Bulletins 207 coupe & 212 sedan
#376
MBWorld Fanatic!
Join Date: Apr 2006
Location: Dallas-Ft.Worth,TX
Posts: 4,653
Received 1,755 Likes
on
1,125 Posts
2016 E350 Sport
konigstiger, please review this thread (link below). Is there a service bulletin for overheated Anti-Theft Alarm LED that marrs the finish in the dash when the light fails? If it happened to mine, I imagine it has hit others, too. 2016 E-350... Thanks so much...
https://mbworld.org/forums/e-class-w...-bulletin.html
https://mbworld.org/forums/e-class-w...-bulletin.html
#377
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Not aware of any bulletin request switch block (upper control panel) be replaced under warranty. EPC documents original UPC installed at production is replaced.
#378
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Delete.
Last edited by konigstiger; 07-24-2018 at 01:42 PM.
#379
Newbie
LI82.85-P-058928 Apr14 – MY14 212, 218, 207, 117, 156, 166, 172, 176, 204, 231, 246, 463 Sirius application constantly displays “Updating Channels” audio output from most recent satellite station is present but no other stations can be selected. Complaint occurs sporadically after ignition on following ignition cycle issue disappears temporarily. Press COMAND on button for about 10 seconds this will perform soft reset issue may return after next CAN sleep – do not replace any parts matter under investigation.
Does anyone know if there has been an update to this issue yet? Have they found a cause / solution?
The following users liked this post:
pwmeek (07-16-2018)
#380
Newbie
My 2011 E550 does this every so often. It only runs for about a minute or two then resumes normal operation. This is maybe just normal updating, but it seems to happen oftener than any normal channel changes.
#381
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,114
Received 1,749 Likes
on
1,394 Posts
1922 Ford Model T / no OBD
My 2014 car has over 180k miles, so warranty is long gone, but reading about all those extended warranties on emission parts, anybody has experience how it looks on ULEV cars?
I have to spend $2500 on new DPF for my Bluetec, what comes with over >2 months wait for rebuild to come from Germany.
I have MI showing DPF replaced 60k miles ago , so something is very wrong with this situation and having "the brick" occupying my garage for 2 months is not making me happy. Even I am happy with it when it drives
I have to spend $2500 on new DPF for my Bluetec, what comes with over >2 months wait for rebuild to come from Germany.
I have MI showing DPF replaced 60k miles ago , so something is very wrong with this situation and having "the brick" occupying my garage for 2 months is not making me happy. Even I am happy with it when it drives
#382
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Cannot find 2014 service warranty with e250BT here is a 2013 copy (e350BT) DEF warranty is 8 years/80,000 miles. To the best of my knowledge no extended warranty.
The following users liked this post:
kajtek1 (07-18-2018)
#383
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,114
Received 1,749 Likes
on
1,394 Posts
1922 Ford Model T / no OBD
Thanks. Knowing what to look for, I was able to find one for 2014 as well.
Seems only PZEV vehicles do have 10 years/150,000 miles warranty on emission parts.
Mine is ULEV and looks like 250 Bluetec was never PZEV.
Funny to observe maze of laws. What was in past called "California smog requirements" now is observed in 7 (?) states and the number keeps growing.
Meaning in any calendar year you can have E class build with at least 4 different smog requirements.
Seems only PZEV vehicles do have 10 years/150,000 miles warranty on emission parts.
Mine is ULEV and looks like 250 Bluetec was never PZEV.
Funny to observe maze of laws. What was in past called "California smog requirements" now is observed in 7 (?) states and the number keeps growing.
Meaning in any calendar year you can have E class build with at least 4 different smog requirements.
#384
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Yes found that also however, as mentioned e250BT in not listed.
#385
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Recall Campaign 2018080015 SEPT18 – 2018 238 E-Class Cabriolet ISOFIX cross-member for child seats may not have been mounted according to current production specification, dealer will replace. Approximately 39 vehicle affected.
Service Campaign 2017120010 AUG18 – 2017 & 2018 213, 253 (GLC) front air suspension struts may not meet current production specifications, dealer will replace. Approximately 1,339 vehicles affected.
