SL55/63/65/R230 AMG: I need help, very confused
Between my coolers ( aluminium boxes at the back of the engine ) I have
a cap, just like a radiator cap. I also have a valve on one pipe like a bike wheel that should have a cap as my 600 does.
When they say bleed the system do you join a pipe on to the valve, and
where is the reservoir to drain fluid to. Do I need to take off the cap to fill
the systems, It is so difficult without pictures.
Help would be appreciated.
My question is if this is the correct pump?: http://www.autohausaz.com/search/pro...20Water%20Pump
If it is not the correct pump with the higher capacity, can someone point in the right direction on where to get it?
Thx,
EDIT: In case the pictures for the post disappears, I have printed it out to a PDF.
Last edited by sgaar; Jun 6, 2014 at 03:13 PM.
My question is if this is the correct pump?: http://www.autohausaz.com/search/pro...20Water%20Pump
If it is not the correct pump with the higher capacity, can someone point in the right direction on where to get it?
Thx,
My question is if this is the correct pump?: http://www.autohausaz.com/search/pro...20Water%20Pump
If it is not the correct pump with the higher capacity, can someone point in the right direction on where to get it?
Thx,
EDIT: In case the pictures for the post disappears, I have printed it out to a PDF.
Trending Topics
The Best of Mercedes & AMG
On my '07, there is no way to get to the pump unless you take half of the car apart...well, the bumper need to come off.
I look like when MB did the facelift starting in '07, they changed more than just the bumper and such. Some of the internals was also moved around. The pump can be seen from the bottom, but you cannot get to it.
I have attached some pics and as you can see, it is inaccessible.



