2002 G500 build/ restoration/ conversion photo thread
#701
Newbie
Join Date: Apr 2017
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
09 GL450 | 90 300 SEL | 87 300 SDL | 12 RR Big Body | 99 LX470 | 09 A8L | 07 XC70
Oh okay that's perfect! I might try and source mood lighting from eBay and then wire it up from the glove box as well, at night it just gets stupidly dark and you can't even see the door handles.
Btw, did you figure out what you were going to do for the Center dash? I bought the wood trims and the climate control, still have to source the hazard panel from a W463 and have to figure out which android unit I will settle for.
Btw, did you figure out what you were going to do for the Center dash? I bought the wood trims and the climate control, still have to source the hazard panel from a W463 and have to figure out which android unit I will settle for.
#703
Oh okay that's perfect! I might try and source mood lighting from eBay and then wire it up from the glove box as well, at night it just gets stupidly dark and you can't even see the door handles.
Btw, did you figure out what you were going to do for the Center dash? I bought the wood trims and the climate control, still have to source the hazard panel from a W463 and have to figure out which android unit I will settle for.
Btw, did you figure out what you were going to do for the Center dash? I bought the wood trims and the climate control, still have to source the hazard panel from a W463 and have to figure out which android unit I will settle for.
The right hazard panel should be the code A4639050000 but new one is quite pricey and used is rare to find.
So I had the idea to use the A2038700251 which is only missing the rear wiper switches and solve this problem installing the ML Class rear wiper switch (such as 1638200310) in the third empty space of the center console (the one for Heater booster system present only on vehicles fitted with a diesel engine).
#704
MBWorld Fanatic!
Thread Starter
I purchased W203 wood trim, it has different brackets on the top, ill see if I can make it work.
Yes, the w463 hazard panel a rare and pricy... i found one in Germany a while back and grabbed it right away.
Yes, the w463 hazard panel a rare and pricy... i found one in Germany a while back and grabbed it right away.
#705
Newbie
Join Date: Apr 2017
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
09 GL450 | 90 300 SEL | 87 300 SDL | 12 RR Big Body | 99 LX470 | 09 A8L | 07 XC70
Which trim did you buy? W463 one or W203 one?
The right hazard panel should be the code A4639050000 but new one is quite pricey and used is rare to find.
So I had the idea to use the A2038700251 which is only missing the rear wiper switches and solve this problem installing the ML Class rear wiper switch (such as 1638200310) in the third empty space of the center console (the one for Heater booster system present only on vehicles fitted with a diesel engine).
The right hazard panel should be the code A4639050000 but new one is quite pricey and used is rare to find.
So I had the idea to use the A2038700251 which is only missing the rear wiper switches and solve this problem installing the ML Class rear wiper switch (such as 1638200310) in the third empty space of the center console (the one for Heater booster system present only on vehicles fitted with a diesel engine).
#710
MBWorld Fanatic!
Thread Starter
Picked up the seats today. They look amazing! ))
installed headrests on the front seats and new seatbelt buckles.
#711
#713
#714
Super Member
Join Date: Feb 2015
Location: Cape Cod
Posts: 941
Received 305 Likes
on
231 Posts
E450 wagon, C43 AMG Cpe, C43 AMG Cab
WOW!!!! Those seats look fantastic......Getting close man......can't wait to see the final product. You've done an amazing job on this build. Best of luck in the "home stretch".
The following users liked this post:
Kobzarhomes (04-10-2018)
#717
MBWorld Fanatic!
Thread Starter
Thank you
It all depends.
I provided the leather to the upholstery guy, he charged me only labor.
I dont recall how much, I have not paid him yet, still waiting for the dash to be completed.... I want to say it was approximately $2,500 for just labor on the seats.
It all depends.
I provided the leather to the upholstery guy, he charged me only labor.
I dont recall how much, I have not paid him yet, still waiting for the dash to be completed.... I want to say it was approximately $2,500 for just labor on the seats.
#718
@kobzarhomes Looks like your project is coming along great. I have a question for you, do you mind sharing how to wired you mirrors and headlight cover with leds?
Thanks again...
Thanks again...
#719
MBWorld Fanatic!
Thread Starter
Figuring out the mirror was a bit challenging. First I had to figure out which wires do what.
Then its just wiring those wires to the correct power source (turn signal, puddle light, blind spot). Im not going to bother with the folding option.
Then there is the plug, which just plugs in to the plug that comes with the car. I think it mostly does the work of moving the mirror around.
DRL in the headlight surround... I purchased DRL module on Ebay and wired it to the power source that I found in the fuse box, that comes on with a turn of the ignition. The rest was pretty simple. The DRL module comes with some simple instructions as well.
Then its just wiring those wires to the correct power source (turn signal, puddle light, blind spot). Im not going to bother with the folding option.
Then there is the plug, which just plugs in to the plug that comes with the car. I think it mostly does the work of moving the mirror around.
DRL in the headlight surround... I purchased DRL module on Ebay and wired it to the power source that I found in the fuse box, that comes on with a turn of the ignition. The rest was pretty simple. The DRL module comes with some simple instructions as well.
Last edited by Kobzarhomes; 04-12-2018 at 11:33 AM.
#721
Newbie
Join Date: Oct 2017
Location: Houston, texas
Posts: 13
Received 0 Likes
on
0 Posts
2003 G500, 2006 SL500, 2014 C250, 2015 ML350, 1990 190e 2.6
I see you got the wood off the dash grab handle. I'm redoing my interior wood trim in carbon fiber and I've been trying to find how to remove that wood panel. could you let me know how you did it and did you have to remove the handle first? Also, your seats look outstanding, the stitching and color are amazing, something I may have to do my car later!
#722
MBWorld Fanatic!
Thread Starter
Thank you
The wood on the grab handle actually just comes out. You might have to use some plastic prying tools to wiggle it out, but it is just pushed in to 2 holes with some glue in them.
The wood on the grab handle actually just comes out. You might have to use some plastic prying tools to wiggle it out, but it is just pushed in to 2 holes with some glue in them.
#723
MBWorld Fanatic!
Thread Starter
First time doing a headliner. First time working with Alcantara.
Took me seven hours...
Was not easy, but almost finished ))
Took me seven hours...
Was not easy, but almost finished ))