Jen_Kenne

Mercedes-Benz Bluetooth Cradle Replacer Adapter.


It appears this unit,Part # B67875855, eliminates the need for the Bluetooth Cradle and the V60 Bluetooth adapter.

Any users of this approach?

lkchris

https://mbworld.org/forums/audio-ele...bluetooth.html

Jen_Kenne

Yes, I posted there too. The cradle-adapater-replacement seems to be the solution for the 2003-2004 E-class. Other years have other solutions.

konigstiger

http://wireless4mb.com/page8/page8.html

Jen_Kenne

The unit in my post is located on page 33.

http://wireless4mb.com/page19/page33/page33.html

Any experience with this product on this forum?

Benz-O-Rama

It's commonly referred to as "puck with tail". I have the standard cradle with bluetooth puck and it works great. Others have gone with this solution and have had good results. My only qualm is that the puck just flops around in your armrest unless you velcro it down.

Mackhack

I have it in, i put up a home made manual for everyone who is interested. I put mine in within 15 minutes incl. taking the pictures for a step by step manual.

I still have some brand new OEM Puck with tails in my shelf below MSRP.

Then all you have to do is going in to get it enabled via SDS!

Jen_Kenne

SDS! I thought they were disbanded, except for Bill Ayres!

Jen_Kenne

Puck with tail! That sounds pretty kinky.

Jen_Kenne

Mackhack - See my PM -- and Yes, I would like a copy of your installation manual.

Thanks!

P.S. Three in a row - I'm not flooding, it just turned out that way.

fortlaudsummer

I have this installed in my car and I love it...no complaints.

One suggestion: Go to MB FTL to have it version coded...they're the only ones who seemed to know what the hell was going on.

Are you going to the Euroteck GTG Jen? I can show you it there if so.

Jen_Kenne

You like them better than the Pompano shop? What is 'version coded?' and why do I need it?

Euroteck GTG?????? What, when, where?

Thanks!

fortlaudsummer

Follow this link for the Euroteck event:
https://mbworld.org/forums/events-ga...st-2009-a.html
It is this coming weekend.....

Once you install the bluetooth puck (or have it installed, but its extremely easy), you will need to have the car hooked up to the computer for das version coding. Basically, they will set your teleaid to "phone present" in the computer so your car will recognize the phone via puck.

Yes, I do like MBFTL better than any of the other shops as it seems they are the most competent. Pompano has good customer service, MB Miami is, well, less than desirable to put it nicely. I have no first hand experience with Coral Gables, but it is rather far, nor have I tried PPines. Delray parts guys are idiots on the phone. This is how I wound up at my MBFTL recommendation.

Jen_Kenne

Thanks very much!

Eurotech is Saturday. I will try to make it.

GFEAR

WHATS EUROTECH? something good going on in south fla?

Jen_Kenne

Follow this link for the Euroteck event:
https://mbworld.org/forums/events-gatherings/304690-south-florida-mbz-meet-bbq-august-1st-2009-a.html

It is Saturday - August 1, 2009 - 1:00 p.m. until 5:00 p.m.

murman

What's your asking price?

Yacht Master

Here ya go,

https://mbworld.org/forums/w211-amg/...bluetooth.html

Jen_Kenne

Thanks again! I wish there was an easy way to cross-post. Some of the discussion here applies to the AMG W211 and vice versa.

Yacht Master? My buddy was the vp of sales at Cheoy Lee. Perhaps you know him?

mmalrai

the site http://wireless4mb.com mentions on its compatibale phone list that the v60 bluetooth cradle needs if im using Iphone a firm level v1.1.4 . well the firmware on my iphone is 2.1 and im was about to upgrade it. would the cradle still be able to pair with my phone? Also my wifes moblie is nokia e65 , could it be paired as well "not at the same time with iphone" but would the cradle recognoze it??