SL55/63/65/R230 AMG: DIY for removing center console - R230
Thread Starter
Junior Member
Joined: Dec 2011
Posts: 39
Likes: 1
From: Alexandria, Virginia USA
2003 SL55 AMG
DIY for removing center console - R230
Is there a DIY somewhere for removing the center console on an R230?
My 2003 SL55 has the dreaded "stuck in park" problem. I need to remove the center console so I can remove the shifter and fix the problem. All the discussions I found talk about what to do when you get the shifter out, but there's nothing on removing the console.
Thanks.
My 2003 SL55 has the dreaded "stuck in park" problem. I need to remove the center console so I can remove the shifter and fix the problem. All the discussions I found talk about what to do when you get the shifter out, but there's nothing on removing the console.
Thanks.
Thread Starter
Junior Member
Joined: Dec 2011
Posts: 39
Likes: 1
From: Alexandria, Virginia USA
2003 SL55 AMG
After more digging, I found these:
http://www.mercupgrades.com/Removing...rticle-68.html
https://mbworld.org/forums/sl55-amg-...ior-trims.html
Now I'm just left with the problem of how to remove the console when I'm unable to move the shifter out of park. But now that I understand how to remove the console, the other discussions will hopefully make more sense.
http://www.mercupgrades.com/Removing...rticle-68.html
https://mbworld.org/forums/sl55-amg-...ior-trims.html
Now I'm just left with the problem of how to remove the console when I'm unable to move the shifter out of park. But now that I understand how to remove the console, the other discussions will hopefully make more sense.
Junior Member
Joined: Apr 2012
Posts: 33
Likes: 0
SL55
Ok here's what I did. take shift knob off, slide a metal jack handle over shifter rod and proceed to jerk it toward the rear of the car while depressing the brake pedal. It may take 5 or 10 times. I then ordered the aluminum shift lock mechanism to replace the plastic OEM. You can't hurt anything because the dealer is going to replace the whole shifter console after cutting off the shifter rod to get the center console removed. Good luck and have fun!
Thread Starter
Junior Member
Joined: Dec 2011
Posts: 39
Likes: 1
From: Alexandria, Virginia USA
2003 SL55 AMG
Got the console off
The trick is that you can't remove the center wood console panel without first putting the car in neutral. So here's the trick that worked for me to move the car out of park (saw it in somebody else's post - credit goes to them).
1) Remove side panels from console.
2) Remove six screws that hold center wood panel in place.
3) Remove as many as possible of the three hex bolts that hold the shifter to the floor.
4) Put a helper in the driver seat with engine running, foot on brake, pulling back gently on shift lever.
5) Tap on the right (passenger) side of the shifter assembly using a steel rod (1/4" diameter, 8" long) and a medium ball peen hammer. After 8-10 stout taps, the shifter went into neutral.
6) Once the shifter is in neutral, it's easy to remove the center console panel. Then you can finish removing the bolts that hold the shifter to the floor.
Next step, which I haven't figured out yet: Disconnect the shift linkage and remove the shifter.
1) Remove side panels from console.
2) Remove six screws that hold center wood panel in place.
3) Remove as many as possible of the three hex bolts that hold the shifter to the floor.
4) Put a helper in the driver seat with engine running, foot on brake, pulling back gently on shift lever.
5) Tap on the right (passenger) side of the shifter assembly using a steel rod (1/4" diameter, 8" long) and a medium ball peen hammer. After 8-10 stout taps, the shifter went into neutral.
6) Once the shifter is in neutral, it's easy to remove the center console panel. Then you can finish removing the bolts that hold the shifter to the floor.
Next step, which I haven't figured out yet: Disconnect the shift linkage and remove the shifter.
Last edited by Upshift; Sep 29, 2013 at 06:56 AM.
Super Member
Joined: Jan 2012
Posts: 883
Likes: 24
From: Finland
SL600 / SL450 (107) / E350 / BMW M5 E60 / BMW 745i (E23) / BMW X6M / Toyota Hilux 4 WD/ Honda CBX 10
The trick is that you can't remove the center wood console panel without first putting the car in neutral. So here's the trick that worked for me to move the car out of park (saw it in somebody else's post - credit goes to them).
1) Remove side panels from console.
2) Remove six screws that hold center wood panel in place.
