EQE (V295) Sedan Upcoming

Parts Peeling Off Car's Underside

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 07-04-2023, 02:26 PM
  #1  
Senior Member
Thread Starter
 
saintvir's Avatar
 
Join Date: Nov 2002
Location: Fort Myers, FL
Posts: 277
Received 12 Likes on 9 Posts
'23 EQE 350 4MATIC
Parts Peeling Off Car's Underside

Approaching the passenger side of the car, I noticed yellow tape underneath the car. Went down on my knees to take a look. Here is what I saw:



The piece of yellow tape appears to be what should hold the plastic part to the car's underbody. I took another look when I got home and noticed the same thing is happening on the driver's side.



This part is farther back (under the left passenger door). I have made an appointment with a local dealer to have it looked at and/or fixed.

Has anybody seen anything like this before?

Old 07-04-2023, 02:48 PM
  #2  
MBWorld Fanatic!
 
Eaton's Avatar
 
Join Date: Feb 2019
Location: USA
Posts: 1,846
Received 984 Likes on 578 Posts
N/A
Hm I wonder if it's this. It's an exclusive thing to the EV models.


The following 2 users liked this post by Eaton:
bollar (07-07-2023), icwhatudidthere (07-05-2023)
Old 07-04-2023, 03:13 PM
  #3  
Senior Member
Thread Starter
 
saintvir's Avatar
 
Join Date: Nov 2002
Location: Fort Myers, FL
Posts: 277
Received 12 Likes on 9 Posts
'23 EQE 350 4MATIC
Thanks for replying so quickly.

Does that mean I should just take them off? It sure looks like these guys are ready to come off!

If you don't mind, where did you get that info?

_____________________________________________
UPDATE: I was getting antsy about it ... so I took them off!!! They are indeed temporary. Here's what they look like.





They were protective covers for slotted sections that run along the outer edge of the underbody panels.



Last edited by saintvir; 07-04-2023 at 08:32 PM. Reason: Updated status
The following users liked this post:
icwhatudidthere (07-05-2023)
Old 07-05-2023, 06:47 AM
  #4  
Member
 
icwhatudidthere's Avatar
 
Join Date: Oct 2013
Location: NJ
Posts: 167
Received 47 Likes on 33 Posts
EQE 500
Thanks for posting, I noticed this on mine also just yesterday.
Old 07-05-2023, 02:52 PM
  #5  
Senior Member
Thread Starter
 
saintvir's Avatar
 
Join Date: Nov 2002
Location: Fort Myers, FL
Posts: 277
Received 12 Likes on 9 Posts
'23 EQE 350 4MATIC
@EATON Thanks for providing the clue as to what they are … The two plastic strips covered a series of bolts on either side of the panel. I guess those bolts are quite important that they needed to be protected during transport.
Old 07-05-2023, 10:25 PM
  #6  
Out Of Control!!

 
chassis's Avatar
 
Join Date: Sep 2018
Location: unbegrenzt
Posts: 13,340
Received 3,931 Likes on 3,095 Posts
2017 GLE350 4MATIC
This is the general area where the battery pack is fastened to the frame structure (chassis) of the vehicle. Photos of the bolts behind the protective covers would be helpful and interesting to see.
Old 07-06-2023, 07:16 PM
  #7  
Senior Member
Thread Starter
 
saintvir's Avatar
 
Join Date: Nov 2002
Location: Fort Myers, FL
Posts: 277
Received 12 Likes on 9 Posts
'23 EQE 350 4MATIC
These are the best I could do (Car is not on a lift). Had to lie on my back and find the bolt by touch. I found/felt 5 of these guys:



At both ends of the row of 5 bolts, there is "hole" (see pic)


Looks like you could stick a Torx head in there ... but I really have no idea.

The following users liked this post:
chassis (07-06-2023)
Old 07-06-2023, 08:12 PM
  #8  
MBWorld Fanatic!
 
Mort's Avatar
 
Join Date: Feb 2010
Posts: 5,508
Received 432 Likes on 355 Posts
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
That "hole" looks like a jack point to me.
The following users liked this post:
saintvir (07-07-2023)
Old 07-06-2023, 08:51 PM
  #9  
Out Of Control!!

 
chassis's Avatar
 
Join Date: Sep 2018
Location: unbegrenzt
Posts: 13,340
Received 3,931 Likes on 3,095 Posts
2017 GLE350 4MATIC
Agree, the hole looks like a jack/lift point. The other screw doesn't look heavy enough to be a battery-to-chassis bolt, possibly simply holding the corrugated protective underbody shield in place.
The following users liked this post:
saintvir (07-07-2023)
Old 07-07-2023, 07:33 AM
  #10  
Senior Member
Thread Starter
 
saintvir's Avatar
 
Join Date: Nov 2002
Location: Fort Myers, FL
Posts: 277
Received 12 Likes on 9 Posts
'23 EQE 350 4MATIC
I learned something new today … There’s certainly a lot to learn about this car.
Old 03-04-2024, 03:40 AM
  #11  
Newbie
 
nikichen's Avatar
 
Join Date: Mar 2024
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
EQE350
I have the same issue and it freaked me out yesterday. I first heard a strange noise while driving, like something was stuck underneath the car and was dragging the ground. it became more noticeable when driving slow. Then my neighbor noticed I have something dragging underneath my car so I pulled a strip-like part off it came out bent. Then I noticed the yellow duck tape sticking out so I reached under and peeled it off.
to the original post: did you get it fixed? Mine came off on the passenger side.

, the driver side seems intact so I am taking the car in tomorrow. My car is brand new - 2 months with 2k miles.
​​​​​​
Old 03-04-2024, 10:27 AM
  #12  
MBWorld Fanatic!
 
teksurv's Avatar
 
Join Date: Apr 2007
Location: San Diego, CA
Posts: 1,402
Received 399 Likes on 298 Posts
EQ
Same happened to me, took them off and all is well.
Old 03-07-2024, 10:26 AM
  #13  
Senior Member
 
giovane's Avatar
 
Join Date: Jun 2022
Location: Houston TX
Posts: 455
Received 99 Likes on 73 Posts
2023 C Class
It looks like a quick fix for flawed design.
Wonder if the 2024 model has the same covers or something different.

edit: I didn't read Eaton's post correctly. I agree those are for transport, most likely the VPC forgot to remove them.

Last edited by giovane; 03-07-2024 at 10:33 AM.
Old 03-07-2024, 03:19 PM
  #14  
Senior Member
 
ScottC2's Avatar
 
Join Date: Dec 2022
Location: Sweden
Posts: 361
Received 100 Likes on 75 Posts
EQE SUV 500 4Matic
Originally Posted by saintvir
I learned something new today … There’s certainly a lot to learn about this car.
That's one of my beefs about the EQ's. There are SO MANY features, configurable in SO MANY ways that I find myself having difficulty remembering all the things the car can do, let alone how to use the feature I may remember ;-)
Old 03-15-2024, 12:05 PM
  #15  
Senior Member
Thread Starter
 
saintvir's Avatar
 
Join Date: Nov 2002
Location: Fort Myers, FL
Posts: 277
Received 12 Likes on 9 Posts
'23 EQE 350 4MATIC
“to the original post: did you get it fixed? Mine came off on the passenger side.”

Replying to nikichen: - nothing to fix; they’re non-functional after delivery… I just removed both strips and tossed them.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Parts Peeling Off Car's Underside



All times are GMT -4. The time now is 01:58 AM.