Seerq

Hello, i have a problem with my w221 s320 cdi om642 2009. When i turn it on D or R a huge vibration starts. I replaced all engine mounts and lockup valve but it didn't change anything. When I'm driving and stop, the vibrations disappear, but when I move a little they appear again, On park or neutral is ok. My idle speed is 750rpm, isn't that too much? I have DPF disabled but I uploaded the original file and it's still the same.The timing chain was replaced, the swirl flaps were clean, and the egr too. Is it possible that the torque converter is damaged? I have no idea what I can do, please help..

cruiser02

Sounds like transmission mounts need to be changed. I would start there.

Seerq

I have already replaced the gearbox mounting and installed LEMFÖRDER

BOTUS

high mileage - self destructed TC lock up clutch - what do you mean by valve ? - the inside of the torque converter destroys itself and the box has to come out for a new TC

Seerq

The car's mileage is 260,000km. TC do you mean torque converter?

BOTUS

that's what it says in post #4

BOTUS

check this one

https://mbworld.org/forums/s-class-w...ml#post8974367

Seerq

I think I need to look for a new tc. Has anyone installed Sachs 0700600039?