Multicontour Passenger Seat Retrofit?
#1
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Alexandria, VA
Posts: 275
Received 75 Likes
on
52 Posts
2000 E430 Sport
Multicontour Passenger Seat Retrofit?
Has anyone completed (or know of someone who has completed) a multicontour passenger side retrofit on a 2010 W212, which was already equipped with the multicontour drivers side option?
If so, did the retrofit require only the seat and coding or are other parts required (such as additional air compressors, pumps, and lines)?
Its seems this option was available in other countries however Mercedes excluded the US.
As such (theoretically at least) those of us here in the US may be able to retrofit our vehicles to include this option.
There was a post about this a while ago but since then no updates.
If so, did the retrofit require only the seat and coding or are other parts required (such as additional air compressors, pumps, and lines)?
Its seems this option was available in other countries however Mercedes excluded the US.
As such (theoretically at least) those of us here in the US may be able to retrofit our vehicles to include this option.
There was a post about this a while ago but since then no updates.
#2
MBWorld Fanatic!
My '04 E500 had it on both sides, but my 2010 and now 2014 were eliminated on the pass side. My passengers never appreciated it on my '04 so I think MB made the right decision to remove it. I would never spend money to retrofit, but good luck to you in getting it done.
Last edited by KEY08; 09-01-2017 at 10:49 AM.
#3
Member
Weirdly enough, the W213 is back to bilateral multicontour seats.
#4
MBWorld Fanatic!
The following users liked this post:
pierrejoliat (07-25-2020)
#8
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Alexandria, VA
Posts: 275
Received 75 Likes
on
52 Posts
2000 E430 Sport
Update: Dealership states coding is unavailable for this particular project. Might ask around a bit more but at this point the only viable solution is to find someone who both has Mercedes STAR equipment and is willing to allow my contact remote access for the coding. Slim chance at best.
#9
Senior Member
Did you ever make any progress with this project?
So far I haven't been able to find anybody who has fully successfully added an active/dynamic seat.
So far I haven't been able to find anybody who has fully successfully added an active/dynamic seat.