3) Remove as many as possible of the three hex bolts that hold the shifter to the floor.
4) Put a helper in the driver seat with engine running, foot on brake, pulling back gently on shift lever.
5) Tap on the right (passenger) side of the shifter assembly using a steel rod (1/4" diameter, 8" long) and a medium ball peen hammer. After 8-10 stout taps, the shifter went into neutral.
6) Once the shifter is in neutral, it's easy to remove the center console panel. Then you can finish removing the bolts that hold the shifter to the floor.
Next step, which I haven't figured out yet: Disconnect the shift linkage and remove the shifter.
1) Remove side panels from console.
2) Remove six screws that hold center wood panel in place.
3) Remove as many as possible of the three hex bolts that hold the shifter to the floor.
4) Put a helper in the driver seat with engine running, foot on brake, pulling back gently on shift lever.
5) Tap on the right (passenger) side of the shifter assembly using a steel rod (1/4" diameter, 8" long) and a medium ball peen hammer. After 8-10 stout taps, the shifter went into neutral.
6) Once the shifter is in neutral, it's easy to remove the center console panel. Then you can finish removing the bolts that hold the shifter to the floor.
Next step, which I haven't figured out yet: Disconnect the shift linkage and remove the shifter.
I have same problem at my car now SL600 .... and I think I must buy a new shifter.
I have keyless go also.....
Mercedes told me I can't change it myself because I need a mercedes tool for that.... wonder what kind of tool and is't true?
Regarding the shifter knob... somebody told me that the knob must pulled up if you want and need to take it of??..
Have somebody change the shifter before.... I have heard that inside the shifter there is a small plastic pin which is of and it worthless to glue it again.
Juha
Super Member
Joined: Feb 2007
Posts: 871
Likes: 0
From: SoCal
W124 E500 (RIP), W211 E350 (Sold), R230 SL55 (Current)
You don't have to change the whole shifter juha, an inexpensive way would be to just replace the plastic gear selector with a new piece. Did mine a few weeks ago.
Trending Topics
Super Member
Joined: Jan 2012
Posts: 883
Likes: 24
From: Finland
SL600 / SL450 (107) / E350 / BMW M5 E60 / BMW 745i (E23) / BMW X6M / Toyota Hilux 4 WD/ Honda CBX 10
Is't a plastic pin which are of when I can't move the shifter?
I can heard and feel something happen which the shifter when I push the break pedal.
If it so I wonder where the plastic pin is.... is't inside the shifter shaft or is't somewhere beside the shifter?
If I have time tomorrow I'm gone try to fix it...
PS. Mercedes told me that I must buy a complete new shifter.... and I can't buy spare part inside the shifter.
Juha
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Super Member
Joined: Feb 2007
Posts: 871
Likes: 0
From: SoCal
W124 E500 (RIP), W211 E350 (Sold), R230 SL55 (Current)
The reason they tell you to buy a new shifter is because the new piece is not OEM, and you can't buy it from the dealer. The plastic piece is located inside the shifter assembly so all of that has to be disassembled. If you are pretty handy with cars it will take about 2 hours to replace the part.
Super Member
Joined: Jan 2012
Posts: 883
Likes: 24
From: Finland
SL600 / SL450 (107) / E350 / BMW M5 E60 / BMW 745i (E23) / BMW X6M / Toyota Hilux 4 WD/ Honda CBX 10
The reason they tell you to buy a new shifter is because the new piece is not OEM, and you can't buy it from the dealer. The plastic piece is located inside the shifter assembly so all of that has to be disassembled. If you are pretty handy with cars it will take about 2 hours to replace the part.
I'm gone try to do that ...
Juha
Super Member
Joined: Feb 2007
Posts: 871
Likes: 0
From: SoCal
W124 E500 (RIP), W211 E350 (Sold), R230 SL55 (Current)
I think this was the one I purchased.
http://www.ebay.com/itm/MERCEDES-BENZ-ESM-GEAR-SELECTOR-RELEASE-LEVER-2002-2006-W220-S430-C215-R230-/150891252867?pt=Motors_Car_Truck_Parts_Accessories&hash=item2321d1cc83&vxp=mtr
You can get them in aluminum too so they probably won't break again, but I heard those might chatter in the shifter box as they are a bit heavier.
http://www.ebay.com/itm/MERCEDES-BENZ-ESM-GEAR-SELECTOR-RELEASE-LEVER-2002-2006-W220-S430-C215-R230-/150891252867?pt=Motors_Car_Truck_Parts_Accessories&hash=item2321d1cc83&vxp=mtr
You can get them in aluminum too so they probably won't break again, but I heard those might chatter in the shifter box as they are a bit heavier.
