benzpimp

I recently bought an illuminated emblem from a aftermarket companyand replaced it with the factory non-illuminated emblem but I do not know whereto tab the wire for the power source. I would like to use the fuse box that isunder the hood but do not know which fuse number to tab it into. I haveattached the diagrams of my fuse boxes. The car that I am speaking about is a 2014 ML-350. Any help would be appreciated.

Rainers

Here is how I setup my 2014 ML350. Works with unlock and when opening door and driving

benzpimp

How did you tap that in with a mini fuse tap and what amp did you use?

Rainers

The one I bought had a inline fuse so my connection is just straight in the port using a connector

Jenge

Any idea what amp is in your in line fuse.
your photo helped a lot but am afraid to direct wire it in to the fuse box without a fuse. Thanks very much.

peter2772000

I'm sure a 5 amp would be more than enough. That thing prolly pulls no more than an amp or so

Jenge

Which wire is hot and which one is the ground wire? Thanks

ParrishR10

Hi,

I connected mine in the fuse box in the same circuit. But when my GLE is off, that circuit keeps turning off and on constantly. Anyone run into this?

Ray4dan

When I connected my star to the fuse box I used #23 fuse location. My star did the same thing for a few minustes after exiting the car and locking or leaving it unlocked. Why it came on again and then off, I don't know.It finally stopped cycling through this after a few times. So far I have just left it hooked to #23.
Mine is on a 2014 MB E350.