no 12v socket in armrest - surprised - can we add one? anyone add qi charger?
my S550 has something weird - a little cell phone holder (good luck holding my samsung s8+!) - when i removed it with a little elbow grease there was a nice hole behind it - i guess an access panel to do what you have to do.
i was really surprised there was no 12v socket in there (my BMW has one) - i know there's the ashtray (my BMW has another 12v in the cup holder). i'd rather not have a charger sticking out for my phone - i'm toying with the idea of buying a $30 or so qi charging pad for my phone (like the newer S's have, but not exactly). i will say, i had a charge and media cradle in my BMW, and would keep forgetting my phone in the armrest - so i'm really on the fence.
the samsung can take a fast charge, with an appropriate car charger - if i just use the USB (i am for now, i routed the cord out of the armrest) i can charge it, but not quickly. one thing i really like about qi is that there's NO wear and tear on the charging jack.
Anyway, any advice or suggestions appreciated!




https://youtu.be/mdKmzxopgQc
ALMOST wish no cd changer - finicky, and takes up room where we could otherwise slide the charger if not mounted. Maybe instead of tape use black weak Velcro (versus the super strong plastic type)
Trending Topics
looks awesome, and cute pic of kid. Was going to ask you about the all important cup holders but you showed still work. I ordered a thicker pad yesterday with the intent of using in the armrest - maybe I’ll buy a thin one and do what you did. I’d prefer not to use the console, I’d Forget my phone inside.
ALMOST wish no cd changer - finicky, and takes up room where we could otherwise slide the charger if not mounted. Maybe instead of tape use black weak Velcro (versus the super strong plastic type)
Here’s a link to remove ashtray:
The video mentions two clips to remove the wood cover... it took me a while to figure that out but hopefully this helps explain it a little better:
The Best of Mercedes & AMG
is your qi charger particularly thin? Amazon and eBay have a ton, my older Samsung slow is shiny/slippery, so I want something thin that has some grip on both sides. Any recommendations? Thnaks!
is your qi charger particularly thin? Amazon and eBay have a ton, my older Samsung slow is shiny/slippery, so I want something thin that has some grip on both sides. Any recommendations? Thnaks!
Link below for the charger that I bought:
Thanks! The cup holders are definitely important and I knew the armrest wouldn’t work for the same reason you mentioned... I’d forget my phone! The way I did it still allows me to use the cigarette lighter to plug in usb chargers for things like my iPad or if someone needs a charge without a wireless charging phone. I did not have to modify or break anything to run/hide the wire but you have to remove the wood cover and ashtray in order to hide the wire. Once you figure that out it’s easy....
Here’s a link to remove ashtray:
https://youtu.be/NeY4kXJTmkI
The video mentions two clips to remove the wood cover... it took me a while to figure that out but hopefully this helps explain it a little better:
Ive had a terrible cold for three days otherwise I would shoot a quick video.
Ive had a terrible cold for three days otherwise I would shoot a quick video.
i bought multiple cables to run; the space is small, that’s only 1 cable for me. The charging pad (thinnest I could find, I think the same as matt’s) supports fast charging but unfortunately has the connector attached. As in, damage that wire and throw out the charger.
i had to route the wire so it wouldn’t rub, not sure I did it well. I may go back and file some grooves into the ashtray areas for the cable or even more cables.
Another bummer - my Samsung fast charger is waaaaay too big, I’ll look at matt’s Video again and seek a mini fast charger, or else a mini regular charger. Still, cup holder works, and I didn’t break the wood trim, so success. I will say, I’m not even sure it is real wood, there was plastic underneath. That was a little disappointing.
i’ll attempt to post photos in case this helps anyone.
Mostly finished, maybe undo and tuck wire better
Wood? Looks like plastic
Routing wire under metal ashtray part to avoid kinking, I hope
Wood removed, route the wire. Notice plastic tabs
Samsung charger is huge. Too huge, can’t close
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
did you file anything or make tiny grooves for the wire? It feels very thin and flimsy. I like how thin the pad is. Deciding whether to use double sided tape or weak Velcro. I think tape to make it more permanent, no easy way to remove without removing the wood or ashtray.
still amazed no 12v outlet in armrest, I may have one installed there, maybe in the middle of that plastic small cell phone holder.
AUKEY Car Charger, Flush Fit Quick Charge 3.0 Port for Samsung Galaxy Note8 / S8 / S8+, LG G6 / V20, HTC 10 and More https://www.amazon.com/dp/B01KZHKF4I/ref=cm_sw_r_cp_apa_gsDUAbCNWJ9S1



https://youtu.be/mdKmzxopgQc



