SL55/63/65/R230 AMG: 3rd brake light p/n....
Trending Topics
The Best of Mercedes & AMG
1. Open trunk, remove the sill plate rivets, sill plate and pull the liner loose close trunk.
2. Open top to get lid open from the front, (leave top down), remove the two plastic rivets (under the flap that is now open). pop the rest of the clips loose and remove the liner, close top.
3. Open trunk and remove two Torq screws from flap motor and swing down.
4. Remove the two 10mm nuts on the lamp retainer, dont drop the nuts into the lid shell.
5. Push out on the lamp while cutting the sealant around the lamp and pull lamp away fron lid, remove connector when lamp assy free.
6. Clean old sealant from lid, I used (Acrylic enamel reducer because it was handy)
7. Fit connector and install new lamp assy in trunk lid, align retainer and push onto lamp, tighten the two 10mm nuts, reinstall flap motor and test light. Close trunk.
8. Open top and reinstall liner then close top, open trunk finish clipping the liner and reinstall sill plate.
9. Done, my time was about 30 min.
Now go wow your friends with your 09 SL63 rear light!
Hmmm, you got me thinking...maybe I should take the car apart, take pictures and put it all on a DVD. Oh, I remember now, it's already on the digital manual for $6 on Egay ;-)



