*** 80mm AMG Throttle Body ***
#552
Super Member
No, just an inspection and some cleaning. I used sensor safe blue silicone on the super-charger output to inter-cooler mouth.
The factory used some type of black gunk which beaded into the chamber.
Just remove clean and reapply safe blue "sparingly!"
Did I explain correctly...?
The factory used some type of black gunk which beaded into the chamber.
Just remove clean and reapply safe blue "sparingly!"
Did I explain correctly...?
#553
MBWorld Fanatic!
Join Date: Jan 2002
Location: Carefree az usa
Posts: 1,089
Likes: 0
Received 22 Likes
on
18 Posts
2020 S560,14 ml350, 03 sl55, silver, pano, slr cams, evo headers, lsd, 2019 s63 cab.
Victor- when i get the new kit from you i wanted to take the old tb and bore it out to use on my s55. if i was bore out to 76mm or so do you have the change the throttle plate to be larger or just let the gap be around the plate.
#554
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
You may or may not be able to do this. If your car has the solid 1 piece TB that is epoxied together you wont be able to pull it apart to port it.
The only way to know for sure is once you get it out of the car and inspect it.
If you do port the TB and put it in the other car, you should really port match the S/C inlet otherwise there is no real benefit.
The only way to know for sure is once you get it out of the car and inspect it.
If you do port the TB and put it in the other car, you should really port match the S/C inlet otherwise there is no real benefit.
#555
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
All parts for the 13 remaining kits have arrived from Germany.. I have 10 of the 13 kits in my possession.. 3 kits still need to be picked up..
I have the machine shop working on making 15 adapter plates (that's only 2 extras) and they are going to be ready today.
Tomorrow I will dissassemble the Inlets (remove all the plastic pieces) and prepare them to be welded and hopefully drop them off at the welder.
I have the machine shop working on making 15 adapter plates (that's only 2 extras) and they are going to be ready today.
Tomorrow I will dissassemble the Inlets (remove all the plastic pieces) and prepare them to be welded and hopefully drop them off at the welder.
#557
Senior Member
Join Date: Jul 2006
Location: SF Bay Area
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
06 E55 SOLD, 89 300 SE 375,000 miles
All parts for the 13 remaining kits have arrived from Germany.. I have 10 of the 13 kits in my possession.. 3 kits still need to be picked up..
I have the machine shop working on making 15 adapter plates (that's only 2 extras) and they are going to be ready today.
Tomorrow I will dissassemble the Inlets (remove all the plastic pieces) and prepare them to be welded and hopefully drop them off at the welder.
I have the machine shop working on making 15 adapter plates (that's only 2 extras) and they are going to be ready today.
Tomorrow I will dissassemble the Inlets (remove all the plastic pieces) and prepare them to be welded and hopefully drop them off at the welder.
#558
MBWorld Fanatic!
Join Date: Apr 2006
Location: Central New Jersey
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
CLK63 Black, E350 Wagon, Supercharged Denali, Lotus Elise, Tesla Model 3 Dual-Motor.
I dropped off the car to have the "V80mm" T/Body installed over the weekend. Now I'm feeling like... I'm waiting for the great Dolemite on Halloween Eve...
#561
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
TB's will be going through porting this coming week.. They should be shipping by the end of the week.
All future TB kits will have a 1 week turn-around time after these kits are done. I've found a way to eliminate some steps and refine the kit further. I will be able to do 1-at-a-time kits again now that some new stuff has fallen in my lap.
All future TB kits will have a 1 week turn-around time after these kits are done. I've found a way to eliminate some steps and refine the kit further. I will be able to do 1-at-a-time kits again now that some new stuff has fallen in my lap.
#562
Senior Member
Join Date: Mar 2004
Location: Palm Beach Gardens, Fla.
Posts: 385
Likes: 0
Received 1 Like
on
1 Post
2004 E55
Yes - with the K3VRP set-up my best dyno runs were 528rwhp/595rwtq in 70 degree weather..... For grins I went to a neighbor business this morning who had just put in a 4 wheel "Mustang" dyno (He works alot on rice-burners)
and the car was literally not able to dyno as each time you would "throttle-up f/2k rpms....the tires (295/30/19's - PS2's) would actually start to simply break loose and "spin freely" on the mustang dyno. We then put 500lbs of people in the back seat...drop tire pressure to 25lbs....and @throttle-up, the car was actually creating wheel-hop
needless to say, after 5 pulls we finally gave up.