Super Member
Joined: Jan 2012
Posts: 883
Likes: 24
From: Finland
SL600 / SL450 (107) / E350 / BMW M5 E60 / BMW 745i (E23) / BMW X6M / Toyota Hilux 4 WD/ Honda CBX 10
I think this was the one I purchased.
Mercedes Benz ESM Gear Selector Release Lever 2002 2006 W220 S430 C215 R230 | eBay
You can get them in aluminum too so they probably won't break again, but I heard those might chatter in the shifter box as they are a bit heavier.
Mercedes Benz ESM Gear Selector Release Lever 2002 2006 W220 S430 C215 R230 | eBay
You can get them in aluminum too so they probably won't break again, but I heard those might chatter in the shifter box as they are a bit heavier.
This help me a lot...
Regards
Juha
Last edited by Ekselent; Sep 30, 2013 at 07:30 PM.
Thread Starter
Junior Member
Joined: Dec 2011
Posts: 39
Likes: 1
From: Alexandria, Virginia USA
2003 SL55 AMG
For what it's worth, I had a difficult time disconnecting the shifter assembly from the shift linkage. Anybody who attempts this repair should be prepared for some pain and frustration. I did it from inside the car, but it was not easy.
Super Member
Joined: Jan 2012
Posts: 883
Likes: 24
From: Finland
SL600 / SL450 (107) / E350 / BMW M5 E60 / BMW 745i (E23) / BMW X6M / Toyota Hilux 4 WD/ Honda CBX 10
It was very difficult to take of the shifter.... but now it's on my desk.
I found the broken part also.... and I can't understand why and how can they build the shifter so inefficient and poorly! It was a hard work but I have decide to buy a new part from Ebay and change it. You must lose few screws and I drilled two staples of and then you can take of the broken part. Here in Finland new shifter cost 970 Eur.....
Here few pictures how it's look inside the shifter and you can also see the broken plastic part.
I found the broken part also.... and I can't understand why and how can they build the shifter so inefficient and poorly! It was a hard work but I have decide to buy a new part from Ebay and change it. You must lose few screws and I drilled two staples of and then you can take of the broken part. Here in Finland new shifter cost 970 Eur.....
Here few pictures how it's look inside the shifter and you can also see the broken plastic part.
Last edited by Ekselent; Oct 3, 2013 at 06:02 PM.
Member
Joined: Aug 2011
Posts: 75
Likes: 2
From: Ontario, Canada
2005 SL55 amg, 2009 Lincoln MXZ, 2012 Dodge 2500 Limited
I had mine replaced by MB a year ago. Thought it was the plastic piece that failed too, but it turned out to be the solenoid actuator that pushes on it had failed. MB did the change out and tried to keep my old shift box. No way, keeping it for parts down the road. One never knows. I considered exchanging it myself, but bailed after reading the DIY's. Need to get my confidence level a bit higher in regards to the DIY's on these cars as the price for MB mechanics is not impressing my bank account.
Super Member
Joined: Jan 2012
Posts: 883
Likes: 24
From: Finland
SL600 / SL450 (107) / E350 / BMW M5 E60 / BMW 745i (E23) / BMW X6M / Toyota Hilux 4 WD/ Honda CBX 10
Now when I have seen this part I'm afraid to use the shifter....
That plastic part is so thin build that I'm sure Mercedes have earn lot of money
That part should be made of thicker plastic... This shifter has been a gold mine for mercedes....
Juha
That plastic part is so thin build that I'm sure Mercedes have earn lot of money
That part should be made of thicker plastic... This shifter has been a gold mine for mercedes....
Juha
Last edited by Ekselent; Oct 1, 2013 at 04:21 AM.
Thread Starter
Junior Member
Joined: Dec 2011
Posts: 39
Likes: 1
From: Alexandria, Virginia USA
2003 SL55 AMG
As Juha said -- the manufacturer replaced some of the internal screws with rivets.
