My first mod of 2012.. E550 No Smoking Edition...
#1
Member
Thread Starter
Join Date: Nov 2010
Location: Los Angeles, CA
Posts: 201
Likes: 0
Received 1 Like
on
1 Post
2008 E550
My first mod of 2012.. E550 No Smoking Edition...
While digging through the forums I came across a user who posted the plastic mat to remove the ashtray and put in the black plastic liner.
Nice little upgrade for $5 if you will never ever use the ashtray..
Tomorrow will be doing the AMG accelerator pedal install and Sprint Booster V.1 install (snagged the one unsold on ebay for under a bill, figured it was worth trying from all the feedback, see how it works with the OEtuning tune)..
Nice little upgrade for $5 if you will never ever use the ashtray..
Tomorrow will be doing the AMG accelerator pedal install and Sprint Booster V.1 install (snagged the one unsold on ebay for under a bill, figured it was worth trying from all the feedback, see how it works with the OEtuning tune)..
#4
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,418 Likes
on
2,857 Posts
2012 CLS63
wow you got a V1 for under 100? not too shabby
#6
Member
Thread Starter
Join Date: Nov 2010
Location: Los Angeles, CA
Posts: 201
Likes: 0
Received 1 Like
on
1 Post
2008 E550
Yep. Where is the 10mm bolt? under the black cap? I've been trying to figure it out.. I keep reading its a 2mn install, but can't find the bolt on E class from the C class instructions..
Also what happens when the accelerator goes all the way down and that button is pressed? does it do anything?
And when I install the pedal? should I remove the cover and just use the new cover, or install the whole assembly I got with the curver lower black piece? it seems from the instructions, I should just take the alum piece, slip it off, WD40 it up and slip it over the old piece.
Also what happens when the accelerator goes all the way down and that button is pressed? does it do anything?
And when I install the pedal? should I remove the cover and just use the new cover, or install the whole assembly I got with the curver lower black piece? it seems from the instructions, I should just take the alum piece, slip it off, WD40 it up and slip it over the old piece.
#7
Senior Member
Yep. Where is the 10mm bolt? under the black cap? I've been trying to figure it out.. I keep reading its a 2mn install, but can't find the bolt on E class from the C class instructions..
Also what happens when the accelerator goes all the way down and that button is pressed? does it do anything?
And when I install the pedal? should I remove the cover and just use the new cover, or install the whole assembly I got with the curver lower black piece? it seems from the instructions, I should just take the alum piece, slip it off, WD40 it up and slip it over the old piece.
Also what happens when the accelerator goes all the way down and that button is pressed? does it do anything?
And when I install the pedal? should I remove the cover and just use the new cover, or install the whole assembly I got with the curver lower black piece? it seems from the instructions, I should just take the alum piece, slip it off, WD40 it up and slip it over the old piece.
Where did you get the little black mat to put in place of the ash tray?
Trending Topics
#8
Senior Member
Join Date: Oct 2011
Location: Coastal Georgia, USA
Posts: 314
Likes: 0
Received 29 Likes
on
26 Posts
2007 E350 Sedan