Hello again,
I want to replace my old panel for climate control with dual zone with part number 2118303190. Put new, take out the old, but the air conditioner even in the off position remains activated. Is there anything that should be coded with the diagnostic equipment or retrofit is impossible

 

There is no Mercedes without dual zone climate control. Can be with four-zone or dual. Mine is a dual of 2005. I put the same control but with display. I have diagnostic equipment but where coding? Тried everything, always the compressor is turned on whether the button lights or does not light AC. Vin is WDBUF65J25A681444

 

Dual zone panel with display came with facelift I think, so that may cause some compatibility problems... could be only need of variant coding like said above

 

Hello, I read many topics for this retrofit. I have and four-zone control, but it also keeps the air conditioning compressor switched permanently. If anyone knows where this is coded block- which menu please share

 

Friend if you have nothing to say on the topic silent. Writes that make retrofit with part numbers of the parts that shall be trying to install. Is from car with dual zone climate control with display, my original is without display. Nobody talks about four-zone climate control with rear display!

I wonder why not turned off compressor with simple replacement and what to code if this is a problem

 

Hey "integrale," check out this link, a lot of good info:

https://mbworld.org/forums/e-class-w...trol-unit.html

 

^

 

Colleagues in both Thread No answer

 

Some forum members have had success with this conversion and others have not, as can be seen from the various threads. In your situation, we simply do not know how to guide you, other than encourage you to read the threads and follow what others have done. Wish you well!

 

Colleagues, I've read all the topics on the issue. There is no just logic. Or need a software update of all modules ... Can I do it without visiting the dealer. I have own SDS from Chinese

 

like everybody else on this thread is saying. all you need to know is written/said on the other thread mate. theres no ONE definite answer to your problem. some works as plug and play, some wont. you just have to keep searching/reading/experimenting. good luck!

 

Colleague, I have already collected three modules, two four-zone display of 2004 and a dual display of 2008. No success ... Any suggestions who part number will work correctly?

 

try ordering a dual zone from a pre facelip W211.

 

I have it 2118303190 from 20008 NO luck

 

Try to look for the same part number i bought mate, i believe i posted it on the other thread. That should work with your dual zone car.

 

Pls, write here the number

 

https://mbworld.org/forums/e-class-w...ol-unit-4.html

post #83

 

Colleagues, I fixed I read with SDS old equipment settings and typed in the new module. Everything works correctly.
Now I have to sell two more modules that I bought one dual and one four-zone with display
If someone is willing to put the facelifted control can write to me