If you watch the youtube video, one side has a plastic plate held on by three screws. On mine, it had two screws and a rivet. I had to drill out the rivet.
On the other side of the metal cover plate, there's a metal tab held in place by another rivet. I ended up cutting off the metal tab.
While I was doing this job, I kept thinking that the designers really went out of their way to make it difficult. My brother (a senior GM mechanic) tells me some of those "features" are there to deter theft. I think it might deter me from buying another old Mercedes!
If you watch the youtube video, one side has a plastic plate held on by three screws. On mine, it had two screws and a rivet. I had to drill out the rivet.
On the other side of the metal cover plate, there's a metal tab held in place by another rivet. I ended up cutting off the metal tab.
While I was doing this job, I kept thinking that the designers really went out of their way to make it difficult. My brother (a senior GM mechanic) tells me some of those "features" are there to deter theft. I think it might deter me from buying another old Mercedes!
MBWorld Fanatic!
Joined: Sep 2006
Posts: 1,921
Likes: 173
From: Long Island New York
2003 SL55,2020 GTC ,2017 GTS sold ,2002 G500 Sold,2003 SL500 Sold,
Shifter
I just took mine out altogether its a lot easier to set it up on my lift now no more having to press brake to put in neutral
Super Member
Joined: Jan 2012
Posts: 883
Likes: 24
From: Finland
SL600 / SL450 (107) / E350 / BMW M5 E60 / BMW 745i (E23) / BMW X6M / Toyota Hilux 4 WD/ Honda CBX 10
Change that plastic part in the car without take it of is high-performance job
I think I can do it now when I now which part is broken and which part I must change.
I also did one mistake... when I tried to take of the shifter knob (Keyless) I turn the knob and the cables cut of.... Today I'm gone look at that and try to solve the problem.... Maybe I must draw new cable to the knob start/stop button.
The knob released when you pull it up and hard .... don't turn it.
Juha
Last edited by Ekselent; Oct 1, 2013 at 04:23 AM.
Super Member
Joined: Feb 2011
Posts: 571
Likes: 5
From: Sweden
SL55AMG + SL600 + E320 + A180
I had mine replaced by MB a year ago. Thought it was the plastic piece that failed too, but it turned out to be the solenoid actuator that pushes on it had failed. MB did the change out and tried to keep my old shift box. No way, keeping it for parts down the road. One never knows. I considered exchanging it myself, but bailed after reading the DIY's. Need to get my confidence level a bit higher in regards to the DIY's on these cars as the price for MB mechanics is not impressing my bank account.
http://www.startekinfo.com/StarTek/o...stedDocId=9124
Super Member
Joined: Jan 2012
Posts: 883
Likes: 24
From: Finland
SL600 / SL450 (107) / E350 / BMW M5 E60 / BMW 745i (E23) / BMW X6M / Toyota Hilux 4 WD/ Honda CBX 10
It was very difficult to take of the shifter.... but now it's on my desk.
I found the broken part also.... and I can't understand why and how can they build the shifter so inefficient and poorly! It was a hard work but I have decide to buy a new part from Ebay and change it. You must lose few screws and I drilled two staples of and then you can take of the broken part. Here in Finland new shifter cost 970 Eur.....
Here few pictures how it's look inside the shifter and you can also see the broken plastic part.
I found the broken part also.... and I can't understand why and how can they build the shifter so inefficient and poorly! It was a hard work but I have decide to buy a new part from Ebay and change it. You must lose few screws and I drilled two staples of and then you can take of the broken part. Here in Finland new shifter cost 970 Eur.....
Here few pictures how it's look inside the shifter and you can also see the broken plastic part.
I don't want change this part again.
Here is the link http://www.ebay.com/itm/170979696411...E:3160&vxp=mtr
Juha
Last edited by Ekselent; Oct 4, 2013 at 04:26 AM.
Super Member
Joined: Feb 2011
Posts: 571
Likes: 5
From: Sweden
SL55AMG + SL600 + E320 + A180
I ordered already the plastic OEM part but now later I found the aluminum selector to and order it.
I don't want change this part again.
Here is the link http://www.ebay.com/itm/170979696411...E:3160&vxp=mtr
Juha
I don't want change this part again.
Here is the link http://www.ebay.com/itm/170979696411...E:3160&vxp=mtr
Juha
