BiTurboAmg

I found the thread where Jangy got it put in but no pics of the box or how it looked or where it was etc? Any one have any pics of this?

jangy

I'll post some tonight. It is mounted facing down up under the passenger leg area. It has knobs extended through the box so it can be adjusted on the fly.

jangy

Sorry for the delay..

Bipasha493

hey jangy...with the ELM module...do you notice when you activate the "raise button" the car doesent raise as high as it did before without the module?

Bipasha493

another thing...did you have to extend the wire harness to mount it there or was it long enough?

jangy

It still raises the same abount that it did, just not to the same point that it did. If the car is lowered by ELM and I hit raise it simply saises up 2" or so. It does not raise to 2" above stock height.

jangy

I did not do the install, but the wires were long enough as is. The Airmatic module is under that floor board, so the wires just come around the corner. I plan to move the ELM into the arm rest and so a new harness is being made. I am also adding a true harness fitting onto the end so that it is plug and play in-line of the OEM module so that there is no need to splice. i will also replace the old OEM wiring at that time to clean it all up.

Bipasha493

thanks for the inputs...have mines installed to....havent gotten time to do a stealth install like yours though...problaby by this week..

BiTurboAmg

Thanks Jangy, I am lookig to see if I extend my harness if I can install in my armrest as well so I an just adjust any time. I am doing my own install so I will have to see how much work I want to put into this. Do you know if there is a reason the harness is so short? Does it need to be close to the factory box and if we extend the wires will the signal get weaker etc??

2K6E55

Jangy,

I thought you had La Jolla Audio moved the ELM module to the center console?

BenzoBoi

Nice and stealthy...

looks good Jangy...

medici78

How would you rate the ride quality with the ELM? Any difference from stock? Bouncier, etc.?

jangy

Nope, RENNTech didn't develop it to be a shift on the fly system. I wanted it that way and my original tuner went ahead and tried it and it worked (extending the knobs). You can definitely extend the harness. Just use nicely insulated wires so you don't get cross talk. You will need to remove the passenger seat to access the arm rest.

jangy

They are making the new harness and repairing the old wiring, but we stopped on install since I am mounting the rear dvd players, sub & amp, and video cameras in the front and rear bumpers.

jangy

Tighter with more grip (more negative camber). Definitely not bouncier. The beauty is that you can have a low ride and keep it in comfort mode so you don't get the teeth shatter ride. You can also go all out and go low and SII when the roads are fairly smooth. It really is a great tuning piece when used along with the OEM buttons.

jangy

Thanks bro. Again, i didn't do the install. I just had the idea and asked about it. I was hoping it was step 1 in getting a relationship going but you know how it is when you wake up and she just isn't quite as cute as the night before!!

JamE55

Let's see some pics of the whole car lowered with the ELM. That would look sick!

jangy

Here's the only pic I have with me here. I'll post more when i get home and get to relax!!

jangy

Ok, more pics:

DBrasco

What type of ELM do you have again? And how much does it usually run? Thnx

JamE55

Looks !

jangy

It is the RENNTech ELM with the modified knobs. I tried talking to RENNTech about making the knobs a standard feature, but got blown off as from most people. I'm looking to see how we can get it for everyone.

The cost is about $1200 (introductory price) installed, depending on where and who you get it from.

x-tian-230k

Jangy are your rims dirty or are they powder coated that color?

jangy

They are powder coated. It was an experiment in color.

DBrasco

So does Renntech or Kleeman give the most drop?