The dyno was a "small wheel" dyno and I really need to find a "large wheel" dyno to test the ANIMAL in my car
I did a test on the way home this afternoon in 82 degree weather and ran a 121+ trap speed in the 1/4mi. I NEVER could do that kind of trap in 80+ temps with the stock TB. - This 80MM VRUS TB is the real deal!!
#564
Senior Member
Join Date: Mar 2004
Location: Palm Beach Gardens, Fla.
Posts: 385
Likes: 0
Received 1 Like
on
1 Post
2004 E55
Needless to say K2 with VRUS TB's has truly brought us all to a new level....and it's so much fun to enjoy it!! Thanks Victor again for making this so easily "plug-n-play"
and while I'm throwing out congrats.....did I tell you how GREAT my car from top to bottom looks since Chris @C2Designs in Tampa did the interior?.....I know I did but he deserves another "plug" .... Thanks Chris!!
#565
Administrator
Just wanted to post the results (in this thread) that I achieved with Victor's AMG throttle body. It proved to be more than just a butt dyno improvement. https://mbworld.org/forums/w211-amg/169502-proof-positive-80mm-tb-works-time-slips.html
#566
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Kit #24 goes to Ted Baldwin.
I am just ecstatic that you guys are enjoying the mod... All your cars sound just insane based on the power they are putting down.
I have revised the kit even further now.. Lead time to make them now will be 1.5 weeks based on delivery of goods from Germany. (It takes 1 - 1.5 weeks for parts to arrive with normal delivery). Because of these new designs I can do one-offs again if needed..
It will either be Kit #24 or Kit #25 which will be the new revised one.. There will no longer be a 3/8" adapter plate for the kit. I have a new 1-piece cast part that will replace the stock inlet. I'll show a pic of it once I get it back from the manufacturer.. It's a surprise..
I am just ecstatic that you guys are enjoying the mod... All your cars sound just insane based on the power they are putting down.
I have revised the kit even further now.. Lead time to make them now will be 1.5 weeks based on delivery of goods from Germany. (It takes 1 - 1.5 weeks for parts to arrive with normal delivery). Because of these new designs I can do one-offs again if needed..
It will either be Kit #24 or Kit #25 which will be the new revised one.. There will no longer be a 3/8" adapter plate for the kit. I have a new 1-piece cast part that will replace the stock inlet. I'll show a pic of it once I get it back from the manufacturer.. It's a surprise..
#567
Senior Member
Join Date: Jul 2006
Location: SF Bay Area
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
06 E55 SOLD, 89 300 SE 375,000 miles
Kit #24 goes to Ted Baldwin.
I am just ecstatic that you guys are enjoying the mod... All your cars sound just insane based on the power they are putting down.
I have revised the kit even further now.. Lead time to make them now will be 1.5 weeks based on delivery of goods from Germany. (It takes 1 - 1.5 weeks for parts to arrive with normal delivery). Because of these new designs I can do one-offs again if needed..
It will either be Kit #24 or Kit #25 which will be the new revised one.. There will no longer be a 3/8" adapter plate for the kit. I have a new 1-piece cast part that will replace the stock inlet. I'll show a pic of it once I get it back from the manufacturer.. It's a surprise..
I am just ecstatic that you guys are enjoying the mod... All your cars sound just insane based on the power they are putting down.
I have revised the kit even further now.. Lead time to make them now will be 1.5 weeks based on delivery of goods from Germany. (It takes 1 - 1.5 weeks for parts to arrive with normal delivery). Because of these new designs I can do one-offs again if needed..
It will either be Kit #24 or Kit #25 which will be the new revised one.. There will no longer be a 3/8" adapter plate for the kit. I have a new 1-piece cast part that will replace the stock inlet. I'll show a pic of it once I get it back from the manufacturer.. It's a surprise..
Victor,
What would the one pc SC Inlet cost. What I was thinking was buying the SC Inlet off the new 07 SL55 and seeing if they work. I know that these come with the 80mm throttle bodys.
D
#568
Super Member
#569
MBWorld Fanatic!