LI46.35-P-068762 SEPT18 – 213 up to VIN A048221 scraping or squeaking noises when steering from lock to lock, replace electric steering.
Service Campaign 2017120010 AUG18 – 2017 & 2018 213, 253 (GLC) front air suspension struts may not meet current production specifications, dealer will replace. Approximately 1,339 vehicles affected.
LI46.35-P-068762 SEPT18 – 213 up to VIN A048221 scraping or squeaking noises when steering from lock to lock, replace electric steering.
#386
Junior Member
Request for data card
Konigstiger. Many thanks for the very informative posts that you make here. Please post data card for VIN WDDHF5KBXGB241680
#387
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
7/16/15
#390
Hi Konigstiger.
Thanks for all the info on this thread. I have a W212 E63 with 59000kms and extended motorplan till 2020.
Can you help,with the data sheet for this car, here is the Vin WDD2120742A63829.
What are the key TSBs I should be looking out for?
thank you
Thanks for all the info on this thread. I have a W212 E63 with 59000kms and extended motorplan till 2020.
Can you help,with the data sheet for this car, here is the Vin WDD2120742A63829.
What are the key TSBs I should be looking out for?
thank you
#391
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Invalid VIN recheck, search this thread for “AMG”.
The following users liked this post:
vishenn (10-25-2018)
#392
WDD2120742A638291
#393
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
4/12/2012
The following users liked this post:
vishenn (10-26-2018)
#394
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Recall 2018100010 OCT18 – 212, 164, 251 replace driver side airbag have dealer check VMI to see if VIN is included. Approximately 18,334 vehicles involved.
#395
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Service Campaign 2018110006 DEC18 – 2015 212, 204, x204, 166 fault in the fuel tank diagnostic software could lead to an incorrect activation of the CEL dealer will update ECU software. Approximately 47,546 vehicles affected.
Recall Campaign 2018120012 DEC18 – 2010 & 2011 212, 164, 251 Takata front driver side airbag, dealer will replace the front driver-side airbag on the affected vehicles. Approximately 24,602 vehicles affected.
Recall Campaign 2018120012 DEC18 – 2010 & 2011 212, 164, 251 Takata front driver side airbag, dealer will replace the front driver-side airbag on the affected vehicles. Approximately 24,602 vehicles affected.
#396
Newbie
Hi Konigstiger,
I recently bought a 2014 E350 4matic in October and it has a rubbing/grinding noise that comes from the right front end when I back up, I thought it was a clearance issue with the tires but my husband says the tire isn't touching anything when I turn. It has gradually gotten worse over the past 2 months so I'm not sure what it could be from. Do you have any ideas on what it could be from? Also could you please get the data card from my vin: WDDHF8JB7EA981175.
Thank you sooooooo much!
I recently bought a 2014 E350 4matic in October and it has a rubbing/grinding noise that comes from the right front end when I back up, I thought it was a clearance issue with the tires but my husband says the tire isn't touching anything when I turn. It has gradually gotten worse over the past 2 months so I'm not sure what it could be from. Do you have any ideas on what it could be from? Also could you please get the data card from my vin: WDDHF8JB7EA981175.
Thank you sooooooo much!
#397
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Visual inspection brakes, steering knuckle, axle for grinding noise.
The following users liked this post:
benzeclass (12-26-2018)
#398
Newbie
Thank you so much!!! So it doesn't happen when I press on the brakes at all, its only when I turn a certain way and only in reverse. If there was something wrong with the brakes would it make noise when I pressed them? That may of been a stupid question but I'm clueless lol. I appreciate your help & input very much!!
#399
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Thank you so much!!! So it doesn't happen when I press on the brakes at all, its only when I turn a certain way and only in reverse. If there was something wrong with the brakes would it make noise when I pressed them? That may of been a stupid question but I'm clueless lol. I appreciate your help & input very much!!
#400
Member
Hi Konigstiger, really cool how on top of things you are! May I put in a request for the Data Card for my machine? VIN: WDDLJ9BB5FA156055.
Thank you very much for the courtesy!
Bill
Thank you very much for the courtesy!
Bill