When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm trying to bag my car and the set up are expensive i just bough my e500 and the previous owner just instal all the air shocks on the car is there anyway that I can use the oem air shocks to lower and raise my car by just buying the silinoids and air tank can anyone help me out and I think my compressor just went out too. Or is there a post that someone did this already let me know
Theres a method to lower both the front and back of our w211's via washer method. Saves a ton of money and no need to change any airmatic parts. Google W211 lowering washer method. You should find some images posted by users who did this. I did to my front just to give it more of a lower stance in front. But not by much.
You can also just purchase lowering links. They attach to the level sensors that are bolted with one 10mm bolt on your upper control arms. They just use a longer arm link to trick the car into thinking its higher off the ground.
You can get aftermarket shocks to replace the current air struts. Otherwise if your compressor is just out, that would be much cheaper to just replace the compressor.
How low are you trying to get the car? Just fix the compressor and get a lowering module unless you're trying to go super low. Another option is to remove the whole airmatic system and install coil overs.
You should also be asking your questions in the W211 section. The New Members section isn't really the place to ask this type of stuff since it doesn't get a ton of traffic.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
