Hi. could you send me the video as well please? I am having the same issue.

 

Morning,
Would there be be any chance you could share your video on how to replace the L shaped pin in the centre console cup holder lid?? Had a face mask caught in it then all of a sudden it wouldn't stay closed.

All the best from Linlithgow in Scotland

 

Hello!

Can any share how to replace the L shaped pin in the centre console cup holder in my Class??? Bloody thing just came out this morning. Any help would be appreciated.

Thanks from Linlithgow

 

Hello did you ever get you centre console l shaped pin fixed? Mine has suddenly appeared in my cup holder and i havent a clue where it goes!! Any help would be much appreciated.

 

Did you ever manage to fix this issue? This little L shaped pin appeared this morning

Any help would be great

 

Nice useful thread. But I was taken with the picture of the IWC face on the clock. What a hoot. The non-AMG models just get a tri-star. The same electric clock. But does this mean Rolex, Patek, Vacheron-Constantin are available. I am just stupid enough to put a Rolex face on. No one would believe Patek, maybe on a Maybach.

 

Would it be possible to share the video to replace the L shape pin in the front tray? Haven't a clue where to begin!

 

Hi I seem to have the same problem do you mind sending me the video please.

 

I haven't checked in on this thread in a while...it kind of reads like a flashmob prank, but I guess this issue is happening to all sorts of owners all of a sudden.

I must confess how I ended up with the loose pin (I didn't want to publicly admit until it was fixed under warranty)...I got a damn facemask string caught back there and so I just tugged on it hard expecting to break the cheap disposable mask string but instead this pin comes flying out with the facemask intact.

I can't promise that I won't do this same thing again, so if anyone received the video from Philip Tang, could you please post it. Or send it to me and I can host it privately on Youtube.

 

if the mask gets stuck, then cut it with some scissors... I imagine that the cost of a facemask is less than the time it takes to completely take the console apart:-)

 

I keep a mask with the loop over the console wheel. It doesn't hamper the control and is available quickly. It won't blow away when all of the windows are down and the sunroof is open - typical in the Florida late autumn/winter/early spring.

 

Could someone clarify for me is the IWC (International Watch Company) face in bO's picture a standard feature on Mercedes-AMG cars or is it an aftermarket item. If it is an aftermarket item are other watch company logos available and if so from whom. Thanks

 

2019 e450 first photo standard part # 2138272000. Shown in b0rderman photo is OE 2138271400 (or dare I say Aliexpress “Red Circle”). EPC shows additional replacements available: third photo AMG IWC 2138271300, fourth photo AMG IWC 2058273500.

 

Isn't that a hoot. I am not a watch aficionado but I recognize a lot of the names. IWC has never been on my radar screen. As I said before I would put on a Rolex face as a bit of humor. Now that the console clock is gone I guess this is a little bit of history.

 

plesse could you send me the video Philip
.. email - mruddiiin@yahoo.co.uk

 

It came standard on my 2020 AMG. I think the licensing agreement ended with the 2021 models, however.

 

IWC was the brand that mercedes works with to give them status(like Bentley uses Breitling)

you can get standard or IWC... both are plastic and similar quality - so its nothing more than putting a brandname on “nothing”

it looks alot better than the standard mercedes star and will go great with your wristwatch IWC if you own one:-)

you cannot get other brandnames and you cannot get it aftermarket. But you can buy it as a retrofit

 

Are you able to share the video of how to replace the pin as the same issue has happened with my car?

 

Thanks Phillip Tang. The video you sent me was easy to apply. Worked like a charm. Thanks !

 

PNC are you able to post the video?

 

 

I’m unable to load the video.

the pic shows the location of the pin

slide the top veneered cover off by pulling towards you while the cover is open. This will expose the area in the image posted. The pin is inserted as shown

 

Hello Philip, can you help send the video to below email? I have the same problem.

rkmilango@gmail.com

 

Hello

I have the same issue in my W176. Can you please share the video on architmakkar@gmail.com. Thanks in advance.

 

Hi Philip

Can you share the video at architmakkar@gmail.com. Would be really helpful.