Mark this thread as Unsold
Code3 Supercharger Pulley for Sale
Thread Starter
MBWorld Fanatic!
Joined: Jul 2007
Posts: 2,000
Likes: 20
From: East Bay, Bay Area
2002 C32, 2012 S550
Code3 Supercharger Pulley for Sale
Hey Guys,
I finally got my LET 185mm Pulley and will be installing it next week. I will be re-installing my stock supercharger pulley and removing my Code3 Supercharger Pulley.
I got it about June last year and and has maybe 10K miles on it. Nothing wrong with it at all, never had any problems with it and it was great fun over stock. However, I got the more power bug and decided to go with a LET 185 for maximum boost.
It was professionally installed and will be professionally removed.
http://www.youtube.com/watch?v=hO9-Zeuotqg
This is from Code3's Website:
PERFORMANCE SUPERCHARGER PULLEY
- 10-15 minute install
- no new belt needed
- no additional pulleys needed
- no ECU tuning needed
- operates EXACTLY like your stock pulley
- pulley comes with new bearing and snap ring pre-installed, plus extra spacers
- Makes the same power as a 178mm crank pulley. Bolt on our new Performance Intake for even more power!
+21rwhp/27rwtq Peak ~ +25.6rwhp/30.4rwtq Curve
http://shop.code3performance.com/product.sc?categoryId=3&productId=4
BTW, these are currently on BACKORDER at Code3, so it's not easy to get them right now. Taking offers, but would like at least $450. This will include shipping to anywhere in the mainland U.S.
I finally got my LET 185mm Pulley and will be installing it next week. I will be re-installing my stock supercharger pulley and removing my Code3 Supercharger Pulley.
I got it about June last year and and has maybe 10K miles on it. Nothing wrong with it at all, never had any problems with it and it was great fun over stock. However, I got the more power bug and decided to go with a LET 185 for maximum boost.
It was professionally installed and will be professionally removed.
http://www.youtube.com/watch?v=hO9-Zeuotqg
This is from Code3's Website:
PERFORMANCE SUPERCHARGER PULLEY
- 10-15 minute install
- no new belt needed
- no additional pulleys needed
- no ECU tuning needed
- operates EXACTLY like your stock pulley
- pulley comes with new bearing and snap ring pre-installed, plus extra spacers
- Makes the same power as a 178mm crank pulley. Bolt on our new Performance Intake for even more power!
+21rwhp/27rwtq Peak ~ +25.6rwhp/30.4rwtq Curve
http://shop.code3performance.com/product.sc?categoryId=3&productId=4
BTW, these are currently on BACKORDER at Code3, so it's not easy to get them right now. Taking offers, but would like at least $450. This will include shipping to anywhere in the mainland U.S.
Last edited by Gramma_Benz; Jan 31, 2009 at 07:42 PM.
MBWorld Fanatic!
Joined: Jul 2004
Posts: 1,276
Likes: 5
From: California
2018 E63S AMG, 2003 SLK 230 Sport, 2004 SL 600, 2006 SLK 55 AMG, 1998 E320 Wagon
So just to make sure, this is the 'newer' Code 3 pulley, right? As in, the new one they're talking about on the paragraph you put in?
Last edited by Koru_Kinshi; Jan 31, 2009 at 03:16 PM. Reason: Additional information to post.
Thread Starter
MBWorld Fanatic!
Joined: Jul 2007
Posts: 2,000
Likes: 20
From: East Bay, Bay Area
2002 C32, 2012 S550
Senior Member
Joined: Sep 2008
Posts: 437
Likes: 0
From: Rocklin, CA
2003 SL55, 2006 CLK500, 1998 Vette
Would this work on a 2003 sl55? Would this cause any other problems with the increased power? Are the power increases accurate? Can you prove them (dyno sheets, etc)? I am interested if it works on my car.
MBWorld Fanatic!
Joined: Oct 2006
Posts: 4,856
Likes: 4
02 C32 AMG
Thread Starter
MBWorld Fanatic!
Joined: Jul 2007
Posts: 2,000
Likes: 20
From: East Bay, Bay Area
2002 C32, 2012 S550
Yeah, I'm pretty sure it will NOT work on your car. I think your engine is the same as the E55? If it fit, I'm sure they would market it as so.
Trending Topics
MBWorld Fanatic!
Joined: Jul 2004
Posts: 1,276
Likes: 5
From: California
2018 E63S AMG, 2003 SLK 230 Sport, 2004 SL 600, 2006 SLK 55 AMG, 1998 E320 Wagon
I'm thinking about it, but....I'm thinking first I should invest on better air delivery and/or lowering IATs through a better heat exchanger.
Decisions are always tough. :/
Decisions are always tough. :/
MB World Stories
The Best of Mercedes & AMG
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
Thread Starter
MBWorld Fanatic!
Joined: Jul 2007
Posts: 2,000
Likes: 20
From: East Bay, Bay Area
2002 C32, 2012 S550
P.S. I may also have my Code3 intake for sale along with the pulley soon. I just got an SL55 intake setup that I need to install. it will be sad to give it up as I love the SC whine and loud sucking noise that accompanies it.
MBWorld Fanatic!
Joined: Jul 2004
Posts: 1,276
Likes: 5
From: California
2018 E63S AMG, 2003 SLK 230 Sport, 2004 SL 600, 2006 SLK 55 AMG, 1998 E320 Wagon
Yeah, the sound is sick. But in truth the SL 55 intake is the wiser option. And it'll still sound burly. Just not like a banshee out of hell. 
