Brake calipers rusted on 2012 CPO




They will not replace that easily unless something is terribly wrong with them. Rusting is common and if the wheels are not cleaned regularly the brake dust eats through the finish. You can always try using brake cleaner and a brush to see if the rust goes away.
They will not replace that easily unless something is terribly wrong with them. Rusting is common and if the wheels are not cleaned regularly the brake dust eats through the finish. You can always try using brake cleaner and a brush to see if the rust goes away.









It is easy to do if you have tools and basic mechanical skills. Only odd tool you will need is an 11mm hex bit similar to this:
Here is a post with a video that shows how to replace the front brake pads a rotors. (Haven't watched the entire video for correct procedures but I am sure it will give you some idea on what is involved
) How To Replace Front Brakes - PostGood luck
Trending Topics




The Best of Mercedes & AMG




I have used their rotors in the past when I used to drive Corvettes and they seem to hold up well for cheap rotors. This set that I got were not machined and zinc plated as well as they used to be in the past so I don't think I would go with them again. Stoptech finally makes premium drilled rotors for the ML so I would probably buy them and have them zinc plated locally.
Last edited by JRHolt; May 18, 2015 at 08:27 AM.


