Moded E55 vs ZO6, Hamann M6, MTM RS6, M5....
#1
MBWorld Fanatic!
Thread Starter
Moded E55 vs ZO6, Hamann M6, MTM RS6, M5....
Hello guys...It happaned
Last night had many races with Evotech SL 680HP on 21 Lorinser wheels, Нamann M6 567HP, stock M5, MTM 525HP RS6 and stock C6 Z06....
Beat all of them them in 1/4 races on highway !!!
Although...once came neck to neck in 1/4 with Evotech SL55 and Z06 could not always hook up properly...
Did couple of rolling starts and Hamann M6 and ZO6 and they only faster then moded E55 (stage 2 - Headers, Chip and Pulley) passed 145-150MPH !!! From the start without LC it would never catch up till I went TOP speed, did 195 (320km)...I could pull more but some traffic emerged...
Rolling starts 1st gear Hamann M6 catches up at 145 and pulls like a freight train after 150......from 1st gear I pull like 3-4 cars, then M6 slowly catches up...
Same with ZO6...1,2, 3rd I pull on him and then he slowly catches up, get 2 car up front at 160 and we stay like that till 185 or so...doesnt pull away like tuned M6...
From the start Me and Z06 leave tuned M6 in dust, cause this guy doesnt like to use LC...
SO I dont know HOW come Kleemann K4 E55 which as said on M5 board had 620 HP could loose to stock M6 rolling start to 150
Need to do something to E55 to make it moire faster on TOP...this Evotech SL has some Transmisson programming done as well...
![action](https://mbworld.org/forums/images/smilies/action1.gif)
Last night had many races with Evotech SL 680HP on 21 Lorinser wheels, Нamann M6 567HP, stock M5, MTM 525HP RS6 and stock C6 Z06....
Beat all of them them in 1/4 races on highway !!!
![action](https://mbworld.org/forums/images/smilies/action1.gif)
Although...once came neck to neck in 1/4 with Evotech SL55 and Z06 could not always hook up properly...
Did couple of rolling starts and Hamann M6 and ZO6 and they only faster then moded E55 (stage 2 - Headers, Chip and Pulley) passed 145-150MPH !!! From the start without LC it would never catch up till I went TOP speed, did 195 (320km)...I could pull more but some traffic emerged...
Rolling starts 1st gear Hamann M6 catches up at 145 and pulls like a freight train after 150......from 1st gear I pull like 3-4 cars, then M6 slowly catches up...
Same with ZO6...1,2, 3rd I pull on him and then he slowly catches up, get 2 car up front at 160 and we stay like that till 185 or so...doesnt pull away like tuned M6...
From the start Me and Z06 leave tuned M6 in dust, cause this guy doesnt like to use LC...
SO I dont know HOW come Kleemann K4 E55 which as said on M5 board had 620 HP could loose to stock M6 rolling start to 150
![bs](https://mbworld.org/forums/images/smilies/bs.gif)
Need to do something to E55 to make it moire faster on TOP...this Evotech SL has some Transmisson programming done as well...
Last edited by E55 RUSS; 10-07-2006 at 01:19 PM.
#2
MBWorld Fanatic!
Join Date: Mar 2005
Location: strip bar in Oregon
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
211 E55(sold) & 80cc shifter kart
i'm moving to russa! to many bitt$ch *** rules here in the US, know one can have fun anymore with out some trick calling the cops on you! E55 russ Got a extra room for me?
#5
![wall](https://mbworld.org/forums/images/smilies/banghead.gif)
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
Guys you are all Welcome !!! Just dont forget to bring you beast here, so we can have some fun...
SL55 once start pulling on ME slowly...The funny thin is that, when I only had Headers done, I spanked him 3 times in a row badly...Then they brought Evotech specialist here, he did some ECU and transmission re-progarmming and in the 1st race we runned neck to neck and he pulled on me a bit after 125...I got upset, that something is wrong but then next 3 times I beat him...
So I wonder could some ECU re-programming make the car much faster that even with pulleys we runned even...to be honest with extra POWER from pulleys I expected to beat him badly...so this bring Me to the question
May be my ECU is not good ??? This SL has alll Cats removed, could deletion or secondary cats make this dufference on TOP ???
I have got one vid with Z06 I will upload it and post it later...
SL55 once start pulling on ME slowly...The funny thin is that, when I only had Headers done, I spanked him 3 times in a row badly...Then they brought Evotech specialist here, he did some ECU and transmission re-progarmming and in the 1st race we runned neck to neck and he pulled on me a bit after 125...I got upset, that something is wrong but then next 3 times I beat him...
So I wonder could some ECU re-programming make the car much faster that even with pulleys we runned even...to be honest with extra POWER from pulleys I expected to beat him badly...so this bring Me to the question
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
I have got one vid with Z06 I will upload it and post it later...
#9
Newbie
The E Klass is 200 kg lighter then an sl and the traction is on the E-klass much better that shows that the 650/680 hp there specially when you lose the 1/4 ........
Normally when you compare the 2 cars both in stock the e klass is the fastest one give the sl all times an 1/2 car ....
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Normally when you compare the 2 cars both in stock the e klass is the fastest one give the sl all times an 1/2 car ....
![devil](https://mbworld.org/forums/images/smilies/devil.gif)
#12
MBWorld Fanatic!
Thread Starter
Hey..where did you get those photos ???
The Silver SL55 is the one I raced and white SL55 FAB desgn is the one which is even more powerfull but unfromunately it BLEW UP while it was racing with ZO6...
Last pics was taken on Dyno...
I spoke with one of Evotech guys is Russia, but when I asked them "what is done to silver SL55???" and they answered "when you become out client we tell you"
They got ME disapointed...At the end they told what is done but this not the people that I would do business with...too sneaky for ME...
The Silver SL55 is the one I raced and white SL55 FAB desgn is the one which is even more powerfull but unfromunately it BLEW UP while it was racing with ZO6...
Last pics was taken on Dyno...
I spoke with one of Evotech guys is Russia, but when I asked them "what is done to silver SL55???" and they answered "when you become out client we tell you"
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
#13
MBWorld Fanatic!
Well, lets just say i know the evotech specialist you talking about. ![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
The Evotech guys are nice; they just dont want to leak any trade secrets i suppose.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
The Evotech guys are nice; they just dont want to leak any trade secrets i suppose.
#14
MBWorld Fanatic!
Thread Starter
I know who you taalking about...well when I asked about ECU for my car...they told that only do ECu for the cars they tune...+ all of thier car had probs and been spanked by others...now they say they fixed them but WHITE SL still BLEW UP !!! So I dont have any confidence in them sorry...
#15
Newbie
Not really the engine was blown up the have already 70.000 km and the oil consumption was 2l at 1000 km we decide after an small pressure leak to the piston to over hole the engine ...was not blown up and the customer who buys the car wants an engine with 0 km .....thats easy is it ......or the dont drive home from the race ?
#16
MBWorld Fanatic!
Thread Starter
Yeah..whatever...After coupleof WOT of runs...White smoke came from the exhausts and engine bay...and the car is undrivable anymore...many part need to be replaced...