Jan 2002
Location: Cleveland, OH
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
1999 Mercedes E300 TurboDiesel
Ya go and modify your car and then everyone wants to tell ya what ELSE you should do. Dude , the ride looks SWEET! Congrats. Doesn't always have to be a project in motion....usually is though
