Mark this thread as Unsold
80mm tb, 178mm pulley, almost new f/r rotors
#1
MBWorld Fanatic!
Thread Starter
80mm tb, 178mm pulley, almost new f/r rotors
gotta move some stuff so make me an offer via pm if you're interested. all items are used and in working order.
1. vrp 80mm tb
2. asp 178mm pulley
3. zimmerman front rotors with akebono pads, oem rear rotors with oem pads (used for 2000miles)
1. vrp 80mm tb
2. asp 178mm pulley
3. zimmerman front rotors with akebono pads, oem rear rotors with oem pads (used for 2000miles)
#3
MBWorld Fanatic!
Thread Starter
ok, so hardly anyone wants to make an offer but i'm getting inundated with pm's wanting to know my asking prices...
so here goes:
1. 80mm tb: $750
2. 178mm pulley: $300
3. complete rotor/pad kit: $500
all items do not include shipping and paypal is strongly preferred.
so here goes:
1. 80mm tb: $750
2. 178mm pulley: $300
3. complete rotor/pad kit: $500
all items do not include shipping and paypal is strongly preferred.
#5
Member
Join Date: Jun 2009
Location: Stratford,Ct
Posts: 164
Likes: 0
Received 2 Likes
on
2 Posts
2005 E55 AMG
ok, so hardly anyone wants to make an offer but i'm getting inundated with pm's wanting to know my asking prices...
so here goes:
1. 80mm tb: $750
2. 178mm pulley: $300
3. complete rotor/pad kit: $500
all items do not include shipping and paypal is strongly preferred.
so here goes:
1. 80mm tb: $750
2. 178mm pulley: $300
3. complete rotor/pad kit: $500
all items do not include shipping and paypal is strongly preferred.
IE... Bolts,other pulleys that are required,etc...
#7
MBWorld Fanatic!
Thread Starter
i used the jaguar belt but yes, gates also makes a readily available belt (which isn't included). actually i believe i have a used jag and gates belt that i can include but i'd highly recommend a new one. you will also need a new crank bolt from the dealer which should be under $20 unless they've gone up since i purchased last. this pulley DOES included the smaller water pump pulley.
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
#10
Member
Join Date: Jun 2009
Location: Stratford,Ct
Posts: 164
Likes: 0
Received 2 Likes
on
2 Posts
2005 E55 AMG
i used the jaguar belt but yes, gates also makes a readily available belt (which isn't included). actually i believe i have a used jag and gates belt that i can include but i'd highly recommend a new one. you will also need a new crank bolt from the dealer which should be under $20 unless they've gone up since i purchased last. this pulley DOES included the smaller water pump pulley.
#12
MBWorld Fanatic!
Thread Starter
i was afraid to go with some of the huge pulley sizes that people are talking about now, even with my extensive cooling set up. i went with a 180 and while there are other variables involved, i honestly can't say that it shown any measurable hp gains over the 178 on the dyno.
#13
Super Member
Join Date: Sep 2002
Location: La Quinta, CALIF.
Posts: 820
Likes: 0
Received 1 Like
on
1 Post
2009 C63 Black on Black
Hey Mikey!
i was afraid to go with some of the huge pulley sizes that people are talking about now, even with my extensive cooling set up. i went with a 180 and while there are other variables involved, i honestly can't say that it shown any measurable hp gains over the 178 on the dyno.
Are you selling the E55?
Phil
#18
MBWorld Fanatic!
i was afraid to go with some of the huge pulley sizes that people are talking about now, even with my extensive cooling set up. i went with a 180 and while there are other variables involved, i honestly can't say that it shown any measurable hp gains over the 178 on the dyno.
do u think a 190mm pulley is overkill?
i wish i saw this earlier, i would have got your brakes! unfortunately i ordered new brakes last week. i still have to find some akebono pads though. do u know where i can get some?
anyways bump for a good guy and a good seller!
#20
MBWorld Fanatic!
Thread Starter
$650 is the best offer i've got on the tb as of right now. if no one steps up to my asking price it will go to this offer by the end of the weekend.
and i will split the brakes up since people have asked.
thanks guys!
and i will split the brakes up since people have asked.
thanks guys!
#22
MBWorld Fanatic!
Thread Starter
#24
Senior Member
Join Date: Apr 2009
Location: Salt Lake City, UT
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
2002 BMW M5, 1992 AWD DSM, 1988 Yamaha FZR1000
Interesting... do you have any idea what the tunes cost for a 178mm pulley? Does ASP or any of the other tuners sell them? I wonder if Vadim's tune for 175 would work for this. I'd jump on it if I could find a good tune.
#25
MBWorld Fanatic!
Thread Starter
tuning will cost roughly around a grand. if a pulley is all you're doing for now you won't need a custom tune and any tuner should be able to do that for you. i happen to prefer renntech...