Join Date: Apr 2006
Location: Central New Jersey
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
CLK63 Black, E350 Wagon, Supercharged Denali, Lotus Elise, Tesla Model 3 Dual-Motor.
Hey Guys... Car was fired up yesterday....
All seems well, no lights, bells or bad messages from the ECU...
"VIC's the MAN"...
After installing T/Body turn key to on position without starting for 90 seconds for ECU check's and balance's to occur...
Just got to finish the IPOD & SIRRUS installs and start enjoying the new performance and sounds...
All seems well, no lights, bells or bad messages from the ECU...
"VIC's the MAN"...
After installing T/Body turn key to on position without starting for 90 seconds for ECU check's and balance's to occur...
Just got to finish the IPOD & SIRRUS installs and start enjoying the new performance and sounds...
#570
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Not sure of exact pricing yet.. I'll post a pic very soon of the revised part..
Congrats!!! Glad to hear everything went smooth.. Go drive it now and tell me what you think.. Car will feel alot better now that it is gulping alot more air..
Originally Posted by MACHC5
Hey Guys... Car was fired up yesterday....
All seems well, no lights, bells or bad messages from the ECU...
"VIC's the MAN"...
After installing T/Body turn key to on position without starting for 90 seconds for ECU check's and balance's to occur...
Just got to finish the IPOD & SIRRUS installs and start enjoying the new performance and sounds...
All seems well, no lights, bells or bad messages from the ECU...
"VIC's the MAN"...
After installing T/Body turn key to on position without starting for 90 seconds for ECU check's and balance's to occur...
Just got to finish the IPOD & SIRRUS installs and start enjoying the new performance and sounds...
#571
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
All inlets are at the porting shop and have the welding complete.
Picking up 5 or 6 of the ported inlets tomorrow and will pack them and get them ready for the new owners..
Picking up 5 or 6 of the ported inlets tomorrow and will pack them and get them ready for the new owners..
#572
MBWorld Fanatic!
Join Date: Jan 2002
Location: Carefree az usa
Posts: 1,089
Likes: 0
Received 22 Likes
on
18 Posts
2020 S560,14 ml350, 03 sl55, silver, pano, slr cams, evo headers, lsd, 2019 s63 cab.
vic- just wanted to make sure you got my email. i will be closing my business from 11-16 till 11-25 for vacation. please hold my shipment for past these dates. thanks
#573
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Kit #25 goes to Scarafin
Just got a call from the porting shop.. 8 inlets are ported and ready to go.. I am going to pick them up later this afternoon.. I'll get everything ready and packed and should be able to get them all out for tomorrow.
These are the recipients of the 8 kits:
- Jspeed
- Loren
- e55 baller
- E55 Russ
- Fleebee
- jmf003
- rflow306
- clum553946
The remaining kits have the following status:
- GhettoDreams: porting
- mbamg06e55: porting
- Mad TKD : porting
- chiromikey: porting
- theboogers: porting
- Cosm: porting
- ted baldwin: waiting for parts from Germany
- Scarafin: waiting for parts from Germany
---------------------------
Got your message... Kit will be waiting for you when you get back. Have a great vacation.
Just got a call from the porting shop.. 8 inlets are ported and ready to go.. I am going to pick them up later this afternoon.. I'll get everything ready and packed and should be able to get them all out for tomorrow.
These are the recipients of the 8 kits:
- Jspeed
- Loren
- e55 baller
- E55 Russ
- Fleebee
- jmf003
- rflow306
- clum553946
The remaining kits have the following status:
- GhettoDreams: porting
- mbamg06e55: porting
- Mad TKD : porting
- chiromikey: porting
- theboogers: porting
- Cosm: porting
- ted baldwin: waiting for parts from Germany
- Scarafin: waiting for parts from Germany
---------------------------
Got your message... Kit will be waiting for you when you get back. Have a great vacation.
#575
Member
Join Date: May 2004
Location: New York City
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
'03 E55 AMG
Wow!
It's back and according to the tech who did the 80 MM TB install, he has never been in a faster car in his life! It even sounds faster. For sure it will torch Ken's 55 head to head Now it's off to the Dyno on Friday
Thanks Victor for all the R&D you put into this and for making it actually happen!
Thanks Victor for all the R&D you put into this and for making it actually happen!